Heaters/Dehumidifiers

Sort By:  
25642XL.jpg
Davis Instruments - Davis Air Dryer 500 (25642)
Air-Dryr™ Mildew Fighter

Say Goodbye to Mold, Mildew and Moisture

1459 Air-Dryr 500. Handles up to 500 cubic feet of living space. Draws only 0.6 amps, 70 watts. Rectangular unit measures 14 x 5 x 4.5" (36 x 13 x 11 cm). EU model handles up to 14 cubic meters of living space.

Air-Dryrª is an inexpensive and effective way to fight moisture problems, cold drafts, and corrosion. Designed to operate anywhere, 24 hours a day. Place Air-Dryr on the floor in any damp, enclosed space and plug into a 110/120 volt outlet. The damp air is heated to the point moisture is held in suspension (above dew point), then released through the top vents of the device. As warmed air rises, cooler damp air is drawn in, where it too is heated. Air-Dryr costs no more to operate than the burning of a light bulb. A thermal cutoff turns the unit off should air flow be impeded.

Key Features of all Air-Dryr Units:
  • Attractive, neutral beige housing made of polycarbonate for strength and durability
  • Slim and stable
  • Can be placed out of the way in confined spaces
  • Handle a high volume of air
  • Designed to be left on 24 hours a day
  • Safe to the touch
  • Low operating cost
  • Trouble free
  • no switch, fan, or thermostat; uses natural convection to circulate the air
  • Silent operation
  • Safe for marine use
  • no components which cause sparking
  • UL listed

Use at Home or Office
  • Basements
  • Closets
  • Under Desks
  • Storage Units
  • Tack Rooms
  • Pump Rooms
  • Gun Cabinets
  • Pianos
  • Use in RVs
  • Motor Homes
  • Trailers Cars Airplanes

Use in Boats
  • Cabins
  • Bilges
  • Engine Rooms
  • V-Berths

$44.18
25643XL.jpg
Davis Instruments - Davis Air Dryer 1000 (25643)
Air-Dryr™ Mildew Fighter

Say Goodbye to Mold, Mildew and Moisture

1458 Air-Dryr 1000. Handles up to 1000 cubic feet of living space. Draws only 1.1 amps,130 watts. Circular unit measures 13.5" in diameter (34 cm) and 4.25" high (11 cm). EU model handles up to 28 cubic meters of living space.

Air-Dryrª is an inexpensive and effective way to fight moisture problems, cold drafts, and corrosion. Designed to operate anywhere, 24 hours a day. Place Air-Dryr on the floor in any damp, enclosed space and plug into a 110/120 volt outlet. The damp air is heated to the point moisture is held in suspension (above dew point), then released through the top vents of the device. As warmed air rises, cooler damp air is drawn in, where it too is heated. Air-Dryr costs no more to operate than the burning of a light bulb. A thermal cutoff turns the unit off should air flow be impeded.

Key Features of all Air-Dryr Units:
  • Attractive, neutral beige housing made of polycarbonate for strength and durability
  • Slim and stable
  • Can be placed out of the way in confined spaces
  • Handle a high volume of air
  • Designed to be left on 24 hours a day
  • Safe to the touch
  • Low operating cost
  • Trouble free
  • no switch, fan, or thermostat; uses natural convection to circulate the air
  • Silent operation
  • Safe for marine use
  • no components which cause sparking
  • UL listed

Use at Home or Office
  • Basements
  • Closets
  • Under Desks
  • Storage Units
  • Tack Rooms
  • Pump Rooms
  • Gun Cabinets
  • Pianos
  • Use in RVs
  • Motor Homes
  • Trailers Cars Airplanes

Use in Boats
  • Cabins
  • Bilges
  • Engine Rooms
  • V-Berths
$47.59
32789XL.jpg
Xtreme Heaters - Xtreme Heaters 300W Engine Compartment Heater (32789)
XTREME Heater 300
Bilge heaters built with new technology makes Xtreme the smart choice for the serious boater.

BTU: 1023 - 1790
Cubic Ft: 180
Wattage: 300-525+
Exit Air Temp: 167

The core of the Xtreme Heater is a heating element that is self-regulated at a preset temperature and automatically varies its wattage in order to maintain that preset temperature. What this means is that the heater will increase power and heat as it get colder to maintain the same temperature. The adaptability to outside temperatures also means less power consumed over the heating period. the Xtreme Heater is engineered to be fail safe and reliable with no sparks so that it is safe for marine use. All components were engineered specifically for the Xtreme Heater to keep your boat safe and in optimal condition.

