Hardware

Sort By:  
46627XL.jpg
Barton Marine - Barton Marine - 165mm (6.5") Nylon Sliding Cleat Fits 25mm (0.98") 'T' Track (46627)
Nylon Sliding Cleats - 165mm (6.5")

A cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simplyremove a genoa track end stop, slide on the cleat and lock it in the desired position.
When not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easyremoval of cleat.
Alternatively, fit a short length of track in the desired position so that cleats can be fitted when required andremoved when not in use - reducing deck clutter and rope snags.

25mm (0.98") cleats have an extruded aluminium base, nylon moulded cleat and screw type lock
$60.77
46628XL.jpg
Barton Marine - Barton Marine - 175mm (6.89") Aluminum Sliding Cleat Fits 32mm (1.26") 'T' Track (46628)
Aluminum Sliding Cleats - 175mm (6.89")

A cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simplyremove a genoa track end stop, slide on the cleat and lock it in the desired position.
When not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easyremoval of cleat.
Alternatively, fit a short length of track in the desired position so that cleats can be fitted when required andremoved when not in use - reducing deck clutter and rope snags.

32mm (1.26") cleats have an extruded aluminium base, cast aluminium cleat and plunger type lock.
$124.09
46631XL.jpg
Barton Marine - Barton Marine Stanchion Cleat (46631)
Stanchion Cleat - Nylon

Designed to fit stanchions or pushpit/pullpit tubes - fits in seconds and features soft nylon jaws that willnot damage the tube.
$26.47
46632XL.jpg
Barton Marine - Barton Marine Shroud Cleat (46632)
Shroud Cleats - Nylon

Plain cleat for flag halyards etc.
$19.85
46633XL.jpg
Barton Marine - Barton Marine Shroud Cleat w/Eye (46633)
Shroud Cleat w/Eye - Nylon

Features a wide eye opening for stowage of halyard shackles
$21.29
46636XL.jpg
Barton Marine - Barton Marine 12mm High Load Eye (46636)
High Load Eye - 12mm

Manufactured in marine grade aluminium and finished in our unique hard 'Spectro' grey anodising.These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes.
Out of Stock
$20.23
46637XL.jpg
Barton Marine - Barton Marine 16mm High Load Eye (46637)
High Load Eye - 16mm

Manufactured in marine grade aluminium and finished in our unique hard 'Spectro' grey anodising.These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes.
$20.43
46640XL.jpg
Barton Marine - Barton Marine Mini 'K' Cam Cleat (46640)
'K' Cam Cleats - Mini

Manufactured from a composite Kevlar/Zytal material. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are very strong, lightweight and have excellent wear-resistance. A progressive tooth design ensures maximum holding power on all types of line, whilst maintaining minimum wear to both cam and line.

'K' Cam Mini
Max Line Ø: 10mm (0.4")
FasteningsØ: 4mm (0.16")
Fastenings Center: 30mm (1.18")
Holding Power: 190kg (419.9lbs)
Weight: 17kg (37.5lbs)
$22.11
46641XL.jpg
Barton Marine - Barton Marine Midi 'K' Cam Cleat (46641)
'K' Cam Cleats - Midi

Manufactured from a composite Kevlar/Zytal material. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are very strong, lightweight and have excellent wear-resistance. A progressive tooth design ensures maximum holding power on all types of line, whilst maintaining minimum wear to both cam and line.

'K' Cam Midi
Max Line Ø: 6-12mm (0.24" - 0.47")
FasteningsØ: 5mm (0.20")
Fastenings Center: 40mm (1.57")
Holding Power: 230kg (507.06lbs)
Weight: 34kg (75lbs)
$24.31
46642XL.jpg
Barton Marine - Barton Marine Maxi 'K' Cam Cleat (46642)
'K' Cam Cleats - Maxi

Manufactured from a composite Kevlar/Zytal material. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are very strong, lightweight and have excellent wear-resistance. A progressive tooth design ensures maximum holding power on all types of line, whilst maintaining minimum wear to both cam and line.

