Winches

Sort By:  
46604XL.jpg
Barton Marine - Barton Marine Snubbing Winch (46604)
Snubber winches

Neat, lightweight units which are ideal for use on larger dinghies and dayboats. Manufactured from glass fibre reinforced nylon with anodised aluminium ribs.
Out of Stock
$149.74
46605XL.jpg
Barton Marine - Barton Marine Single Speed 8:1 Sheet Winch (46605)

Composite Winches

Single Speed 8:1

A versatile alternative to conventional aluminium winches, the Barton range of composite winches offer significant cost and weight savings and are truly low maintenance. Virtually self-lubricating, friction-free and corrosion resistant, the ingenious use of advanced materials ensure consistent performance and reliability.

  • Suitable as primaries for yachts up to 10M (30') or as spinnaker/ halyard winches on larger craft
  • Red, blue and green colored top rings are included, giving you the ability to color-code winches to control lines, port or starboard, or just to match the color scheme of your boat
$151.68
46606XL.jpg
Barton Marine - Barton Marine Twin Speed 16:1 Sheet Winch (46606)

Composite Winches

Single Speed 16:1

A versatile alternative to conventional aluminium winches, the Barton range of composite winches offer significant cost and weight savings and are truly low maintenance. Virtually self-lubricating, friction-free and corrosion resistant, the ingenious use of advanced materials ensure consistent performance and reliability.

  • Suitable as primaries for yachts up to 10M (30') or as spinnaker/ halyard winches on larger craft
  • Red, blue and green colored top rings are included, giving you the ability to color-code winches to control lines, port or starboard, or just to match the color scheme of your boat
Out of Stock
$344.81
46607XL.jpg
Barton Marine - Barton Marine Twin Speed 23:1 Sheet Winch (46607)

Composite Winches

Single Speed 23:1

A versatile alternative to conventional aluminium winches, the Barton range of composite winches offer significant cost and weight savings and are truly low maintenance. Virtually self-lubricating, friction-free and corrosion resistant, the ingenious use of advanced materials ensure consistent performance and reliability.

  • Suitable as primaries for yachts up to 10M (30') or as spinnaker/ halyard winches on larger craft
  • Red, blue and green colored top rings are included, giving you the ability to color-code winches to control lines, port or starboard, or just to match the color scheme of your boat
Out of Stock
$517.17
46608XL.jpg
Barton Marine - Barton Marine Aluminum Winch Handle - 8" (46608)
Aluminum Winch Handle - 8"

All designed to fit international star sockets and standard deck filler caps.

Light duty, inexpensive handles w/easy-grip roller handle and 'Spectro' grey anodised finish.

Important note:
These handles should not be used on large, two-speed winches as they are not designed for high loads in an anti-clockwise direction. SWL 40kg (88.18lbs)
$49.24
46610XL.jpg
Barton Marine - Barton Marine Aluminum Winch Handle - 10" (46610)
Aluminum Winch Handle - 10"

All designed to fit international star sockets and standard deck filler caps.

Light duty, inexpensive handles w/easy-grip roller handle and 'Spectro' grey anodised finish.

Important note:
These handles should not be used on large, two-speed winches as they are not designed for high loads in an anti-clockwise direction. SWL 40kg (88.18lbs)
$68.72
46612XL.jpg
Barton Marine - Barton Marine Floating Locking Winch Handle - 10" (46612)
Floating Handle - 10" Locking

Featuring a moulded body with an integral moulded handle shaft.
Locking mechanism is with a positive, easy action thumb switch. Handle floats in salt and freshwater.

Important note:
Floating winch handles have a SWL of 40kg (88.18lbs) and are intended for lightweight use only.
Out of Stock
$97.73
46613XL.jpg
Barton Marine - Barton Marine Floating Locking Winch Handle - 8" (46613)
Floating Handle - 8" Locking

Featuring a moulded body with an integral moulded handle shaft.
Locking mechanism is with a positive, easy action thumb switch. Handle floats in salt and freshwater.

Important note:
Floating winch handles have a SWL of 40kg (88.18lbs) and are intended for lightweight use only.
$88.07
46614XL.jpg
Barton Marine - Barton Marine Small Wincher (Pair) (46614)
The Barton 'Wincher'
(Pair)

Max Drum Ø 64-70mm (2.52"-2.76")
Max Rope Ø 8-10mm (0.31"-0.39")
Weight 202g (7.13oz)

A specially designed rubber moulding which fits over the top of standard winches, converting them to self-tailing.

This simple operation works when the line is sheeted under load, which means the coils climb up the winch drum and then become gripped by the underside of the Wincher's rubber body.

Cleating is achieved by locking the sheet into the Wincher's ribbed central groove.

Barton 'Winchers' are easy to fit and available in four sizes to suit a wide range of popular winches.
$62.05
46615XL.jpg
Barton Marine - Barton Marine Medium Wincher (Pair) (46615)
The Barton 'Wincher'
(Pair)

Max Drum Ø 70-80mm (2.76"-3.15")
Max Rope Ø 10-14mm (0.39"-0.55")
Weight 223g (7.87oz)

A specially designed rubber moulding which fits over the top of standard winches, converting them to self-tailing.

This simple operation works when the line is sheeted under load, which means the coils climb up the winch drum and then become gripped by the underside of the Wincher's rubber body.

Cleating is achieved by locking the sheet into the Wincher's ribbed central groove.