Features:
  • True Forced air heaters for more accurate climate control (circulating warm air through engine compartment efficiently and consistently)
  • Automatic thermostat turns heater on at 40°F and off at 55°F +/- 3°
  • Safe through temperature limiting characteristics (Heater will not overheat)
  • Dynamic, self regulating, and therefore energy efficient and economical to use
  • High power to size ratio (built to fit in the smallest package size possible to deliver the most effective heat ever in a bilge heater)
  • Pre-wired (for ease of installation by consumer or professional) for 115v power source
  • Long lifetime / reliable (built to last a lifetime with the best parts available)
  • Built to meet or exceed ABYC ignition protection standards with UL, SA, CE and VDE recognized components (This is the safest possible way today)
  • Fully anodized inside and out for superior protection from the harsh marine environment
  • Fully 1 year warranty and lifetime support for service
  • Recommended operating temperature is from 15°F to 180°F
  • 20 foot power cord with a 3 prong plug easily reaches from heater mounting point to circuit protected outlet inside cabin
$315.00
32790XL.jpg
Xtreme Heaters - Xtreme Heaters 450W Engine Compartment Heater (32790)
XTREME Heater 450
Bilge heaters built with new technology makes Xtreme the smart choice for the serious boater.

BTU: 1535-2130
Cubic Ft: 350
Wattage: 450-625+
Exit Air Temp: 203

The core of the Xtreme Heater is a heating element that is self-regulated at a preset temperature and automatically varies its wattage in order to maintain that preset temperature. What this means is that the heater will increase power and heat as it get colder to maintain the same temperature. The adaptability to outside temperatures also means less power consumed over the heating period. the Xtreme Heater is engineered to be fail safe and reliable with no sparks so that it is safe for marine use. All components were engineered specifically for the Xtreme Heater to keep your boat safe and in optimal condition.

Features:
  • True Forced air heaters for more accurate climate control (circulating warm air through engine compartment efficiently and consistently)
  • Automatic thermostat turns heater on at 40°F and off at 55°F +/- 3°
  • Safe through temperature limiting characteristics (Heater will not overheat)
  • Dynamic, self regulating, and therefore energy efficient and economical to use
  • High power to size ratio (built to fit in the smallest package size possible to deliver the most effective heat ever in a bilge heater)
  • Pre-wired (for ease of installation by consumer or professional) for 115v power source
  • Long lifetime / reliable (built to last a lifetime with the best parts available)
  • Built to meet or exceed ABYC ignition protection standards with UL, SA, CE and VDE recognized components (This is the safest possible way today)
  • Fully anodized inside and out for superior protection from the harsh marine environment
  • Fully 1 year warranty and lifetime support for service
  • Recommended operating temperature is from 15°F to 180°F
  • 20 foot power cord with a 3 prong plug easily reaches from heater mounting point to circuit protected outlet inside cabin
$360.00
32791XL.jpg
Xtreme Heaters - Xtreme Heater 600W Engine Compartment Heater (32791)
XTREME Heater 600
Bilge heaters built with new technology makes Xtreme the smart choice for the serious boater.

BTU: 2050 to 2725
Cubic Ft: 675
Wattage: 600-800+
Exit Air Temp: 245

The core of the Xtreme Heater is a heating element that is self-regulated at a preset temperature and automatically varies its wattage in order to maintain that preset temperature. What this means is that the heater will increase power and heat as it get colder to maintain the same temperature. The adaptability to outside temperatures also means less power consumed over the heating period. the XtremeHeater is engineered to be fail safe and reliable with no sparks so that it is safe for marine use. All components were engineered specifically for the Xtreme Heater to keep your boat safe and in optimal condition.