'K' Cam Maxi
Max Line Ø: 10mm - 14mm(0.4" - 0.55")
FasteningsØ: 5mm (0.20")
Fastenings Center: 50mm (1.97")
Holding Power: 260kg (573.20lbs)
Weight: 50kg (110.23lbs)
Out of Stock
$37.96
46643XL.jpg
Barton Marine - Barton Marine DO 550 Single Rope Clutch (46643)
Single Rope Clutch

Max Rope Diameter:Up 12mm(0.47")
Fastening: 6mm (0.24")
SWL:550kg (1,212.54lbs)

The Barton D0550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are from high grade plastics which are strong, light and impact-resistant. Cams and bases are from marine grade aluminium, 'Spectro' anodised for high wear resistance and long life.

The true clutch mechanism allows line to be adjusted through the unit in the closed, locked position with minimal slippage. Released under load is positive and requires little effort. The mechanism's opening and closing action is precise and easy to operate, even with cold wet hands. A positive handle lock in the closed position is also featured.

A unique feature of this design is the removable insert on the top face of the handle. Pop this out and you can easily replace with printed coloured inserts to denote at a glance the function of the unit (i.e main, genoa, spinnaker etc).

The clutch's cam and base, manufactured from high grade extruded aluminium, features a specially tempered tooth design which allows for maximum grip with minimal slippage, whilst being kind to your lines. Stainless steel rope fairleads are fitted to both line entry and exit points, this feature prevents wear to both clutch and lines.

The D0550 clutch features the advantage of a bolt together construction which allows for ease of servicing and replacement of parts.
Out of Stock
$115.55
46645XL.jpg
Barton Marine - Barton Marine DO 550 Triple Rope Clutch (46645)
Triple Rope Clutch

Max Rope Diameter:Up 12mm(0.47")
Fastening: 6mm x 6 (0.24" x 6)
SWL:550kg (1,212.54lbs)

The Barton D0550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are from high grade plastics which are strong, light and impact-resistant. Cams and bases are from marine grade aluminium, 'Spectro' anodised for high wear resistance and long life.

The true clutch mechanism allows line to be adjusted through the unit in the closed, locked position with minimal slippage. Released under load is positive and requires little effort. The mechanism's opening and closing action is precise and easy to operate, even with cold wet hands. A positive handle lock in the closed position is also featured.

A unique feature of this design is the removable insert on the top face of the handle. Pop this out and you can easily replace with printed coloured inserts to denote at a glance the function of the unit (i.e main, genoa, spinnaker etc).

The clutch's cam and base, manufactured from high grade extruded aluminium, features a specially tempered tooth design which allows for maximum grip with minimal slippage, whilst being kind to your lines. Stainless steel rope fairleads are fitted to both line entry and exit points, this feature prevents wear to both clutch and lines.

The D0550 clutch features the advantage of a bolt together construction which allows for ease of servicing and replacement of parts.
$313.01
52108XL.jpg
Davis Instruments - Davis Tiller Tamer (52108)
Tiller-Tamer

Maintains cruising course with no hands, in any weather or wind condition. The tension is smoothly adjustable from fully locked to fully free. Tiller-Tamer gives improved control and feel to the tiller handle. Does not interfere with automatic steering systems. No loss of cockpit space. No need to lash the tiller when boat is moored or trailered.
$25.29
52133XL.jpg
Davis Instruments - Davis Round Sail Track Stop (52133)
Round Sail Track Stops
Round 0.50" dia. x 0.875" (13 x 22mm)

When it's time to lower your sail you can rely on Davis' Round Sail Track Stop to hold your sail and its slides in place on the mast and boom. Large knurled wheels are released with ease. Made of heavy-duty, black anodized aluminum and marine garde nickel plated brass.
$7.65
52134XL.jpg
Davis Instruments - Davis Flat Small Sail Track Stop (52134)
Flat/Small Sail Track Stops
Flat/Small: 0.42 x 1 x 0.125" (11 x 25 x 3mm)

When it's time to lower your sail you can rely on Davis' Flat Sail Track Stops to hold your sail and its slides in place on the mast and boom. Large knurled wheels are released with ease. Made of heavy-duty, black anodized aluminum and marine garde nickel plated brass. Flat stops come with lanyard holes.
$7.65
54981XL.jpg
Ronstan - Ronstan Fairlead Black Plastic w/Stainless Steel Liner - 6.5mm (1/4") ID (54981)
Fairlead Black Plastic with Stainless Steel Liner - 6.5mm(1/4") ID

Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners provide greater abrasion resistance.

