Rod Holders

Sort By:  
61883XL.jpg
Lee's Tackle - Lee's Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.900" O.D. Pipe (61883)
Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.900" O.D. Pipe

Specifications:
  • Color: Black
  • Pipe Size: #4
  • Fits: 1.900" O.D. Pipe
  • Mount: Horizontal


JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.

These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Out of Stock
$95.35
62131XL.jpg
Lee's Tackle - Lee's Rod and Reel Hanger Set - Avet 50W - Bright Gold (62131)
Rod Storage Systems

Rod and Reel Hanger Set

Anodized Finish: Gold
For: Avet 50W

Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
Out of Stock
$45.74
62132XL.jpg
Lee's Tackle - Lee's Rod and Reel Hanger Set - Avet 30W - Bright Gold (62132)
Rod Storage Systems

Rod and Reel Hanger Set

Anodized Finish: Gold
For: Avet 30W

Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
$37.19
62151XL.jpg
Lee's Tackle - Lee's Rod Butt Extender f/Short-Butt Rods In Heavy Rod Holder (62151)
Rod Butt Extender f/Short-Butt Rods In Heavy Rod Holder

Stainless Steel Rod Butt Extender enables short butt rods to lock onto pin in heavy rodholders.
$19.08
62232XL.jpg
Lee's Tackle - Lee's Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.900" O.D. Pipe (62232)
Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.900" O.D. Pipe

Specifications:
  • Color: White
  • Pipe Size: #4
  • Fits: 1.900" O.D. Pipe
  • Mount: Horizontal


JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.

These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.

All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
Out of Stock
$95.35
62244XL.jpg
C.E. Smith - C.E. Smith Aluminum Clamp-On Rod Holder - Horizontal - 1.05" OD - Fits 3/4" Pipe (62244)
Aluminum Clamp-On Rod Holder - Horizontal - 1.05" OD - Fits 3/4" Pipe

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.
These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$68.10
62246XL.jpg
C.E. Smith - C.E. Smith Aluminum Clamp-On Rod Holder - Horizontal - 1.315" OD - Fits 1" Pipe (62246)
Aluminum Clamp-On Rod Holder - Horizontal - 1.315" OD - Fits 1" Pipe

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.
These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$69.38
62247XL.jpg
C.E. Smith - C.E. Smith Aluminum Clamp-On Rod Holder - Vertical - 1.315" OD - Fits 1" Pipe (62247)
Aluminum Clamp-On Rod Holder - Vertical - 1.315" OD - Fits 1" Pipe

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.
These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$74.01
62248XL.jpg
C.E. Smith - C.E. Smith Aluminum Clamp-On Rod Holder - Horizontal - 1.66" OD - Fits 1-1/4" Pipe (62248)
Aluminum Clamp-On Rod Holder - Horizontal - 1.66" OD - Fits 1-1/4" Pipe

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.
These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$69.82
62249XL.jpg
C.E. Smith - C.E. Smith Aluminum Clamp-On Rod Holder - Vertical - 1.66" OD - Fits 1-1/4" Pipe (62249)
Aluminum Clamp-On Rod Holder - Vertical - 1.66" OD - Fits 1-1/4" Pipe

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.
These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.
$64.25
62250XL.jpg
C.E. Smith - C.E. Smith Aluminum Clamp-On Rod Holder - Horizontal - 1.90" OD - Fits 1-1/2" Pipe (62250)
Aluminum Clamp-On Rod Holder - Horizontal - 1.90" OD - Fits 1-1/2" Pipe

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.
These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$69.82
62251XL.jpg
C.E. Smith - C.E. Smith Aluminum Clamp-On Rod Holder - Vertical - 1.90" OD - Fits 1-1/2" Pipe (62251)
Aluminum Clamp-On Rod Holder - Vertical - 1.90" OD - Fits 1-1/2" Pipe

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.
These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$67.69
62252XL.jpg
C.E. Smith - C.E. Smith Aluminum Clamp-On Rod Holder - Horizontal - 2.375" OD - Fits 2" Pipe (62252)
Aluminum Clamp-On Rod Holder - Horizontal - 2.375" OD - Fits 2" Pipe