Features:
  • True Forced air heaters for more accurate climate control (circulating warm air through engine compartment efficiently and consistently)
  • Automatic thermostat turns heater on at 40°F and off at 55°F +/- 3°
  • Safe through temperature limiting characteristics (Heater will not overheat)
  • Dynamic, self regulating, and therefore energy efficient and economical to use
  • High power to size ratio (built to fit in the smallest package size possible to deliver the most effective heat ever in a bilge heater)
  • Pre-wired (for ease of installation by consumer or professional) for 115v power source
  • Long lifetime / reliable (built to last a lifetime with the best parts available)
  • Built to meet or exceed ABYC ignition protection standards with UL, SA, CE and VDE recognized components (This is the safest possible way today)
  • Fully anodized inside and out for superior protection from the harsh marine environment
  • Fully 1 year warranty and lifetime support for service
  • Recommended operating temperature is from 15°F to 180°F
  • 20 foot power cord with a 3 prong plug easily reaches from heater mounting point to circuit protected outlet inside cabin
$405.00
34229XL.jpg
Xtreme Heaters - Xtreme Heaters Quick Release Mount f/300W Heater (34229)
Quick Release Bracket

Install and Remove your Xtreme Heater FAST!

Driven by customer demand, our quick release bracket was designed specifically for your Xtreme heater, and allows you to easily install and remove your heater(s) in seconds, without the need for tools.

Using this bracket, your mounting options open up to include locations you may not have considered due to concern for blocked access to other components in your tight engine space.

For our customers that prefer to leave their heater(s) in place only during the winter months, THIS is the accessory you've been asking for. The quick release bracket makes it simple to remove the heater for the boating season, leaving just the low-profile bracket installed and ready to go. When winter returns, just lock it down, and plug it in!

Features:
  • Built Xtreme Tough, anodized aluminum construction will not corrode
  • Provides easy off-season storage, for quick access to engine spaces
  • Works on ALL Xtreme Heaters built after 2004
  • Quickly Install and Remove your Heater Without Tools!
  • One Year Warranty
$30.98
34230XL.jpg
Xtreme Heaters - Xtreme Heaters Quick Release Mount f/XX & XXX Heaters (34230)
Quick Release Bracket

Install and Remove your Xtreme Heater FAST!

Driven by customer demand, our quick release bracket was designed specifically for your Xtreme heater, and allows you to easily install and remove your heater(s) in seconds, without the need for tools.

Using this bracket, your mounting options open up to include locations you may not have considered due to concern for blocked access to other components in your tight engine space.

For our customers that prefer to leave their heater(s) in place only during the winter months, THIS is the accessory you've been asking for. The quick release bracket makes it simple to remove the heater for the boating season, leaving just the low-profile bracket installed and ready to go. When winter returns, just lock it down, and plug it in!

Features:
  • Built Xtreme Tough, anodized aluminum construction will not corrode
  • Provides easy off-season storage, for quick access to engine spaces
  • Works on ALL Xtreme Heaters built after 2004
  • Quickly Install and Remove your Heater Without Tools!
  • One Year Warranty
$32.61
54321XL.jpg
Caframo - Caframo Pali 9510 400W 120VAC Engine Compartment Heater (54321)

Pali 9510 400W 120VAC Engine Compartment Heater


Protects your engine from freezing in engine compartments up to 80ft3 by utilizing an internal sealed thermostat to turn the heater on at 41°F (5°C).


Extend the boating season and protect your engine against surprise cold snaps prior to winterization. The Pali utilizes a self-regulating PTC heating element that cannot overheat. It meets all ignition protection guidelines and standards to allow it to be safely used in the marine engine compartment.


It is the only heater of its type fully safety compliant to UL and CSA standards.


The Pali utilizes an internal hermetically sealed thermostat to turn the heater on at 46°F (7°C) and off at 65°F (18°C). Pali is designed to heat engine compartments up to 220 cubic feet and it continuously protects engine compartments up to 80 cubic feet at -4°F (-20°C) outside ambient temperature. 


Features:

  • Ignition Protected Design
  • Safe Self-Regulated PTC Heaters
  • Impinged Air Technology
  • Dual Airflow Redundancy
  • Omnidirectional Airflow Discharge
  • Safe Hermetically Sealed Thermostat
  • Quick Release Mounting Bracket (included)
  • 20ft power cord


Benefits:

  • Safe; thermostat activates when engine compartment temperature drops to 46°F (7°C)
  • Heater will not overheat
  • Reduces corrosion
  • Compact design fits most engine compartments
  • A more reliable engine compartment heater
  • More uniform engine heating
  • Air flows in all directions to more evenly distribute warmth


$219.99
Per Page      1 - 8 of 8
  • 1