Materials:
  • Impact resistant, U.V. stablized Nylon
  • Stainless steel liner
$7.15
54982XL.jpg
Ronstan - Ronstan Fairlead Black Plastic w/Stainless Steel Liner - 8.5mm (5/16") ID (54982)
Fairlead Black Plastic with Stainless Steel Liner - 8.5mm(5/16") ID

Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners provide greater abrasion resistance.

Materials:
  • Impact resistant, U.V. stablized Nylon
  • Stainless steel liner

$8.06
54983XL.jpg
Ronstan - Ronstan Fairlead Black Plastic w/Stainless Steel Liner - 11.5mm (7/16") ID (54983)
Fairlead Black Plastic with Stainless Steel Liner - 11.5mm(7/16") ID

Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners provide greater abrasion resistance.

Materials:
  • Impact resistant, U.V. stablized Nylon
  • Stainless steel liner


$9.87
54984XL.jpg
Ronstan - Ronstan Fairlead Black Plastic w/Stainless Steel Liner - 14mm (1/2") ID (54984)
Fairlead Black Plastic with Stainless Steel Liner - 14mm(1/2") ID

Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines. Stainless steel liners provide greater abrasion resistance.

Materials:
  • Impact resistant, U.V. stablized Nylon
  • Stainless steel liner


$10.76
54987XL.jpg
Ronstan - Ronstan Twist On Jib Hank - 3mm (1/8") Wire (54987)
Twist On Jib Hank - 3mm(1/8") Wire

Piston hanks includes screws.

Applications:
Suitable for Keelboat, Dinghy and Trailerable yacht jibs

Materials:
Impact resistant, U.V. stablised Nylon
$1.95
54988XL.jpg
Ronstan - Ronstan Pacific Piston Hank - 6.4mm (1/4") Wire (54988)
Pacific Piston Hank - 6.4mm(1/4") Wire

Piston hanks includes screws.

Applications:
Suitable for Keelboat, Dinghy and Trailerable yacht jibs

Materials:
  • Impact resistant, U.V. stabilized Nylon
  • Brass Piston
$9.87
54989XL.jpg
Ronstan - Ronstan Pacific Piston Hank - 8mm (5/16") Wire (54989)
Pacific Piston Hank - 8mm(5/16") Wire

Piston hanks includes screws.

Applications:
Suitable for Keelboat, Dinghy and Trailerable yacht jibs

Materials:
  • Impact resistant, U.V. stabilized Nylon
  • Brass Piston

Out of Stock
$11.66
54990XL.jpg
Ronstan - Ronstan Flag/Sister Clip - 13mm (1/2") Eye Clearance (54990)
Flag/Sister Clip - 13mm(1/2") Eye Clearance

White
Impact resistant, U.V. stabilized nylon
$1.75
54992XL.jpg
Ronstan - Ronstan Glue-In Plastic Nylon Bush - Stainless Steel Lined - 4mm (5/32") ID x 14mm (9/16") Deep (54992)
Ronstan Glue-In Plastic Nylon Bush - Stainless Steel Lined - 4mm(5/32") ID x 14mm(9/16") Deep

Features:
  • Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
  • Manufactured from Nylon, styles and sizes to suit different rope diameters
  • Fairleads with stainless steel liners provide greater abrasion resistance
  • May be glued or pressed into place
  • Impact resistant, UV stabilized Nylon
Out of Stock
$7.15
54993XL.jpg
Ronstan - Ronstan Glue-In Plastic Nylon Bush - Stainless Steel Lined - 7mm (9/32") ID x 5mm (3/16") Deep (54993)
Ronstan Glue-In Plastic Nylon Bush - Stainless Steel Lined - 7mm(9/32") ID x 5mm(3/16") Deep