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.
These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$59.49
62253XL.jpg
C.E. Smith - C.E. Smith Aluminum Clamp-On Rod Holder - Vertical - 2.375" OD - Fits 2" Pipe (62253)
Aluminum Clamp-On Rod Holder - Vertical - 2.375" OD - Fits 2" Pipe

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.
These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$69.01
62254XL.jpg
C.E. Smith - C.E. Smith Single Aluminum 5° Transom Mount Rod Holder (62254)
Single Aluminum 5° Transom Mount Rod Holder

The perfect way to add rod holders to the transom area. Designed with outboard engine wells in mind. An ideal way to add rod holders to a seating station. These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tallgimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected. Mount vertically or with some outward angle for a wider fishing spread. Tube leans 5° away from the 3" tall x 2-3/4" wide mounting base. 10" overall height. Includes white vinyl liner.
$69.01
63571XL.jpg
Tigress - Tigress Dual Aluminum Kite Rod Holder - Straight Butt (63571)
Dual Aluminum Kite Rod Holder - Straight Butt

Features:
  • Designed to increase your rod storage capacity, or use one side for your kite rod and the other for your fishing rod
  • Constructed of cold drawn anodized aluminum
  • Tube ID 1-5/8" Base OD 1.49"
$111.18
63573XL.jpg
Tigress - Tigress Offset Triple Aluminum Rod Holder - Straight Butt (63573)
Offset Triple Aluminum Rod Holder - Straight Butt

Features:
  • Triple offset can be used port or starboard
  • Additional rod storage or for kite fishing
  • Constructed of anodized aluminum
  • Tube ID 1-7/8" Base OD 1.49"
$222.40
63574XL.jpg
Tigress - Tigress Triple Aluminum Kite Rod Holder - Bent Butt - Brushed (63574)

Triple Aluminum Kite Rod Holder - Bent Butt - Brushed


Features:

  • Rod holder is used for 1 kite rod and 2 additional rods to increase your rod storage capacity and keep them up and out of the way
  • Constructed of cold drawn anodized aluminum
  • Tube ID 1-5/8" Base OD 1.49"


$144.56
63575XL.jpg
Tigress - Tigress Triple Aluminum Kite Rod Holder - Bent Butt - Polished (63575)

Triple Aluminum Kite Rod Holder - Bent Butt - Polished


Features:

  • Rod holder is used for 1 kite rod and 2 additional rods to increase your rod storage capacity and keep them up and out of the way
  • Constructed of cold drawn anodized aluminum
  • Tube ID 1-5/8" Base OD 1.49"


Out of Stock
$170.50
63576XL.jpg
Tigress - Tigress Triple Aluminum Kite Rod Holder - Straight Butt - Polished (63576)
Triple Aluminum Kite Rod Holder - Straight Butt - Polished

Features:
  • Rod holder is used for 1 kite rod and 2 additional rods to increase your rod storage capacity and keep them up and out of the way
  • Constructed of cold drawn anodized aluminum
  • Tube ID 1-5/8" Base OD 1.49"
$170.50
63577XL.jpg
Tigress - Tigress Five Banger Aluminum Rod Holder - Straight Butt (63577)
Five Banger Aluminum Rod Holder - Straight Butt

Features:
  • Designed to increase your rod storage capacity from 1 to 5 and keep your fishing rods in easy reach
  • Constructed of cold drawn high polished anodized aluminum
  • Tube ID 1-5/8" Base OD 1.49"
Out of Stock
$296.55
63578XL.jpg
Tigress - Tigress Five Banger Aluminum Rod Holder - Bent Butt (63578)
Five Banger Aluminum Rod Holder - Bent Butt

Features:
  • Designed to increase your rod storage capacity from 1 to 5 and keep your fishing rods in easy reach
  • Constructed of cold drawn high polished anodized aluminum
  • Tube ID 1-5/8" Base OD 1.49"

