Propeller

Sort By:  
31656XL.jpg
Turning Point Propellers - Turning Point Hub Kit #28 (31656)
Turning Point Hub Kit: 28

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$19.64
31657XL.jpg
Turning Point Propellers - Turning Point R2-1015 Hustler® Aluminum - Right-Hand Propeller - 10.375 X 13 - 3-Blade (31657)
R2-1013 Hustler® Aluminum Propeller

Size: 10-3/8 x 13 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

9.9 - 35 hp Propellers w/ 3" Gearcase
Engine BrandHUBPART #
HONDA®:
BF25
2811200800
MERCURY® & MARINER®:
4 stroke ('06 & newer, cotter pin shaft): 25hp, 30hp
2811200800
PARSUN®:
20hp, 25hp
2511200500
NISSAN® & TOHATSU®:
2 and 4 stroke: 25hp, 30hp
2811200800
YAMAHA®:
2 stroke; 20hp, 25hp, 30hp
2511200500

WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Out of Stock
$49.98
31658XL.jpg
Turning Point Propellers - Turning Point Hub Kit #22 (31658)
Turning Point Hub Kit: 22

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$19.64
31659XL.jpg
Turning Point Propellers - Turning Point Hub Kit #25 (31659)
Turning Point Hub Kit: 25

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$19.64
31672XL.jpg
Turning Point Propellers - Turning Point H2-1208 Hustler® Aluminum - Right-Hand Propeller - 12.5 X 8 - 3-Blade (31672)
H2-1208 Hustler® Aluminum Propeller

Size: 12-1/2 x 8 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

25 - 75 hp Propellers w/ 3-1/2" Gearcase
Engine Brand - 13 Spline PROP ShaftHUBPART #
EVINRUDE® / JOHNSON®:
2 cyl: 40hp, 48hp / 50hp ('75-'05) / 55hp ('76-'79) / 60hp, 65hp ('80-'85)
3cyl. (with small gearcase): 75hp ('75-'85)
Sprint and Formula E ('86-'92)
1211300200
$60.25
31673XL.jpg
Turning Point Propellers - Turning Point H2-1210 Hustler® Aluminum - Right-Hand Propeller - 12 X 10.5 - 3-Blade (31673)
H2-1210 Hustler® Aluminum Propeller

Size: 10 x 10-1/2 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

25 - 75 hp Propellers w/ 3-1/2" Gearcase
Engine Brand - 13 Spline PROP ShaftHUBPART #
EVINRUDE® / JOHNSON®:
2 cyl: 40hp, 48hp / 50hp ('75-'05) / 55hp ('76-'79) / 60hp, 65hp ('80-'85)
3cyl. (with small gearcase): 75hp ('75-'85)
Sprint and Formula E ('86-'92)
1211300200
$50.88
31683XL.jpg
Turning Point Propellers - Turning Point R1-1011 Hustler® Aluminum - Right-Hand Propeller - 10.5 X 11 - 3-Blade (31683)
R1-1011 Hustler® Aluminum Propeller

Size: 10-1/2 x 11 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish


9.9 - 35 hp Propellers w/ 3" Gearcase
Engine BrandHUBPART #
EVINRUDE® / JOHNSON®: (14 spline)
2 stroke; 20, 25 ('84+), 25 commercial ('93-'05), 30 ('84+), 35 ('76-'05)/ E-Tec: 25hp, 30hp / H.O.; 15hp
2211200200
FORCE®: (10 spline)
25hp ('95-'98)
2111200100
MERCURY® & MARINER®: (10 spline)
2 stroke: 18hp ('80-'85), 20hp ('86 & Newer), 25hp ('85 & Newer)
4 stoke Bigfoot: 9.9hp, 15hp
2111200100

WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

$49.98
31684XL.jpg
Turning Point Propellers - Turning Point R1-1013 Hustler® Aluminum - Right-Hand Propeller - 10.125 X 13 - 3-Blade (31684)
R1-1013 Hustler® Aluminum Right-Hand 3-Blade Propeller - 10.125 x 13