Barton 'Winchers' are easy to fit and available in four sizes to suit a wide range of popular winches.
$65.35
46616XL.jpg
Barton Marine - Barton Marine Large Wincher (Pair) (46616)
The Barton 'Wincher'
(Pair)

Max Drum Ø 80-90mm (3.15"-3.54")
Max Rope Ø 12-14mm (0.47"-0.55")
Weight 278g (9.81oz)

A specially designed rubber moulding which fits over the top of standard winches, converting them to self-tailing.

This simple operation works when the line is sheeted under load, which means the coils climb up the winch drum and then become gripped by the underside of the Wincher's rubber body.

Cleating is achieved by locking the sheet into the Wincher's ribbed central groove.

Barton 'Winchers' are easy to fit and available in four sizes to suit a wide range of popular winches.
$66.71
46617XL.jpg
Barton Marine - Barton Marine Extra Large Wincher (Pair) (46617)
The Barton 'Wincher'
(Pair)

Max Drum Ø 90-100mm (3.54"-3.94")
Max Rope Ø 12-16mm (0.47"-0.63")
Weight 387g (13.65oz)

A specially designed rubber moulding which fits over the top of standard winches, converting them to self-tailing.

This simple operation works when the line is sheeted under load, which means the coils climb up the winch drum and then become gripped by the underside of the Wincher's rubber body.

Cleating is achieved by locking the sheet into the Wincher's ribbed central groove.

Barton 'Winchers' are easy to fit and available in four sizes to suit a wide range of popular winches.
$79.85
55003XL.jpg
ANDERSEN - ANDERSEN 28 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel (55003)

28 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel


If you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.

From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully polished grade 316 stainless steel. The dramatic result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say, “Full Stainless – Beyond Good Looks.”

As with all ANDERSEN Winches™, our Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes.

Materials

Andersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacture to further increase strength and hardness as it takes its final form. The resulting construction is lightweight, yet stiff and unyielding. 

Drive shafts are in grade 329 duplex stainless steel. Pawls are cut from a cold pressed profile in grade 316 stainless steel and are virtually unbreakable. 

The upper center stems are manufactured from aluminum bronze for ultimate durability. The combination of materials and design contribute to a lightweight, rigid final assembly that enhances. the mechanical efficiency of the winch. Andersen winces are of similar weight to winches with aluminum drums, but are far more durable. 

Power Rib™

ANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.

Power Ratio

Power Ratio is the mechanical advantage of the winch and is calculated as follows:

length of handle x gear ratio

        radius of drum

The pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg).

This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.

Features

Anderson winch drums incorporate the distinctive Power Rib which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimizes vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip. 

Stainless steel roller bearings and ball bearings carry the highest drum loads to the center stem of the winch, minimizing efficiency losses due to friction. 

The self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self-tailing jaws adjust automatically to suit various rope sizes. 

Andersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so, under normal use. 



Specifications:

Drum Ø:70mm(2-3/4")

Base Ø:125mm(4-15/16")

Height:151mm(5-15/16")

Line Entry:65mm(2-9/16")

Line Size:8-14mm(1/8 - 11/16")

Weight;3.9kg(8.6lbs)

Gear ratio 1st speed1.3 : 1

Gear ratio 2nd speed:4.0 : 1

Power ratio 1st speed:9.5 : 1

Power ratio 2nd speed:28.6 : 1


$773.92
55004XL.jpg
ANDERSEN - ANDERSEN 34 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel (55004)

34 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel


If you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.

From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully polished grade 316 stainless steel. The dramatic result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say, “Full Stainless – Beyond Good Looks.”

As with all ANDERSEN Winches™, our Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes.

Materials

Andersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacture to further increase strength and hardness as it takes its final form. The resulting construction is lightweight, yet stiff and unyielding. 

Drive shafts are in grade 329 duplex stainless steel. Pawls are cut from a cold pressed profile in grade 316 stainless steel and are virtually unbreakable. 

The upper center stems are manufactured from aluminum bronze for ultimate durability. The combination of materials and design contribute to a lightweight, rigid final assembly that enhances. the mechanical efficiency of the winch. Andersen winces are of similar weight to winches with aluminum drums, but are far more durable. 

Power Rib™

ANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.

Power Ratio

Power Ratio is the mechanical advantage of the winch and is calculated as follows:

length of handle x gear ratio

        radius of drum

The pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg).

This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.

Features

Anderson winch drums incorporate the distinctive Power Rib which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimizes vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip. 

Stainless steel roller bearings and ball bearings carry the highest drum loads to the center stem of the winch, minimizing efficiency losses due to friction. 

The self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self-tailing jaws adjust automatically to suit various rope sizes. 

Andersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so, under normal use. 



Specifications:

Drum Ø:70mm(2-3/4")

Base Ø:125mm(4-15/16")

Height:151mm(5-15/16")

Line Entry:65mm(2-9/16")

Line Size:8-14mm(1/8 - 11/16")

Weight;4.1kg(9.0lbs)

Gear ratio 1st speed1.3 : 1

Gear ratio 2nd speed:4.7 : 1

Power ratio 1st speed:9.5 : 1

Power ratio 2nd speed:33.8 : 1


$870.77
55005XL.jpg
ANDERSEN - ANDERSEN 40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel (55005)

40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel

If you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.

From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully polished grade 316 stainless steel. The dramatic result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say, “Full Stainless – Beyond Good Looks.”

As with all ANDERSEN Winches™, our Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes.

Materials

Andersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacture to further increase strength and hardness as it takes its final form. The resulting construction is lightweight, yet stiff and unyielding. 