$296.55
63614XL.jpg
Tigress - Tigress Oval Head SS Gunnel Mount Rod Holder - 30° - 9" (63614)
Oval Head SS Gunnel Mount Rod Holder - 30° - 9"

Crafted of 316 Stainless Steel

  • Head Size: 3.28" x 4.06"
  • Length: 9"
  • Angle: 30° Head
  • Inner Diameter: 1-5/8"
Out of Stock
$70.71
63615XL.jpg
Tigress - Tigress Oval Head SS Gunnel Mount Rod Holder - 0° - 9" (63615)
Oval Head SS Gunnel Mount Rod Holder - 0° - 9"

Crafted of 316 Stainless Steel

  • Head Size: 3.28" x 4.06"
  • Length: 9"
  • Angle: 0° Head
  • Inner Diameter: 1-5/8"
$70.71
63616XL.jpg
Tigress - Tigress Oval Head SS Gunnel Mount Rod Holder - 15° - 9" (63616)
Oval Head SS Gunnel Mount Rod Holder - 15° - 9"

Crafted of 316 Stainless Steel

  • Head Size: 3.28" x 4.06"
  • Length: 9"
  • Angle: 15° Head
  • Inner Diameter: 1-5/8"
$70.71
63617XL.jpg
Tigress - Tigress Oval Head SS Gunnel Mount Rod Holder - 30° - 10-1/2" (63617)
Oval Head SS Gunnel Mount Rod Holder - 0° - 10-1/2"

Crafted of 316 Stainless Steel

  • Head Size: 3.85" x 4.88"
  • Length: 10-1/2"
  • Angle: 30° Head
  • Inner Diameter: 1-7/8"
$93.22
63618XL.jpg
Tigress - Tigress Oval Head SS Gunnel Mount Rod Holder - 0° - 10-1/2" (63618)
Oval Head SS Gunnel Mount Rod Holder - 0° - 10-1/2"

Crafted of 316 Stainless Steel

  • Head Size: 3.85" x 4.88"
  • Length: 10-1/2"
  • Angle: 0° Head
  • Inner Diameter: 1-7/8"
$93.22
63619XL.jpg
Tigress - Tigress Oval Head SS Gunnel Mount Rod Holder - 15° - 10-1/2" (63619)
Oval Head SS Gunnel Mount Rod Holder - 15° - 10-1/2"

Crafted of 316 Stainless Steel

  • Head Size: 3.85" x 4.88"
  • Length: 10-1/2"
  • Angle: 15° Head
  • Inner Diameter: 1-7/8"
$93.22
63620XL.jpg
Tigress - Tigress Round Head Closed Base Rod Holder - 30° - 9" (63620)
Round Head Closed Base Rod Holder - 30° - 9"

Heavy duty, round head, closed end base with drain hole to accept 1/4" NPT pipe to hose fitting.

  • Head Size: 3.85"
  • Length: 9"
  • Angle: 30° Head
  • Inner Diameter: 1-5/8"
Out of Stock
$83.75
63621XL.jpg
Tigress - Tigress Round Head Closed Base Rod Holder - 15° - 9" (63621)
Round Head Closed Base Rod Holder - 15° - 9"

Heavy duty, round head, closed end base with drain hole to accept 1/4" NPT
pipe to hose fitting.

  • Head Size: 3.85"
  • Length: 9"
  • Angle: 15° Head
  • Inner Diameter: 1-5/8"
$83.75
63622XL.jpg
Tigress - Tigress Round Head Closed Base Rod Holder - 0° - 9" (63622)
Round Head Closed Base Rod Holder - 0° - 9"

Heavy duty, round head, closed end base with drain hole to accept 1/4" NPT
pipe to hose fitting.

  • Head Size: 3.85"
  • Length: 9"
  • Angle: 0° Head
  • Inner Diameter: 1-5/8"

$83.75
63623XL.jpg
Tigress - Tigress Round Head Closed Base Rod Holder - 30° - 10-1/2" (63623)
Round Head Closed Base Rod Holder - 30° - 10-1/2"

Heavy duty, round head, closed end base with drain hole to accept 1/4" NPT
pipe to hose fitting.