Features:
  • Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
  • Manufactured from Nylon, styles and sizes to suit different rope diameters
  • Fairleads with stainless steel liners provide greater abrasion resistance
  • May be glued or pressed into place
  • Impact resistant, UV stabilized Nylon
Out of Stock
$8.06
54994XL.jpg
Ronstan - Ronstan Glue-In Plastic Nylon Bush - Stainless Steel Lined - 7mm (9/32")ID x 14mm (9/16") Deep (54994)
Ronstan Glue-In Plastic Nylon Bush - Stainless Steel Lined - 7mm(9/32") ID x 14mm(9/16") Deep

Features:
  • Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
  • Manufactured from Nylon, styles and sizes to suit different rope diameters
  • Fairleads with stainless steel liners provide greater abrasion resistance
  • May be glued or pressed into place
  • Impact resistant, UV stabilized Nylon
Out of Stock
$8.06
54995XL.jpg
Ronstan - Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 7mm (9/32") ID x 5mm (3/16") Deep (54995)
Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 7mm(9/32") ID x 5mm(3/16") Deep

Features:
  • Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
  • Manufactured from Nylon, styles and sizes to suit different rope diameters
  • Fairleads with stainless steel liners provide greater abrasion resistance
  • Impact resistant, UV stabilized Nylon

Out of Stock
$10.95
54996XL.jpg
Ronstan - Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 7mm (9/32") ID x 14mm (9/16") Deep (54996)
Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 7mm(9/32") ID x 14mm(9/16") Deep

Features:
  • Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
  • Manufactured from Nylon, styles and sizes to suit different rope diameters
  • Fairleads with stainless steel liners provide greater abrasion resistance
  • Impact resistant, UV stabilized Nylon
Out of Stock
$11.95
54997XL.jpg
Ronstan - Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 11mm (7/16") ID x 5mm (3/16") Deep (54997)
Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 11mm(7/16") ID x 5mm(3/16") Deep

Features:
  • Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
  • Manufactured from Nylon, styles and sizes to suit different rope diameters
  • Fairleads with stainless steel liners provide greater abrasion resistance
  • Impact resistant, UV stabilized Nylon
Out of Stock
$12.95
54998XL.jpg
Ronstan - Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 11mm (7/16") ID x 14mm (9/16") Deep (54998)
Ronstan Screw-On Plastic Nylon Bush - Stainless Steel Lined - 11mm(7/16") ID x 14mm(9/16") Deep

Features:
  • Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
  • Manufactured from Nylon, styles and sizes to suit different rope diameters
  • Fairleads with stainless steel liners provide greater abrasion resistance
  • Impact resistant, UV stabilized Nylon
Out of Stock
$12.95
54999XL.jpg
Ronstan - Ronstan Glue-In Plastic Nylon Bush - Stainless Steel Lined - 11mm (7/16")ID x 14mm (9/16") Deep (54999)
Ronstan Glue-In Plastic Nylon Bush - Stainless Steel Lined - 11mm(7/16") ID x 14mm(9/16") Deep

Features:
  • Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
  • Manufactured from Nylon, styles and sizes to suit different rope diameters
  • Fairleads with stainless steel liners provide greater abrasion resistance
  • May be glued or pressed in place
  • Impact resistant, UV stabilized Nylon
Out of Stock
$10.76
55000XL.jpg
Ronstan - Ronstan Sail Slide - Internal Track - 16mm (5/8") Wide x 32mm(1-1/4") Long (55000)
Sail Slide - Internal Track - 16mm(5/8") Wide x 32mm(1-1/4") Long

Impact Resistant, U.V. Stabilized Nylon
White
$1.75
55001XL.jpg
Ronstan - Ronstan Sail Slide - Internal Track - 22mm (7/8") Wide x 42mm (1-21/32") Long (55001)
Sail Slide - Internal Track - 22mm(7/8") Wide x 42mm(1-21/32") Long