Size: 10.125 x 13 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

The most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:
  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

9.9 - 35 hp Propellers w/ 3" Gearcase
Engine BrandHUBPART #
EVINRUDE® / JOHNSON®: (14 spline)
2 stroke; 20, 25 ('84+), 25 commercial ('93-'05), 30 ('84+), 35 ('76-'05)/ E-Tec: 25hp, 30hp / H.O.; 15hp
2211200200
FORCE®: (10 spline)
25hp ('95-'98)
2111200100
MERCURY® & MARINER®: (10 spline)
2 stroke: 18hp ('80-'85), 20hp ('86 & Newer), 25hp ('85 & Newer)
4 stoke Bigfoot: 9.9hp, 15hp
2111200100


WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

$49.98
31685XL.jpg
Turning Point Propellers - Turning Point R2-1011 Hustler® Aluminum - Right-Hand Propeller - 10.375 X 11 - 3-Blade (31685)
R2-1011 Hustler® Aluminum Propeller

Size: 10-3/8 x 11 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

9.9 - 35 hp Propellers w/ 3" Gearcase
Engine BrandHUBPART #
HONDA®:
BF25
2811200800
MERCURY® & MARINER®:
4 stroke ('06 & newer, cotter pin shaft): 25hp, 30hp
2811200800
PARSUN®:
20hp, 25hp
2511200500
NISSAN® & TOHATSU®:
2 and 4 stroke: 25hp, 30hp
2811200800
YAMAHA®:
2 stroke; 20hp, 25hp, 30hp
2511200500

WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

$49.98
31686XL.jpg
Turning Point Propellers - Turning Point Hub Kit #506 (31686)
Turning Point Hub Kit: 506

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage
  • Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value.
  • Also adapts to all Michigan Wheel® and Mercury® interchangeable propellers

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$34.51
31687XL.jpg
Turning Point Propellers - Turning Point Hub Kit #21 (31687)
Turning Point Hub Kit: 21

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$19.64
31689XL.jpg
Turning Point Propellers - Turning Point Hub Kit #500 (31689)
Turning Point Hub Kit: 500

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage
  • Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value.
  • Also adapts to all Michigan Wheel® and Mercury® interchangeable propellers

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$34.51
31690XL.jpg
Turning Point Propellers - Turning Point Hub Kit #505 (31690)
Turning Point Hub Kit: 505

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage
  • Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value.
  • Also adapts to all Michigan Wheel® and Mercury® interchangeable propellers

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$34.51
31693XL.jpg
Turning Point Propellers - Turning Point H1-1011 Hustler® Aluminum - Right-Hand Propeller - 10.875 X 11 - 3-Blade (31693)
H1-1011 Hustler® Aluminum Propeller

Size: 10-7/8 x 11 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

25 - 75 hp Propellers w/ 3-1/2" Gearcase
Engine Brand - 13 Spline PROP ShaftHUBPART #
EVINRUDE® / JOHNSON®:
4 stroke: 40hp, 50hp
1111300101
FORCE®:
40hp ('95-'98), 50hp ('95-'98), 70hp ('91-95'), 75hp ('96-'98)
1111300101
HONDA®:
BF 4 stroke: 35, 40, 45, 50, 60hp, (not P60)
1211300200
MERCURY® & MARINER®:
2 stroke: 30hp ('94+) / 35, 45, 55/40, 50, 60 ('77+) / 70hp ('83-)
4 stroke: 25hp Bigfoot / 30hp ('94-'05) / 40hp to 60hp
1111300101
NISSAN® & TOHATSU®:
40C, 40D, 50D, 50C, 60A, 70A2, 60B, 70B
1311300300
PARSUN®:
T30, T35, T36, T40
1211300200
SUZUKI®:
DT 2 stroke ('89+): 35C, 40, 50, 50M, 55, 60, 65hp
DT 4 stroke: 40hp, 50hp / ('10+): 40A, 50A, 60A
1111300101
YAMAHA®:
2 stroke: 40hp to 55hp
4 stroke: FT25hp High Thrust, 30hp to 60hp
1211300200
Out of Stock
$56.53
31694XL.jpg
Turning Point Propellers - Turning Point H1-1014 Hustler® Aluminum - Right-Hand Propeller - 10.375 X 14 - 3-Blade (31694)
H1-1014 Hustler® Aluminum Propeller

