Washdown / Pressure Pumps , Marine Plumbing & Ventilation

Sort By:  
34521XL.jpg
Jabsco - Jabsco Wakeboard Ballast Puppy w/Reversing Switch - 12V (34521)
Ballast Pump

Today's Wakeboard and Ski tow boats need to be able to take on water ballast to modify their wake formation. A development of our tried and tested Puppy Pumps lets these specialist craft rapidly take on and dump ballast, while modern electronics guard against dry running damage to the impeller

The choice of motor boat builders for ski and wakeboard ballast systems.

  • Includes Run-Dry Protection Device
  • 9 GPM (34 LPM) flow rate
  • Approximately 80 pounds of water ballast per minute
  • Self-priming to 3'
  • Reversible pump both fills and empties ballast tanks
  • Reversing switch
  • Ignition protected

Ports
  • 1" (25mm) hose barb external
  • 1/2" NPT internal

WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$288.50
51405XL.jpg
Jabsco - Jabsco Ballast Pump (51405)
Ballast Pump

This Wake/Surf boat Ballast pump is the same one utilized by most major boat builders. The Jabsco pump comes standard with a green Run Dry Impeller. This pump has the standard electrical quick connector installed. Just connect your hoses, mount the pump into the boat, in its orginal position, plug the power leads together and your surfing and wakeboarding again.

Impeller # 6303-0007-P - Always Carry a Spare

  • Orignial OEM Ballast Pump Replacement
  • Run Dry Impeller - Green
  • Same electrical connection as Original OEM
  • Same mounting as the OEM unit, no need to drill more holes
  • The leader for Flexible Impeller Ballast Pumps

WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$242.25
75412XL.jpg
Jabsco - Jabsco Ballast King Bronze DC Pump w/o Switch - 15 GPM (75412)

Ballast King Bronze DC Pump without Switch - 15 GPM

Wakeboard and Ski Boat Ballast Pump

Features:

  • Flow rate: 15 US gallons/min (57 Litres/min)
  • Self-priming from dry up to 1.2m (4ft)
  • Adds approx 125lbs (56kgs) of ballast per minute
  • Reversible to both fill and empty tanks
  • Simple design means fewer wearing parts.
  • ISO 8846 MARINE (Ignition protection).

Applications:

The Ballast King is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 15 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty.

 Specifications:

  • Body Materials: Bronze
  • Impeller: Jabsco Neoprene compound
  • Seal: Lip Type
  • Port(s): 1/2" Internal Pipe Threads 1" External Hose Barb 
  • Voltage: 12 (Vdc)
  • Amp Draw: 19 (amp)
  • Fuse Size: 25 (amp)
  • Motor Type: Equipped with Run-Dry Protection Device (Patent Pending) Permanent Magnet Type Fully Enclosed Stainless Steel Shaft Ball Type Shaft Bearing Reversible 
  • Duty Cycle: 30 Minutes Max
  • Dimensions: 3 5/8 x 8 x 4 3/4 (inches)

WarningWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Out of Stock
$284.10
Per Page      1 - 3 of 3
  • 1