Transfer Pumps , Winterizing

Drill Pumps

Jabsco drill pumps provide a very versatile means of transferring fluid almost anywhere an electric drill with 1/4" to 3/8" chuck can be operated. They provide easy powered pumping almost anywhere a hand utility pump might be used.

• Pumps up to 3.5 gpm
  
• Self-priming to 3ft
  
• 1/4" diameter shaft
  
• Supplied with 3/4" garden hose thread port adapters

WARNING: This product can expose you to chemicals including COBALT METAL POWDER which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Porta Quick Oil Changer

The Porta-Quick Portable Oil Changer makes quick, clean and easy oil changes on-board any boat, because it uses the vessel's own power supply to operate the powerful oil reservoir mounted flexible impeller pump.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Engine Oil Drain Pump

Polished brass hand pump connects directly to engine oil dipstick tube on many popular marine engines such as OMC and Mercruiser

• Screws onto threaded male 3/4" garden hose (GHT) fitting on top of dipstick tube.
  
• Gives simple "one-hand" pumping
  
• Complete with 2ft of 1/2" ID drain hose

WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

17820 Oil Changer System


The Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engines' oil pans or transmissions' oil sumps. The manifold is factory fitted with three ball valves to serve three different oil reservoirs and may be fitted with two additional ball valves to drain up to five oil reservoirs. The system can be used to remove old oil from an engine or transmission then reversed, with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission. Each connection to an engine is controlled by a dedicated full flow ball valve. The system's cover provides an attractive appearance, fully shrouding the entire pump and manifold system. It also provides added protection against accidental draining of an engine's oil supply because the valve cover protects the factory supplied valves from being accidentally bumped open. Additionally, at the end of an oil change, the cover will not close unless the factory supplied valves are in the fully closed position.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Flat Tank Oil Changer System

The Jabsco Flat Tank Oil Changer System simplifies the engine oil changing process, ideal for changing engine oil in Boats, RV's, Lawn and Garden Equipment.
There is no need to worry about open containers causing spills when changing engine oils with the 3-1/2 Gallon (13LTR) compact self-contained unit fitted with a self-priming diaphragm pump with an easy pour spout for emptying.
The Flat Tank design allows for easy storage in deck boxes, boat storage lockers, or RV storage compartments. Easy to use, clean and efficient dipstick suction tube, battery clamp wire leads, an on-off pump switch.

Features:

• Stores easily
  
• Compact robust tank design
  
• Easy pour spout with screw on cap
  
• Easy to carry handle
  
• 3-1/2 gallon (13ltr) sealed container
  
• Self-priming, run dry pump

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Oil Change Pump w/3.5 Gallon Bucket - 12 VDC, 1.5 GPM

Incorporating SHURFLO's advanced motor technology that includes thermal overload protection, general utility pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, oil changing and liquid transfer. 1 Year Warranty.

Features:

• 12 VDC
  
• 8' [2.4 m] Cable w/ Battery Clips
  
• CE
  
• Hose kit
  
• 3.5 Gal [13L] Storage Container
  
• Uses: Oil changing, winterizing and liquid transfer

Drill Pump - 200 GPH

Incorporating SHURFLO's advanced motor technology that includes thermal overload protection, general utility pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, oil changing and liquid transfer. 1 Year Warranty.

Features:

• 1/4" [6mm] Drill Shaft
  
• Flexible BUNA Impeller
  
• 8' [2.4m] Prime
  
• Uses: Oil Change and Liquid Transfers/LI>

Gear Pump Oil Change Kit - 12V

12V gear pump with oil change kit. Particularly suitable for oil change or removal/change in of other viscous liquids in tight spaces.

Hose set 6mm and 8mm, hose connection, 1,8m wires, fuse and battery clamps included.

Self priming, can run dry, reversible flow direction and with pump body in PTFE. Port connections 13 mm (3/8″), 6A fuse, for continuous duty.

Features:

• Weight: 0.4 kg/0.75 lbs
• Dimensions: 140/5.5L x 90/3.5H x 80/3.15W mm/in 
• Reversible flow direction by changing polarity 
• CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

Gear Pump Oil Change Kit - 24V

24V gear pump with oil change kit. Particularly suitable for oil change or removal/change in of other viscous liquids in tight spaces.

Hose set 6mm and 8mm, hose connection, 1,8m wires, fuse and battery clamps included.

Self priming, can run dry, reversible flow direction and with pump body in PTFE. Port connections 13 mm (3/8″), 3A fuse, for continuous duty.

Features:

• Weight: 0.4 kg/.75 lbs
• Dimensions: 140/5.5L x 90/3.5H x 80/3.15W mm/in 
• Type: Reversible flow direction by changing polarity 
• Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

Oil Change Hose Kit

Hose kit 6mm and 8mm with hose connections. Suitable for FIP and Gear Pumps, oil change or any other pump in/out purpose.

Oil Change System - 3-Port - 12V

Features:

• Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models.
• Touch Pad Controlled
• Bronze Manifold System
• System Sizes from 3 Valves to 6 Valves .
• Resettable Overcurrent and Dry Run Protection.
• Cover Conceals Pump and Circuitry on G Series.
• Oil Pan Adaptors Available for all Common Marine engines

Oil Change System - 6-Port - 12V

Features:

• Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models.
• Touch Pad Controlled
• Bronze Manifold System
• System Sizes from 3 Valves to 6 Valves .
• Resettable Overcurrent and Dry Run Protection.
• Cover Conceals Pump and Circuitry on G Series.
• Oil Pan Adaptors Available for all Common Marine engines