Size: 10-3/8 x 14 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

25 - 75 hp Propellers w/ 3-1/2" Gearcase
Engine Brand - 13 Spline PROP ShaftHUBPART #
EVINRUDE® / JOHNSON®:
4 stroke: 40hp, 50hp
1111300101
FORCE®:
40hp ('95-'98), 50hp ('95-'98), 70hp ('91-95'), 75hp ('96-'98)
1111300101
HONDA®:
BF 4 stroke: 35, 40, 45, 50, 60hp, (not P60)
1211300200
MERCURY® & MARINER®:
2 stroke: 30hp ('94+) / 35, 45, 55/40, 50, 60 ('77+) / 70hp ('83-)
4 stroke: 25hp Bigfoot / 30hp ('94-'05) / 40hp to 60hp
1111300101
NISSAN® & TOHATSU®:
40C, 40D, 50D, 50C, 60A, 70A2, 60B, 70B
1311300300
PARSUN®:
T30, T35, T36, T40
1211300200
SUZUKI®:
DT 2 stroke ('89+): 35C, 40, 50, 50M, 55, 60, 65hp
DT 4 stroke: 40hp, 50hp / ('10+): 40A, 50A, 60A
1111300101
YAMAHA®:
2 stroke: 40hp to 55hp
4 stroke: FT25hp High Thrust, 30hp to 60hp
1211300200
Out of Stock
$56.53
31695XL.jpg
Turning Point Propellers - Turning Point H1-1015 Hustler® Aluminum - Right-Hand Propeller - 10.125 X 15 - 3-Blade (31695)
H1-1015 Hustler® Aluminum Propeller

Size: 10-1/8 x 15 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

25 - 75 hp Propellers w/ 3-1/2" Gearcase
Engine Brand - 13 Spline PROP ShaftHUBPART #
EVINRUDE® / JOHNSON®:
4 stroke: 40hp, 50hp
1111300101
FORCE®:
40hp ('95-'98), 50hp ('95-'98), 70hp ('91-95'), 75hp ('96-'98)
1111300101
HONDA®:
BF 4 stroke: 35, 40, 45, 50, 60hp, (not P60)
1211300200
MERCURY® & MARINER®:
2 stroke: 30hp ('94+) / 35, 45, 55/40, 50, 60 ('77+) / 70hp ('83-)
4 stroke: 25hp Bigfoot / 30hp ('94-'05) / 40hp to 60hp
1111300101
NISSAN® & TOHATSU®:
40C, 40D, 50D, 50C, 60A, 70A2, 60B, 70B
1311300300
PARSUN®:
T30, T35, T36, T40
1211300200
SUZUKI®:
DT 2 stroke ('89+): 35C, 40, 50, 50M, 55, 60, 65hp
DT 4 stroke: 40hp, 50hp / ('10+): 40A, 50A, 60A
1111300101
YAMAHA®:
2 stroke: 40hp to 55hp
4 stroke: FT25hp High Thrust, 30hp to 60hp
1211300200
Out of Stock
$56.53
31696XL.jpg
Turning Point Propellers - Turning Point H1-1208 Hustler® Aluminum - Right-Hand Propeller - 12.5 X 8 - 3-Blade (31696)
H1-1208 Hustler® Aluminum Propeller