Drive shafts are in grade 329 duplex stainless steel. Pawls are cut from a cold pressed profile in grade 316 stainless steel and are virtually unbreakable. 

The upper center stems are manufactured from aluminum bronze for ultimate durability. The combination of materials and design contribute to a lightweight, rigid final assembly that enhances. the mechanical efficiency of the winch. Andersen winces are of similar weight to winches with aluminum drums, but are far more durable. 

Power Rib™

ANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.

Power Ratio

Power Ratio is the mechanical advantage of the winch and is calculated as follows:

length of handle x gear ratio

        radius of drum

The pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg).

This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.

Features

Anderson winch drums incorporate the distinctive Power Rib which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimizes vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip. 

Stainless steel roller bearings and ball bearings carry the highest drum loads to the center stem of the winch, minimizing efficiency losses due to friction. 

The self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self-tailing jaws adjust automatically to suit various rope sizes. 

Andersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so, under normal use. 

Specifications:

Drum Ø:75mm(2-15/16")

Base Ø:152mm(6")

Height:174mm(6-7/8")

Line Entry:71mm(2-13/16")

Line Size:8-14mm(1/8 - 11/16")

Weight;4.9kg(10.8lbs)

Gear ratio 1st speed1.3 : 1

Gear ratio 2nd speed:6.0 : 1

Power ratio 1st speed:8.9 : 1

Power ratio 2nd speed:40.0 : 1

$957.95
55006XL.jpg
ANDERSEN - ANDERSEN 46 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel (55006)

40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel

If you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.

From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully polished grade 316 stainless steel. The dramatic result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say, “Full Stainless – Beyond Good Looks.”

As with all ANDERSEN Winches™, our Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes.

Materials

Andersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacture to further increase strength and hardness as it takes its final form. The resulting construction is lightweight, yet stiff and unyielding. 

Drive shafts are in grade 329 duplex stainless steel. Pawls are cut from a cold pressed profile in grade 316 stainless steel and are virtually unbreakable. 

The upper center stems are manufactured from aluminum bronze for ultimate durability. The combination of materials and design contribute to a lightweight, rigid final assembly that enhances. the mechanical efficiency of the winch. Andersen winces are of similar weight to winches with aluminum drums, but are far more durable. 

Power Rib™

ANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.

Power Ratio

Power Ratio is the mechanical advantage of the winch and is calculated as follows:

length of handle x gear ratio

        radius of drum

The pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg).

This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.

Features

Anderson winch drums incorporate the distinctive Power Rib which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimizes vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip. 

Stainless steel roller bearings and ball bearings carry the highest drum loads to the center stem of the winch, minimizing efficiency losses due to friction. 

The self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self-tailing jaws adjust automatically to suit various rope sizes. 

Andersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so, under normal use. 

Specifications:

Drum Ø:75mm(3-1/2")

Base Ø:152mm(7-1/16")

Height:174mm(8-1/4")

Line Entry:71mm(3-9/16")

Line Size:8-14mm(1/8 - 11/16")

Weight;4.9kg(17.2lbs)

Gear ratio 1st speed2.8 : 1

Gear ratio 2nd speed:8.4 : 1

Power ratio 1st speed:15.7 : 1

Power ratio 2nd speed:47.1 : 1

$1,351.21
55195XL.jpg
Ronstan - Ronstan Winch Handle Pocket - Single - White PVC (55195)
Winch Handle Pocket - Single - White PVC

Features:
  • Easy to mount - no drilling holes
  • Hook & loop fixing, with sticky back
  • Mesh bottom for drainage & ventilation
  • Durable, water repellent and U.V. resistant acrylic

WarningWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Out of Stock
$40.14
55213XL.jpg
Ronstan - Ronstan Quick-Lock Winch Handle - Single Grip - 200mm (8") Length (55213)
Quick-Lock Winch Handle - Single Grip - 200mm(8") Length

Power, Performance & Intuitive Operation
The Ronstan Quick-Lock™ is the quickest and most user friendly winch handle available for racing and cruising sailors alike. In addition to its super fast grab-and-release mechanism for fool-proof single handed removal, it is the only handle to feature an auto Quick-Lock mechanism that allows you to place the drive head straight into the winch socket without the need to depress or rotate a knob - it couldn't be easier!

Quick-Lock™ Automatic Insertion
Ronstan Quick-Lock™ allows you to immediately place the drive head into the winch socket, without the need to rotate a knob or depress a button. Its stainless steel locking lever then retains the handle securely in place until you are ready to remove it.

Intuitive Grab & Release
The large easy to locate release button extends up the length of the handle providing fool-proof grab-and-release operation. This makes the Quick-Lock™ ideal for operation at full extension and with only one hand. Its intuitive nature makes it ideal for use by inexperienced and experienced crew alike.

Power in Your Hands
A precision ball bearing race in the hand grip provides free rotation for high speed or high power cranking alike and the refined ergonomics ensure efficient transfer of effort. 8" models cater to situations with restricted space and 10" handles provide greater mechanical advantage - the basis on which winch power ratios are calculated.