  • Head Size: 4.13"
  • Length: 10-1/2"
  • Angle: 30° Head
  • Inner Diameter: 1-7/8"

Out of Stock
$114.89
63625XL.jpg
Tigress - Tigress Round Head Closed Base Rod Holder - 0° - 10-1/2" (63625)
Round Head Closed Base Rod Holder - 0° - 10-1/2"

Heavy duty, round head, closed end base with drain hole to accept 1/4" NPT
pipe to hose fitting.

  • Head Size: 4.13"
  • Length: 10-1/2"
  • Angle: 0° Head
  • Inner Diameter: 1-7/8"

Out of Stock
$114.89
63626XL.jpg
Tigress - Tigress Blind Mount Round Head Closed Base Rod Holder - 30° - 9" (63626)
Blind Mount Round Head Closed Base Rod Holder - 30° - 9"

Eliminate fastening from the top of flange and enhance the look of your gunnel
With drain hole to accept 1/4" NPT pipe to hose fitting

  • Head Size: 3.84"
  • Length: 9"
  • Angle: 30° Head
  • Inner Diameter: 1-5/8"

$96.35
63627XL.jpg
Tigress - Tigress Blind Mount Round Head Closed Base Rod Holder - 15° - 9" (63627)
Blind Mount Round Head Closed Base Rod Holder - 15° - 9"

Eliminate fastening from the top of flange and enhance the look of your gunnel
With drain hole to accept 1/4" NPT pipe to hose fitting

  • Head Size: 3.84"
  • Length: 9"
  • Angle: 15° Head
  • Inner Diameter: 1-5/8"
$96.35
63628XL.jpg
Tigress - Tigress Blind Mount Round Head Closed Base Rod Holder - 0° - 9" (63628)
Blind Mount Round Head Closed Base Rod Holder - 0° - 9"

Eliminate fastening from the top of flange and enhance the look of your gunnel
With drain hole to accept 1/4" NPT pipe to hose fitting

  • Head Size: 3.84"
  • Length: 9"
  • Angle: 0° Head
  • Inner Diameter: 1-5/8"

Out of Stock
$96.35
63629XL.jpg
Tigress - Tigress Blind Mount Round Head Swivel Base Rod Holder - 30° - 9" (63629)
Blind Mount Round Head Swivel Base Rod Holder - 30° - 9"

Eliminate fastening from the top of flange and enhance the look of your gunnel
Swivel base is designed to be used primarily with bent butt tackle

  • Head Size: 3.84"
  • Length: 9"
  • Angle: 30° Head
  • Inner Diameter: 1-5/8"

$114.89
63630XL.jpg
Tigress - Tigress Blind Mount Round Head Swivel Base Rod Holder - 15° - 9" (63630)
Blind Mount Round Head Swivel Base Rod Holder - 15° - 9"

Eliminate fastening from the top of flange and enhance the look of your gunnel
Swivel base is designed to be used primarily with bent butt tackle

  • Head Size: 3.84"
  • Length: 9"
  • Angle: 15° Head
  • Inner Diameter: 1-5/8"

$114.89
63631XL.jpg
Tigress - Tigress Blind Mount Round Head Swivel Base Rod Holder - 0° - 9" (63631)
Blind Mount Round Head Swivel Base Rod Holder - 0° - 9"

Eliminate fastening from the top of flange and enhance the look of your gunnel
Swivel base is designed to be used primarily with bent butt tackle

  • Head Size: 3.84"
  • Length: 9"
  • Angle: 0° Head
  • Inner Diameter: 1-5/8"
$114.89
63632XL.jpg
Tigress - Tigress Oval Head Closed Base Rod Holder - 30° - 9" (63632)
Oval Head Closed Base Rod Holder - 30° - 9"

Heavy duty oval head closed end base, with drain hole to accept 1/4"
NPT pipe to hose fitting

  • Head Size: 3.28" x 4.06"
  • Length: 9"
  • Angle: 30° Head
  • Inner Diameter: 1-5/8"
$88.92
63633XL.jpg
Tigress - Tigress Oval Head Closed Base Rod Holder - 15° - 9" (63633)
Oval Head Closed Base Rod Holder - 15° - 9"