Size: 12-1/2 x 8 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

25 - 75 hp Propellers w/ 3-1/2" Gearcase
Engine Brand - 13 Spline PROP ShaftHUBPART #
EVINRUDE® / JOHNSON®:
4 stroke: 40hp, 50hp
1111300101
FORCE®:
40hp ('95-'98), 50hp ('95-'98), 70hp ('91-95'), 75hp ('96-'98)
1111300101
HONDA®:
BF 4 stroke: 35, 40, 45, 50, 60hp, (not P60)
1211300200
MERCURY® & MARINER®:
2 stroke: 30hp ('94+) / 35, 45, 55/40, 50, 60 ('77+) / 70hp ('83-)
4 stroke: 25hp Bigfoot / 30hp ('94-'05) / 40hp to 60hp
1111300101
NISSAN® & TOHATSU®:
40C, 40D, 50D, 50C, 60A, 70A2, 60B, 70B
1311300300
PARSUN®:
T30, T35, T36, T40
1211300200
SUZUKI®:
DT 2 stroke ('89+): 35C, 40, 50, 50M, 55, 60, 65hp
DT 4 stroke: 40hp, 50hp / ('10+): 40A, 50A, 60A
1111300101
YAMAHA®:
2 stroke: 40hp to 55hp
4 stroke: FT25hp High Thrust, 30hp to 60hp
1211300200

WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

$56.53
31697XL.jpg
Turning Point Propellers - Turning Point H1-1210 Hustler® Aluminum - Right-Hand Propeller - 12 X 10.5 - 3-Blade (31697)
H1-1210 Hustler® Aluminum Propeller

Size: 12 x 10-1/2 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

25 - 75 hp Propellers w/ 3-1/2" Gearcase
Engine Brand - 13 Spline PROP ShaftHUBPART #
EVINRUDE® / JOHNSON®:
4 stroke: 40hp, 50hp
1111300101
FORCE®:
40hp ('95-'98), 50hp ('95-'98), 70hp ('91-95'), 75hp ('96-'98)
1111300101
HONDA®:
BF 4 stroke: 35, 40, 45, 50, 60hp, (not P60)
1211300200
MERCURY® & MARINER®:
2 stroke: 30hp ('94+) / 35, 45, 55/40, 50, 60 ('77+) / 70hp ('83-)
4 stroke: 25hp Bigfoot / 30hp ('94-'05) / 40hp to 60hp
1111300101
NISSAN® & TOHATSU®:
40C, 40D, 50D, 50C, 60A, 70A2, 60B, 70B
1311300300
PARSUN®:
T30, T35, T36, T40
1211300200
SUZUKI®:
DT 2 stroke ('89+): 35C, 40, 50, 50M, 55, 60, 65hp
DT 4 stroke: 40hp, 50hp / ('10+): 40A, 50A, 60A
1111300101
YAMAHA®:
2 stroke: 40hp to 55hp
4 stroke: FT25hp High Thrust, 30hp to 60hp
1211300200
$56.53
31698XL.jpg
Turning Point Propellers - Turning Point H2-1117 Hustler® Aluminum - Right-Hand Propeller - 11.75 X 17 - 3-Blade (31698)
H2-1117 Hustler® Aluminum Propeller

Size: 11-3/4 x 17 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

25 - 75 hp Propellers w/ 3-1/2" Gearcase
Engine Brand - 13 Spline PROP ShaftHUBPART #
EVINRUDE® / JOHNSON®:
2 cyl: 40hp, 48hp / 50hp ('75-'05) / 55hp ('76-'79) / 60hp, 65hp ('80-'85)
3cyl. (with small gearcase): 75hp ('75-'85)
Sprint and Formula E ('86-'92)
1211300200

WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

$56.53
31699XL.jpg
Turning Point Propellers - Turning Point H2-1213 Hustler® Aluminum - Right-Hand Propeller - 12.5 X 13 - 3-Blade (31699)
H2-1213 Hustler® Aluminum Propeller