Features:
  • Auto lock-in latch
  • Large grab-and-release button
  • Single handed insert and release operation
  • Ball bearing hand grips
  • Lightweight forged construction
  • Corrosion resistant Hardcoat anodised finish


Applications:
  • Manual winching applications on racing and cruising yachts 25M (82')
$138.41
55214XL.jpg
Ronstan - Ronstan Quick-Lock Winch Handle - Single Grip - 250mm (10") Length (55214)
Quick-Lock Winch Handle - Single Grip - 250mm(10") Length

Power, Performance & Intuitive Operation
The Ronstan Quick-Lock™ is the quickest and most user friendly winch handle available for racing and cruising sailors alike. In addition to its super fast grab-and-release mechanism for fool-proof single handed removal, it is the only handle to feature an auto Quick-Lock mechanism that allows you to place the drive head straight into the winch socket without the need to depress or rotate a knob - it couldn't be easier!

Quick-Lock™ Automatic Insertion
Ronstan Quick-Lock™ allows you to immediately place the drive head into the winch socket, without the need to rotate a knob or depress a button. Its stainless steel locking lever then retains the handle securely in place until you are ready to remove it.

Intuitive Grab & Release
The large easy to locate release button extends up the length of the handle providing fool-proof grab-and-release operation. This makes the Quick-Lock™ ideal for operation at full extension and with only one hand. Its intuitive nature makes it ideal for use by inexperienced and experienced crew alike.

Power in Your Hands
A precision ball bearing race in the hand grip provides free rotation for high speed or high power cranking alike and the refined ergonomics ensure efficient transfer of effort. 8" models cater to situations with restricted space and 10" handles provide greater mechanical advantage - the basis on which winch power ratios are calculated.

Features:
  • Auto lock-in latch
  • Large grab-and-release button
  • Single handed insert and release operation
  • Ball bearing hand grips
  • Lightweight forged construction
  • Corrosion resistant Hardcoat anodised finish


Applications:
  • Manual winching applications on racing and cruising yachts 25M (82')
$157.29
55215XL.jpg
Ronstan - Ronstan Quick-Lock Winch Handle - Palm Grip - 200mm (8") Length (55215)
Quick-Lock Winch Handle - Palm Grip - 200mm(8") Length

Power, Performance & Intuitive Operation
The Ronstan Quick-Lock™ is the quickest and most user friendly winch handle available for racing and cruising sailors alike. In addition to its super fast grab-and-release mechanism for fool-proof single handed removal, it is the only handle to feature an auto Quick-Lock mechanism that allows you to place the drive head straight into the winch socket without the need to depress or rotate a knob - it couldn't be easier!

Quick-Lock™ Automatic Insertion
Ronstan Quick-Lock™ allows you to immediately place the drive head into the winch socket, without the need to rotate a knob or depress a button. Its stainless steel locking lever then retains the handle securely in place until you are ready to remove it.

Intuitive Grab & Release
The large easy to locate release button extends up the length of the handle providing fool-proof grab-and-release operation. This makes the Quick-Lock™ ideal for operation at full extension and with only one hand. Its intuitive nature makes it ideal for use by inexperienced and experienced crew alike.

Power in Your Hands
A precision ball bearing race in the hand grip provides free rotation for high speed or high power cranking alike and the refined ergonomics ensure efficient transfer of effort. 8" models cater to situations with restricted space and 10" handles provide greater mechanical advantage - the basis on which winch power ratios are calculated. Palm grip handles are the ultimate option where serious two-handed cranking is required.

Features:
  • Auto lock-in latch
  • Large grab-and-release button
  • Single handed insert and release operation
  • Ball bearing hand grips
  • Lightweight forged construction
  • Corrosion resistant Hardcoat anodised finish


Applications:
  • Manual winching applications on racing and cruising yachts 25M (82')

$157.29
55216XL.jpg
Ronstan - Ronstan Quick-Lock Winch Handle - Palm Grip - 250mm (10") Length (55216)
Quick-Lock Winch Handle - Palm Grip - 250mm(10") Length

Power, Performance & Intuitive Operation
The Ronstan Quick-Lock™ is the quickest and most user friendly winch handle available for racing and cruising sailors alike. In addition to its super fast grab-and-release mechanism for fool-proof single handed removal, it is the only handle to feature an auto Quick-Lock mechanism that allows you to place the drive head straight into the winch socket without the need to depress or rotate a knob - it couldn't be easier!

Quick-Lock™ Automatic Insertion
Ronstan Quick-Lock™ allows you to immediately place the drive head into the winch socket, without the need to rotate a knob or depress a button. Its stainless steel locking lever then retains the handle securely in place until you are ready to remove it.

Intuitive Grab & Release
The large easy to locate release button extends up the length of the handle providing fool-proof grab-and-release operation. This makes the Quick-Lock™ ideal for operation at full extension and with only one hand. Its intuitive nature makes it ideal for use by inexperienced and experienced crew alike.

Power in Your Hands
A precision ball bearing race in the hand grip provides free rotation for high speed or high power cranking alike and the refined ergonomics ensure efficient transfer of effort. 8" models cater to situations with restricted space and 10" handles provide greater mechanical advantage - the basis on which winch power ratios are calculated. Palm grip handles are the ultimate option where serious two-handed cranking is required.

Features:
  • Auto lock-in latch
  • Large grab-and-release button
  • Single handed insert and release operation
  • Ball bearing hand grips
  • Lightweight forged construction
  • Corrosion resistant Hardcoat anodised finish


Applications:
  • Manual winching applications on racing and cruising yachts 25M (82')

$163.58
56277XL.jpg
Barton Marine - Barton Marine Winch Handle Pocket (56277)
Winch Handle Pocket

The pocket is manufactured in the UK from flexible dip moulded PVC to enable a wide range of handle types to be stored quickly and securely.