Impact Resistant, U.V. Stabilized Nylon
White
$1.75
55002XL.jpg
Ronstan - Ronstan Plastic Nylon Stay Bush - 10mm (3/8") Hole (55002)
Plastic Nylon Stay Bush - 10mm(3/8") Hole

Features:
  • Fairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control lines
  • Manufactured from Nylon, styles and sizes to suit different rope diameters
  • Nylon bushes provide chafe protection where lines pass through decks, bulkheadsor spars
  • Impact resistant, UV stabilized Nylon
$1.95
55007XL.jpg
ANDERSEN - ANDERSEN Mini Bailer - Outside Mount (55007)
Mini Bailer - Outside Mount

Flange Size: - 56 x 92mm (2-1/4 x 3-5/8")

The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.

ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.

Features:
  • Effective and reliable means of automatic bailing
  • Made of stainless steel and guaranteeing years of trouble free servicing
$79.95
55008XL.jpg
ANDERSEN - ANDERSEN Super Mini Bailer - Inside Mount (55008)
Super Mini Bailer - Indside Mount

Flange Size: - 61 x 106mm (2-7/16 x 4-3/16")

The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.

ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.

The Super Mini Special Bailer is designed for racing dinghies where the bailer is operated from a hiking position, this bailer is mounted without spring lever.

Features:
  • Effective and reliable means of automatic bailing
  • Made of stainless steel and guaranteeing years of trouble free servicing
$105.95
55009XL.jpg
ANDERSEN - ANDERSEN Super Medium Bailer - Inside Mount (55009)
Super Medium Bailer - Inside Mount

Flange Size: - 67 x 135mm (2-11/16 x 5-5/16")

The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.

ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.

Features:
  • Effective and reliable means of automatic bailing
  • Made of stainless steel and guaranteeing years of trouble free servicing
$125.95
55010XL.jpg
ANDERSEN - ANDERSEN Super Max Bailer - Inside Mount (55010)
Super Max Bailer - Inside Mount

Flange Size: - 78 x 135mm (3-1/8 x 5-5/16")

The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.

ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.

Features:
  • Effective and reliable means of automatic bailing
  • Made of stainless steel and guaranteeing years of trouble free servicing
$133.95
55011XL.jpg
ANDERSEN - ANDERSEN Large Bailer - Outside Mount (55011)
Large Bailer - Outside Mount

Flange Size: - 80 x 142mm (3-3/16 x 5-9/16")

The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.

ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.

Features:
  • Effective and reliable means of automatic bailing
  • Made of stainless steel and guaranteeing years of trouble free servicing
$105.95
55020XL.jpg
Ronstan - Ronstan Series 25 T-Track - Spinnaker Pole - Composite Slide & Stop - 102mm (4") (55020)
Series 25 T-Track - Spinnaker Pole - Composite Slide & Stop - 102mm (4")

For small keel boats and sports boats, T-Track jib lead and spinnaker pole slides are a great blend of performance and functionality in a simple, efficient package. Composite slide bodies with plunger stops run on an anodized aluminium track, and allow quick and easy manual adjustment.

Specifications:
  • Length: 102mm
  • M.W.L.: 400 kg
  • B.L.: 800 kg
  • Weight: 215 g
Out of Stock
$129.95
55021XL.jpg
Ronstan - Ronstan Series 25 T-Track - Track End Cap - Black (55021)
Series 25 T-Track - Track End Cap - Black

'Racing' track has 25mm(63/64") stop hole spacing for even more precise control of the car position and sheeting angle.