Size: 12-1/2 x 13 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

25 - 75 hp Propellers w/ 3-1/2" Gearcase
Engine Brand - 13 Spline PROP ShaftHUBPART #
EVINRUDE® / JOHNSON®:
2 cyl: 40hp, 48hp / 50hp ('75-'05) / 55hp ('76-'79) / 60hp, 65hp ('80-'85)
3cyl. (with small gearcase): 75hp ('75-'85)
Sprint and Formula E ('86-'92)
1211300200
$56.53
31700XL.jpg
Turning Point Propellers - Turning Point H2-1215 Hustler® Aluminum - Right-Hand Propeller - 12.25 X 15 - 3-Blade (31700)
H2-1215 Hustler® Aluminum Propeller

Size: 12-1/4 x 15 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

25 - 75 hp Propellers w/ 3-1/2" Gearcase
Engine Brand - 13 Spline PROP ShaftHUBPART #
EVINRUDE® / JOHNSON®:
2 cyl: 40hp, 48hp / 50hp ('75-'05) / 55hp ('76-'79) / 60hp, 65hp ('80-'85)
3cyl. (with small gearcase): 75hp ('75-'85)
Sprint and Formula E ('86-'92)
1211300200
$56.53
31701XL.jpg
Turning Point Propellers - Turning Point LE1/LE2-1321 Hustler® Aluminum - Right-Hand Propeller - 13.25 X 21 - 3-Blade (31701)
LE1/LE2-1321 Hustler® Aluminum Propeller

Size: 13-1/4 x 21 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

40-150hp Propellers w/ 4-1/4" Gearcase
Engine Brand - Various spline PROP shaftsHUBPART #
EVINRUDE® / JOHNSON®: (13 spline shaft)
2 cyl: 50hp ('71-'74) / 45 to 55hp commercial
3 cyl: 55, 60, 65, 70hp, 75hp with large gearcase, 65hp commercial
4 cyl: 75, 85, 88, 90, 100, 110, 115, 120 ('86-'94), 125, 135 ('73-'76), 140 ('77-'84, '86-'94) / H.O.: 115hp
E-TEC: 40, 50, 60, 75hp / 20" shaft: 90, 115hp, 130hp ('09-'10)
50311500300
EVINRUDE® / JOHNSON®: (13 spline shaft)
4 stroke: 60hp, 70hp
50611500600
FORCE®: (15 spline shaft)
75hp ('99) / 90hp to 150hp ('95&Newer)
50111500100
HONDA®: (15 spline shaft)
('95-'98): 75hp, 90hp
50111500100
HONDA®: (15 spline shaft)
P60 / 75hp, 90hp ('99+) / 115hp, 130hp, (not 115D)
50711500700
MERCURY® & MARINER®: (15 spline shaft)
2 and 4 stroke
40 to 60 Bigfoot / 70 ('87-'89) / 75, 80 ('78-'89), 90, 100, 115, 125, 140hp
150 XR4/6 (thru 1993, includes equivalet Mariner Magnum I, II, III.)
OptiMax: 75, 90, 115, 125hp
50111500100
NISSAN® & TOHATSU®: (15 spline shaft)
60C, 70C / 90 to 140hp
50511500500
OMC®: (13 spline shaft)
Cobra 400: 2.3 to 3.0L ('78-'89) / Sea Drive: 1.6 to 1.8L
50311500300
PARSUN®: (15 spline shaft)
T60, T75, T85, T90
50011500000
SUZUKI®: (13 spline shaft)
DT 2 Stroke ('89+): 75 to 140hp
DF 4 stroke ('89-'09): 60hp, 70hp
50611500600
YAMAHA®: (15 spline shaft)
High Thrust: T50, FT60
2 stroke: 60 to 100hp
4 stroke: 70 to 100hp
50011500000
YAMAHA®: (15 spline shaft)
2 stroke: 115 to 130hp
4 stroke: 115hp
50511500500


WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Out of Stock
$70.81
31702XL.jpg
Turning Point Propellers - Turning Point LE1/LE2-1411 Hustler® Aluminum - Right-Hand Propeller - 14 X 11 - 3-Blade (31702)
LE1/LE2-1411 Hustler® Aluminum Propeller

Size: 14 x 11 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish


40-150hp Propellers w/ 4-1/4" Gearcase
Engine Brand - Various spline PROP shaftsHUBPART #
EVINRUDE® / JOHNSON®: (13 spline shaft)
2 cyl: 50hp ('71-'74) / 45 to 55hp commercial
3 cyl: 55, 60, 65, 70hp, 75hp with large gearcase, 65hp commercial
4 cyl: 75, 85, 88, 90, 100, 110, 115, 120 ('86-'94), 125, 135 ('73-'76), 140 ('77-'84, '86-'94) / H.O.: 115hp
E-TEC: 40, 50, 60, 75hp / 20" shaft: 90, 115hp, 130hp ('09-'10)
50311500300
EVINRUDE® / JOHNSON®: (13 spline shaft)
4 stroke: 60hp, 70hp
50611500600
FORCE®: (15 spline shaft)
75hp ('99) / 90hp to 150hp ('95&Newer)
50111500100
HONDA®: (15 spline shaft)
('95-'98): 75hp, 90hp
50111500100
HONDA®: (15 spline shaft)
P60 / 75hp, 90hp ('99+) / 115hp, 130hp, (not 115D)
50711500700
MERCURY® & MARINER®: (15 spline shaft)
2 and 4 stroke
40 to 60 Bigfoot / 70 ('87-'89) / 75, 80 ('78-'89), 90, 100, 115, 125, 140hp
150 XR4/6 (thru 1993, includes equivalet Mariner Magnum I, II, III.)
OptiMax: 75, 90, 115, 125hp
50111500100
NISSAN® & TOHATSU®: (15 spline shaft)
60C, 70C / 90 to 140hp
50511500500
OMC®: (13 spline shaft)
Cobra 400: 2.3 to 3.0L ('78-'89) / Sea Drive: 1.6 to 1.8L
50311500300
PARSUN®: (15 spline shaft)
T60, T75, T85, T90
50011500000
SUZUKI®: (13 spline shaft)
DT 2 Stroke ('89+): 75 to 140hp
DF 4 stroke ('89-'09): 60hp, 70hp
50611500600
YAMAHA®: (15 spline shaft)
High Thrust: T50, FT60
2 stroke: 60 to 100hp
4 stroke: 70 to 100hp
50011500000
YAMAHA®: (15 spline shaft)
2 stroke: 115 to 130hp
4 stroke: 115hp
50511500500


WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

$70.81
31703XL.jpg
Turning Point Propellers - Turning Point LE1/LE2-1413 Hustler® Aluminum - Right-Hand Propeller - 14 X 13 - 3-Blade (31703)
LE1/LE2-1413 Hustler® Aluminum Propeller