The pocket measures size 320mm x 90mm x 50mm and requires four fixing screws to attach (not supplied).
$14.41
72651XL.jpg
ANDERSEN - ANDERSEN 28 ST BT - 2-Speed Self-Tailing Manual Winch - Black Trim (72651)

28 ST BT - 2-Speed Self-Tailing Manual Winch - Black Trim

The choice for uncompromised ANDERSEN performance in a manual winch, our Black Trim Self-Tailing Winch is perfect for the sailor seeking convenience and reliability. It incorporates our exclusive self-tailing mechanism that automatically accommodates a wide range of different sheet and halyard sizes allowing each winch to serve numerous onboard purposes. From raising sails to trimming sheets, these winches provide the reliable power you need for smooth sailing.

As with all ANDERSEN Winches™, our Black Trim Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This unique drum design uses vertical ribs to firmly grip the line, requiring fewer turns to achieve the same line-holding grip when compared with conventional winch drums. The smooth surface is also corrosion free and far less abrasive to your sheets and halyards to extended the life of your lines.

Specifications:

  • Drum Ø (mm): 70
  • Base Ø (mm): 125
  • Height (mm): 147
  • Line Entry (mm): 65
  • Line Size (mm): 8-14
  • Weight (kg): 3.8
  • Gear ratio 1st speed: 1.3 : 1
  • Gear ratio 2nd speed: 3.7 : 1
  • Power ratio 1st speed: 9.5 : 1
  • Power ratio 2nd speed: 28.6 : 1
Out of Stock
$773.92
72652XL.jpg
ANDERSEN - ANDERSEN 34 ST BT - 2-Speed Self-Tailing Manual Winch - Black Trim (72652)

34 ST BT - 2-Speed Self-Tailing Manual Winch - Black Trim

The choice for uncompromised ANDERSEN performance in a manual winch, our Black Trim Self-Tailing Winch is perfect for the sailor seeking convenience and reliability. It incorporates our exclusive self-tailing mechanism that automatically accommodates a wide range of different sheet and halyard sizes allowing each winch to serve numerous onboard purposes. From raising sails to trimming sheets, these winches provide the reliable power you need for smooth sailing.

As with all ANDERSEN Winches™, our Black Trim Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This unique drum design uses vertical ribs to firmly grip the line, requiring fewer turns to achieve the same line-holding grip when compared with conventional winch drums. The smooth surface is also corrosion free and far less abrasive to your sheets and halyards to extended the life of your lines.

Specifications:

  • Drum Ø (mm): 70
  • Base Ø (mm): 125
  • Height (mm): 147
  • Line Entry (mm): 65
  • Line Size (mm): 8-14
  • Weight (kg): 4.0
  • Gear ratio 1st speed: 1.3 : 1
  • Gear ratio 2nd speed: 4.7 : 1
  • Power ratio 1st speed: 9.5 : 1
  • Power ratio 2nd speed: 33.8 : 1
Out of Stock
$870.77
72653XL.jpg
ANDERSEN - ANDERSEN 40 ST BT - 2-Speed Self-Tailing Manual Winch - Black Trim (72653)

40 ST BT - 2-Speed Self-Tailing Manual Winch - Black Trim

The choice for uncompromised ANDERSEN performance in a manual winch, our Black Trim Self-Tailing Winch is perfect for the sailor seeking convenience and reliability. It incorporates our exclusive self-tailing mechanism that automatically accommodates a wide range of different sheet and halyard sizes allowing each winch to serve numerous onboard purposes. From raising sails to trimming sheets, these winches provide the reliable power you need for smooth sailing.

As with all ANDERSEN Winches™, our Black Trim Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This unique drum design uses vertical ribs to firmly grip the line, requiring fewer turns to achieve the same line-holding grip when compared with conventional winch drums. The smooth surface is also corrosion free and far less abrasive to your sheets and halyards to extended the life of your lines.

Specifications:

  • Drum Ø (mm): 75
  • Base Ø (mm): 152
  • Height (mm): 172
  • Line Entry (mm): 71
  • Line Size (mm): 8-14
  • Weight (kg): 4.8
  • Gear ratio 1st speed: 1.3 : 1
  • Gear ratio 2nd speed: 6.0 : 1
  • Power ratio 1st speed: 8.5 : 1
  • Power ratio 2nd speed: 39.5 : 1
Out of Stock
$957.95
72654XL.jpg
ANDERSEN - ANDERSEN 46 ST BT - 2-Speed Self-Tailing Manual Winch - Black Trim (72654)

46 ST BT - 2-Speed Self-Tailing Manual Winch - Black Trim

The choice for uncompromised ANDERSEN performance in a manual winch, our Black Trim Self-Tailing Winch is perfect for the sailor seeking convenience and reliability. It incorporates our exclusive self-tailing mechanism that automatically accommodates a wide range of different sheet and halyard sizes allowing each winch to serve numerous onboard purposes. From raising sails to trimming sheets, these winches provide the reliable power you need for smooth sailing.

As with all ANDERSEN Winches™, our Black Trim Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This unique drum design uses vertical ribs to firmly grip the line, requiring fewer turns to achieve the same line-holding grip when compared with conventional winch drums. The smooth surface is also corrosion free and far less abrasive to your sheets and halyards to extended the life of your lines.