Track Fastenings:
5mm (3/16") countersunk fasteners at 100mm (3-15/16") centres

Materials:
Anodized alluminum alloy track
$3.95
55022XL.jpg
Ronstan - Ronstan Series 19 C-Track Slide - Saddle Top & Spring Loaded Stop - 71mm (2-25/32") Length (55022)
Series 19 C-Track Slide - Saddle Top & Spring Loaded Stop - 71mm(2-25/32") Length

Features:
  • Spring-loaded plunger pins for fast positive positioning
  • Chrome-plated brass slides


Applications
  • Dinghy and small catamaran jib sheet leads
  • Adjustable hiking strap systems


Specifications:
Length: 71mm(2-25/32")
M.W.L. 225kg(500lbs)
B.L. 450kg(990lbs)
Weight:70g(2.5oz)
Out of Stock
$27.95
55023XL.jpg
Ronstan - Ronstan Series 19 C-Track Slide - w/Swiveling Dead Eye - Cam Cleat - Spring-Loaded Track Stop (55023)
Series 19 C-Track Slide - w/Swiveling Dead Eye - Cam Cleat - Spring-Loaded Track Stop

Features:
  • Spring-loaded plunger pins for fast, positive positioning
  • Swivelling cleat fairleads to suit different crew positions


Applications:
  • Dinghy and small catamaran jib sheet leads
  • Adjustable hiking strap systems


Materials:
Chrome plated brass slides

Specifications:
Length: 65mm(2-9/16")
Weight: 185g(6.5oz)
$75.95
55026XL.jpg
Ronstan - Ronstan Race Sheave - Acetal Brass Bearing - 73mm (2-7/8") OD (55026)
Race Sheave - Acetal Brass Bearing - 73mm(2-7/8") OD

Precision moulded Acetal sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction.

Acetal Sheaves:
  • Choice of bearings
  • Brass bearing - for highest load applications
  • U.V. resistant Acetal sheaves
$21.95
55031XL.jpg
Ronstan - Ronstan Series 60 AP Sheave - Acetal Solid Bearing - 60mm (2-3/8") OD (55031)

Series 60AP Rope Sheave - Acetal Solid Bearing - 60mm(2-3/8") OD

Ronstan’s range of Acetal sheaves is moulded from a specially modified ultra-violet resistant grade of material to provide a long service life in the tough marine environment. Acetal is well suited to the application, with characteristics of high strength and resistance to impact and wear. It also exhibits excellent low friction properties for bearing applications. .


Features:

  • High strength and durability, utilizing the self-lubricating properties of Acetal
  • U.V. resistant acetal sheaves
$7.95
55049XL.jpg
Ronstan - Ronstan Boom Hanger - 65mm (2-1/2") Internal Width (55049)
Boom Hanger - 65mm(2-1/2") Internal Width

80mm(3-1/8") long x 65mm(2-1/2") wide

Material Diameter: 6.4mm(1/4").
Fixing Holes Diameter: 2 x 6.6mm(1/4")

Applications:
Typically used on dinghies, catamarans and small keelboats
Materials:
Grade 316 stainless steel
$16.95
55050XL.jpg
Ronstan - Ronstan Boom Hanger - 80mm (3-1/8") Internal Width (55050)
Boom Hanger - 80mm(3-1/8") Internal Width

125mm(5") long x 80mm(3-1/8") wide

Material Diameter: 7.9mm(5/16").
Fixing Holes Diameter: 2 x 8.1mm(5/16")

Applications:
Typically used on dinghies, catamarans and small keelboats
Materials:
Grade 316 stainless steel
$21.95
55051XL.jpg
Ronstan - Ronstan Eye Becket - 5mm (3/16") Mounting Hole - Stainless Steel (55051)
Eye Becket - 5mm(3/16") Mounting Hole - Stainless Steel

Suits Series 14, 19 ball bearing traveller systems
Stainless steel
$5.36
55052XL.jpg
Ronstan - Ronstan Eye Becket - 6mm (1/4") Mounting Hole - Stainless Steel (55052)
Eye Becket - 6mm(1/4") Mounting Hole - Stainless Steel

Suits Series 22, 26 & 30 ball bearing traveller systems
Stainless steel
Out of Stock
$6.26
55053XL.jpg
Ronstan - Ronstan Narrow Saddle - 18mm (23/32") Clearance (55053)
Narrow Saddle - 18mm(23/32") Clearance

Grade 316 Stainless Steel
60.0mm(2-3/8") screw to screw length
$8.06
Per Page      1 - 50 of 272