Heavy duty oval head closed end base, with drain hole to accept 1/4"
NPT pipe to hose fitting

  • Head Size: 3.28" x 4.06"
  • Length: 9"
  • Angle: 15° Head
  • Inner Diameter: 1-5/8"
$88.92
63634XL.jpg
Tigress - Tigress Oval Head Closed Base Rod Holder - 0° - 9" (63634)
Oval Head Closed Base Rod Holder - 0° - 9"

Heavy duty oval head closed end base, with drain hole to accept 1/4"
NPT pipe to hose fitting

  • Head Size: 3.28" x 4.06"
  • Length: 9"
  • Angle: 0° Head
  • Inner Diameter: 1-5/8"
$88.92
63635XL.jpg
Tigress - Tigress Blind Mount Oval Head Closed Base Rod Holder - 30° - 9" (63635)
Blind Mount Oval Head Closed Base Rod Holder - 30° - 9"

Eliminate fastening from the top of flange
Heavy duty oval head closed end base, with drain hole to accept 1/4"
NPT pipe to hose fitting

  • Head Size: 3.28" x 4.06"
  • Length: 9"
  • Angle: 30° Head
  • Inner Diameter: 1-5/8"
Out of Stock
$96.35
63636XL.jpg
Tigress - Tigress Blind Mount Oval Head Closed Base Rod Holder - 15° - 9" (63636)
Blind Mount Oval Head Closed Base Rod Holder - 15° - 9"

Eliminate fastening from the top of flange
Heavy duty oval head closed end base, with drain hole to accept 1/4"
NPT pipe to hose fitting

  • Head Size: 3.28" x 4.06"
  • Length: 9"
  • Angle: 15° Head
  • Inner Diameter: 1-5/8"
Out of Stock
$96.35
63637XL.jpg
Tigress - Tigress Blind Mount Oval Head Closed Base Rod Holder - 0° - 9" (63637)
Blind Mount Oval Head Closed Base Rod Holder - 0° - 9"

Eliminate fastening from the top of flange
Heavy duty oval head closed end base, with drain hole to accept 1/4"
NPT pipe to hose fitting

  • Head Size: 3.28" x 4.06"
  • Length: 9"
  • Angle: 0° Head
  • Inner Diameter: 1-5/8"

Out of Stock
$96.35
63638XL.jpg
Tigress - Tigress 9" Side Mount Rod Holder - 1-5/8" I.D. (63638)
9" Side Mount Rod Holder - 1-5/8" I.D.

  • 316 Stainless Steel
  • Designed for applications where clamp-on or flush mount holders are not practical
  • Can be mounted on any vertical flat surface
  • White vinyl insert included to protect your rod
$96.35
63639XL.jpg
Tigress - Tigress 9" Swivel Side Mount Rod Holder - 1-5/8" I.D. (63639)
9" Swivel Side Mount Rod Holder - 1-5/8" I.D.

  • 316 Stainless Steel
  • Designed for applications where clamp-on or flush mount holders are not practical
  • Can be mounted on any vertical flat surface
  • White vinyl insert included to protect your rod
Out of Stock
$118.60
63640XL.jpg
Tigress - Tigress Stainless Steel Pipe to Hose Adapter - 1/4" IPS (63640)
Stainless Steel Pipe to Hose Adapter - 1/4" IPS

Stainless Steel Pipe to Hose Adapter - 1/4" IPS
Out of Stock
$10.00
63641XL.jpg
Tigress - Tigress Nylon Pipe to Hose Adapter - 1/4" IPS (63641)
Nylon Pipe to Hose Adapter - 1/4" IPS

Nylon Pipe to Hose Adapter - 1/4" IPS
Out of Stock
$2.58
63642XL.jpg
Tigress - Tigress Round Head Rod Holder Backing Plate (63642)
Round Head Rod Holder Backing Plate

Round head backing plate for rod holders
$17.03
Per Page      1 - 50 of 147