Specifications:

  • Drum Ø (mm): 89
  • Base Ø (mm): 180
  • Height (mm): 202
  • Line Entry (mm): 90
  • Line Size (mm): 8-14
  • Weight (kg): 7.6
  • Gear ratio 1st speed: 2.8 : 1
  • Gear ratio 2nd speed: 8.4 : 1
  • Power ratio 1st speed: 15.5 : 1
  • Power ratio 2nd speed: 46.6 : 1
Out of Stock
$1,351.21
73331XL.jpg
ANDERSEN - ANDERSEN 12 ST FS Self-Tailing Manual Single Speed Winch - Full Stainless (73331)

12 ST FS Self-Tailing Manual Single Speed Winch - Full Stainless

Power Rib™

ANDERSEN Winches feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What’s more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.

Power Ratio

Power Ratio is the mechanical advantage of the winch and is calculated as follows:

length of handle x gear ratio 
          radius of drum

The pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows: pull of handle (kg x Power Ratio = pull of winch (kg).

This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.

Specifications:

  • Drum Ø D: 2-3/4"
  • Base Ø B: 4-1/2"
  • Height H: 5"
  • Line Entry L: 1-3/4"
  • Line Size: 5/16-9/16"
  • Weight: 5.7lb
  • Gear ratio 1st speed: 1.3 : 1
  • Power ratio 1st speed: 9.5 :1
$444.58
73332XL.jpg
ANDERSEN - ANDERSEN 18 ST FS Self-Tailing Manual Single Speed Winch - Full Stainless (73332)

18 ST FS Self-Tailing Manual Single Speed Winch - Full Stainless

Power Rib™

ANDERSEN Winches feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What’s more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.

Power Ratio

Power Ratio is the mechanical advantage of the winch and is calculated as follows:

length of handle x gear ratio 
          radius of drum

The pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows: pull of handle (kg x Power Ratio = pull of winch (kg).

This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.

Specifications:

  • Drum Ø D: 2-3/4"
  • Base Ø B: 4-3/4"
  • Height H: 5-1/4"
  • Line Entry L: 1-15/16"
  • Line Size: 1/8-11/16"
  • Weight: 7.0lb
  • Gear ratio 1st speed: 2.6 : 1
  • Power ratio 1st speed: 18.8 :1
$541.45
73333XL.jpg
ANDERSEN - ANDERSEN 50 ST FS Self-Tailing Manual 2-Speed Winch - Full Stainless (73333)

50 ST FS Self-Tailing Manual 2-Speed Winch - Full Stainless

Power Rib™

ANDERSEN Winches feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What’s more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.

Power Ratio

Power Ratio is the mechanical advantage of the winch and is calculated as follows:

length of handle x gear ratio 
          radius of drum

The pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows: pull of handle (kg x Power Ratio = pull of winch (kg).

This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.

Specifications:

  • Drum Ø D: 3-1/2"
  • Base Ø B: 7-1/16"
  • Height H: 7-15/16"
  • Line Entry L: 3-9/16"
  • Line Size: 5/16-9/16"
  • Weight: 17.2lb
  • Gear ratio 1st speed: 2.8 : 1
  • Gear ratio 2nd speed: 8.8 : 1
  • Power ratio 1st speed: 15.7 :1
  • Power ratio 2nd speed: 49.3 : 1
$1,544.93
76265XL.jpg
ANDERSEN - ANDERSEN E1 Single Speed Electric Motor Conversion Kit f/28ST Winch - 12V (76265)

E1 Single Speed Electric Motor Conversion Kit for 28ST Winch - 12V

The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range. 

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button. 

This conversion kit fits an Andersen 28ST winch

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$2,177.70
76266XL.jpg
ANDERSEN - ANDERSEN E1 Single Speed Electric Motor Conversion Kit f/28ST Winch - 24V (76266)

E1 Single Speed Electric Motor Conversion Kit for 28ST Winch - 24V

The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range. 

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button. 

This conversion kit fits an Andersen 28ST winch

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$2,177.70
76267XL.jpg
ANDERSEN - ANDERSEN E1 Single Speed Electric Motor Conversion Kit f/34ST Winch - 12V (76267)

E1 Single Speed Electric Motor Conversion Kit for 34ST Winch - 12V

The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range. 

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button. 

This conversion kit fits an Andersen 34ST winch

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$2,207.45
76268XL.jpg
ANDERSEN - ANDERSEN E1 Single Speed Electric Motor Conversion Kit f/34ST Winch - 24V (76268)

E1 Single Speed Electric Motor Conversion Kit for 34ST Winch - 24V

The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range. 

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button. 

This conversion kit fits an Andersen 34ST winch

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$2,207.45
76269XL.jpg
ANDERSEN - ANDERSEN E1 Single Speed Electric Motor Conversion Kit f/40ST Winch - 12V (76269)

E1 Single Speed Electric Motor Conversion Kit for 40ST Winch - 12V

The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range. 

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button. 

This conversion kit fits an Andersen 40ST winch

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$2,286.79
76270XL.jpg
ANDERSEN - ANDERSEN E1 Single Speed Electric Motor Conversion Kit f/40ST Winch - 24V (76270)

E1 Single Speed Electric Motor Conversion Kit for 40ST Winch - 24V

The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range. 

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button. 

This conversion kit fits an Andersen 40ST winch

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$2,286.79
76271XL.jpg
ANDERSEN - ANDERSEN E1 Single Speed Electric Motor Conversion Kit f/46ST Winch - 12V (76271)

E1 Single Speed Electric Motor Conversion Kit for 46ST Winch - 12V

The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range. 

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button. 

This conversion kit fits an Andersen 46ST winch

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. ** 

Out of Stock
$2,181.66
76272XL.jpg
ANDERSEN - ANDERSEN E1 Single Speed Electric Motor Conversion Kit f/46ST Winch - 24V (76272)

E1 Single Speed Electric Motor Conversion Kit for 46ST Winch - 24V

The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range. 

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button. 

This conversion kit fits an Andersen 46ST winch

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$2,181.66
76273XL.jpg
ANDERSEN - ANDERSEN E1 Single Speed Electric Motor Conversion Kit f/50ST Winch - 12V (76273)

E1 Single Speed Electric Motor Conversion Kit for 50ST Winch - 12V

The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range. 

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button. 

This conversion kit fits an Andersen 50ST winch

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$2,082.50
76274XL.jpg
ANDERSEN - ANDERSEN E1 Single Speed Electric Motor Conversion Kit f/50ST Winch - 24V (76274)

E1 Single Speed Electric Motor Conversion Kit for 50ST Winch - 24V

The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range. 

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button. 

This conversion kit fits an Andersen 50ST winch

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$2,082.50
76281XL.jpg
ANDERSEN - ANDERSEN Below Deck Variable Speed Compact Motor Electric Conversion Kit - 12V f/28ST Winch (76281)

Below Deck Variable Speed Compact Motor Electric Conversion Kit - 12V for 28ST Winch

The uncompromising ANDERSEN Variable-speed Compact Motor™ is especially developed for use as a winch motor. It is available in two versions; Below Deck, with smaller, built-in dimensions than a standard motor and Above Deck, featuring the winch mounted directly on the motor for deck or mast installation. This motor is highly efficient, with an impressive line speed and first-rate maximum load. The unit is extremely easy to install and demonstrates why ANDERSEN Products are in a class of their own.

The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear. This new approach to motors also provides other advantages; including 30-50% less power consumption compared to a conventional electric motor.

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, switches and cable terminals.

Important Information
Mounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor™ Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$3,799.21
76282XL.jpg
ANDERSEN - ANDERSEN Below Deck Variable Speed Compact Motor Electric Conversion Kit - 24V f/28ST Winch (76282)

Below Deck Variable Speed Compact Motor Electric Conversion Kit - 24V for 28ST Winch

The uncompromising ANDERSEN Variable-speed Compact Motor™ is especially developed for use as a winch motor. It is available in two versions; Below Deck, with smaller, built-in dimensions than a standard motor and Above Deck, featuring the winch mounted directly on the motor for deck or mast installation. This motor is highly efficient, with an impressive line speed and first-rate maximum load. The unit is extremely easy to install and demonstrates why ANDERSEN Products are in a class of their own.

The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear. This new approach to motors also provides other advantages; including 30-50% less power consumption compared to a conventional electric motor.

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, switches and cable terminals.

Important Information
Mounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor™ Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$4,161.04
76284XL.jpg
ANDERSEN - ANDERSEN Above Deck Variable Speed Compact Motor Electric Conversion Kit - 12V f/28ST Winch (76284)

Above Deck Variable Speed Compact Motor Electric Conversion Kit - 12V for 28ST Winch

The uncompromising ANDERSEN Variable-speed Compact Motor™ is especially developed for use as a winch motor. It is available in two versions; Below Deck, with smaller, built-in dimensions than a standard motor and Above Deck, featuring the winch mounted directly on the motor for deck or mast installation. This motor is highly efficient, with an impressive line speed and first-rate maximum load. The unit is extremely easy to install and demonstrates why ANDERSEN Products are in a class of their own.

The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear. This new approach to motors also provides other advantages; including 30-50% less power consumption compared to a conventional electric motor.

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, switches and cable terminals.

Important Information
Mounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor™ Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$4,161.04
76285XL.jpg
ANDERSEN - ANDERSEN Above Deck Variable Speed Compact Motor Electric Conversion Kit - 24V f/28ST Winch (76285)

Above Deck Variable Speed Compact Motor Electric Conversion Kit - 24V for 28ST Winch

The uncompromising ANDERSEN Variable-speed Compact Motor™ is especially developed for use as a winch motor. It is available in two versions; Below Deck, with smaller, built-in dimensions than a standard motor and Above Deck, featuring the winch mounted directly on the motor for deck or mast installation. This motor is highly efficient, with an impressive line speed and first-rate maximum load. The unit is extremely easy to install and demonstrates why ANDERSEN Products are in a class of their own.

The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear. This new approach to motors also provides other advantages; including 30-50% less power consumption compared to a conventional electric motor.

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, switches and cable terminals.

Important Information
Mounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor™ Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$4,161.04
76286XL.jpg
ANDERSEN - ANDERSEN Below Deck Variable Speed Compact Motor Electric Conversion Kit - 12V f/34ST Winch (76286)

Below Deck Variable Speed Compact Motor Electric Conversion Kit - 12V for 34ST Winch

The uncompromising ANDERSEN Variable-speed Compact Motor™ is especially developed for use as a winch motor. It is available in two versions; Below Deck, with smaller, built-in dimensions than a standard motor and Above Deck, featuring the winch mounted directly on the motor for deck or mast installation. This motor is highly efficient, with an impressive line speed and first-rate maximum load. The unit is extremely easy to install and demonstrates why ANDERSEN Products are in a class of their own.

The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear. This new approach to motors also provides other advantages; including 30-50% less power consumption compared to a conventional electric motor.

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, switches and cable terminals.

Important Information
Mounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor™ Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$3,844.47
76287XL.jpg
ANDERSEN - ANDERSEN Below Deck Variable Speed Compact Motor Electric Conversion Kit - 24V f/34ST Winch (76287)

Below Deck Variable Speed Compact Motor Electric Conversion Kit - 24V for 34ST Winch

The uncompromising ANDERSEN Variable-speed Compact Motor™ is especially developed for use as a winch motor. It is available in two versions; Below Deck, with smaller, built-in dimensions than a standard motor and Above Deck, featuring the winch mounted directly on the motor for deck or mast installation. This motor is highly efficient, with an impressive line speed and first-rate maximum load. The unit is extremely easy to install and demonstrates why ANDERSEN Products are in a class of their own.

The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear. This new approach to motors also provides other advantages; including 30-50% less power consumption compared to a conventional electric motor.

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, switches and cable terminals.

Important Information
Mounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor™ Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$4,210.61
76288XL.jpg
ANDERSEN - ANDERSEN Above Deck Variable Speed Compact Motor Electric Conversion Kit - 12V f/34ST Winch (76288)

Above Deck Variable Speed Compact Motor Electric Conversion Kit - 12V for 34ST Winch

The uncompromising ANDERSEN Variable-speed Compact Motor™ is especially developed for use as a winch motor. It is available in two versions; Below Deck, with smaller, built-in dimensions than a standard motor and Above Deck, featuring the winch mounted directly on the motor for deck or mast installation. This motor is highly efficient, with an impressive line speed and first-rate maximum load. The unit is extremely easy to install and demonstrates why ANDERSEN Products are in a class of their own.

The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear. This new approach to motors also provides other advantages; including 30-50% less power consumption compared to a conventional electric motor.

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, switches and cable terminals.

Important Information
Mounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor™ Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$4,210.61
76289XL.jpg
ANDERSEN - ANDERSEN Above Deck Variable Speed Compact Motor Electric Conversion Kit - 24V f/34ST Winch (76289)

Above Deck Variable Speed Compact Motor Electric Conversion Kit - 24V for 34ST Winch

The uncompromising ANDERSEN Variable-speed Compact Motor™ is especially developed for use as a winch motor. It is available in two versions; Below Deck, with smaller, built-in dimensions than a standard motor and Above Deck, featuring the winch mounted directly on the motor for deck or mast installation. This motor is highly efficient, with an impressive line speed and first-rate maximum load. The unit is extremely easy to install and demonstrates why ANDERSEN Products are in a class of their own.

The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear. This new approach to motors also provides other advantages; including 30-50% less power consumption compared to a conventional electric motor.

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, switches and cable terminals.

Important Information
Mounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor™ Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$4,210.61
76290XL.jpg
ANDERSEN - ANDERSEN Below Deck Variable Speed Compact Motor Electric Conversion Kit - 12V f/40ST Winch (76290)

Below Deck Variable Speed Compact Motor Electric Conversion Kit - 12V for 40ST Winch

The uncompromising ANDERSEN Variable-speed Compact Motor™ is especially developed for use as a winch motor. It is available in two versions; Below Deck, with smaller, built-in dimensions than a standard motor and Above Deck, featuring the winch mounted directly on the motor for deck or mast installation. This motor is highly efficient, with an impressive line speed and first-rate maximum load. The unit is extremely easy to install and demonstrates why ANDERSEN Products are in a class of their own.

The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear. This new approach to motors also provides other advantages; including 30-50% less power consumption compared to a conventional electric motor.

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, switches and cable terminals.

Important Information
Mounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor™ Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$3,898.80
76291XL.jpg
ANDERSEN - ANDERSEN Below Deck Variable Speed Compact Motor Electric Conversion Kit - 24V f/40ST Winch (76291)

Below Deck Variable Speed Compact Motor Electric Conversion Kit - 24V for 40ST Winch

The uncompromising ANDERSEN Variable-speed Compact Motor™ is especially developed for use as a winch motor. It is available in two versions; Below Deck, with smaller, built-in dimensions than a standard motor and Above Deck, featuring the winch mounted directly on the motor for deck or mast installation. This motor is highly efficient, with an impressive line speed and first-rate maximum load. The unit is extremely easy to install and demonstrates why ANDERSEN Products are in a class of their own.

The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear. This new approach to motors also provides other advantages; including 30-50% less power consumption compared to a conventional electric motor.

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, switches and cable terminals.

Important Information
Mounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor™ Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$4,270.11
76292XL.jpg
ANDERSEN - ANDERSEN Above Deck Variable Speed Compact Motor Electric Conversion Kit - 12V f/40ST Winch (76292)

Above Deck Variable Speed Compact Motor Electric Conversion Kit - 12V for 40ST Winch

The uncompromising ANDERSEN Variable-speed Compact Motor™ is especially developed for use as a winch motor. It is available in two versions; Below Deck, with smaller, built-in dimensions than a standard motor and Above Deck, featuring the winch mounted directly on the motor for deck or mast installation. This motor is highly efficient, with an impressive line speed and first-rate maximum load. The unit is extremely easy to install and demonstrates why ANDERSEN Products are in a class of their own.

The motor is built on an entirely new commutator principle using no carbon brushes, resulting in the virtual elimination of wear and tear. This new approach to motors also provides other advantages; including 30-50% less power consumption compared to a conventional electric motor.

Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, switches and cable terminals.

Important Information
Mounting of an Above Deck Compact Motor™ winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor™ Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrication of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.

** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **

Out of Stock
$4,270.11
Per Page      1 - 50 of 89