Size: 14 x 13 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish


40-150hp Propellers w/ 4-1/4" Gearcase
Engine Brand - Various spline PROP shaftsHUBPART #
EVINRUDE® / JOHNSON®: (13 spline shaft)
2 cyl: 50hp ('71-'74) / 45 to 55hp commercial
3 cyl: 55, 60, 65, 70hp, 75hp with large gearcase, 65hp commercial
4 cyl: 75, 85, 88, 90, 100, 110, 115, 120 ('86-'94), 125, 135 ('73-'76), 140 ('77-'84, '86-'94) / H.O.: 115hp
E-TEC: 40, 50, 60, 75hp / 20" shaft: 90, 115hp, 130hp ('09-'10)
50311500300
EVINRUDE® / JOHNSON®: (13 spline shaft)
4 stroke: 60hp, 70hp
50611500600
FORCE®: (15 spline shaft)
75hp ('99) / 90hp to 150hp ('95&Newer)
50111500100
HONDA®: (15 spline shaft)
('95-'98): 75hp, 90hp
50111500100
HONDA®: (15 spline shaft)
P60 / 75hp, 90hp ('99+) / 115hp, 130hp, (not 115D)
50711500700
MERCURY® & MARINER®: (15 spline shaft)
2 and 4 stroke
40 to 60 Bigfoot / 70 ('87-'89) / 75, 80 ('78-'89), 90, 100, 115, 125, 140hp
150 XR4/6 (thru 1993, includes equivalet Mariner Magnum I, II, III.)
OptiMax: 75, 90, 115, 125hp
50111500100
NISSAN® & TOHATSU®: (15 spline shaft)
60C, 70C / 90 to 140hp
50511500500
OMC®: (13 spline shaft)
Cobra 400: 2.3 to 3.0L ('78-'89) / Sea Drive: 1.6 to 1.8L
50311500300
PARSUN®: (15 spline shaft)
T60, T75, T85, T90
50011500000
SUZUKI®: (13 spline shaft)
DT 2 Stroke ('89+): 75 to 140hp
DF 4 stroke ('89-'09): 60hp, 70hp
50611500600
YAMAHA®: (15 spline shaft)
High Thrust: T50, FT60
2 stroke: 60 to 100hp
4 stroke: 70 to 100hp
50011500000
YAMAHA®: (15 spline shaft)
2 stroke: 115 to 130hp
4 stroke: 115hp
50511500500


WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

$70.81
31713XL.jpg
Turning Point Propellers - Turning Point Hub Kit #507 (31713)
Turning Point Hub Kit: 507

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage
  • Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value.
  • Also adapts to all Michigan Wheel® and Mercury® interchangeable propellers
$36.89
31714XL.jpg
Turning Point Propellers - Turning Point H1-1012 Hustler® Aluminum - Right-Hand Propeller - 10.75 X 12 - 3-Blade (31714)
H1-1012 Hustler® Aluminum Propeller

Size: 10-3/4 x 12 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

25 - 75 hp Propellers w/ 3-1/2" Gearcase
Engine Brand - 13 Spline PROP ShaftHUBPART #
EVINRUDE® / JOHNSON®:
4 stroke: 40hp, 50hp
1111300101
FORCE®:
40hp ('95-'98), 50hp ('95-'98), 70hp ('91-95'), 75hp ('96-'98)
1111300101
HONDA®:
BF 4 stroke: 35, 40, 45, 50, 60hp, (not P60)
1211300200
MERCURY® & MARINER®:
2 stroke: 30hp ('94+) / 35, 45, 55/40, 50, 60 ('77+) / 70hp ('83-)
4 stroke: 25hp Bigfoot / 30hp ('94-'05) / 40hp to 60hp
1111300101
NISSAN® & TOHATSU®:
40C, 40D, 50D, 50C, 60A, 70A2, 60B, 70B
1311300300
PARSUN®:
T30, T35, T36, T40
1211300200
SUZUKI®:
DT 2 stroke ('89+): 35C, 40, 50, 50M, 55, 60, 65hp
DT 4 stroke: 40hp, 50hp / ('10+): 40A, 50A, 60A
1111300101
YAMAHA®:
2 stroke: 40hp to 55hp
4 stroke: FT25hp High Thrust, 30hp to 60hp
1211300200
$56.53
31715XL.jpg
Turning Point Propellers - Turning Point LE1/LE2-1319 Hustler® Aluminum - Right-Hand Propeller - 13.25 X 19 - 3-Blade (31715)
LE1/LE2-1319 Hustler® Aluminum Propeller

Size: 13-1/4 x 19 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish


40-150hp Propellers w/ 4-1/4" Gearcase
Engine Brand - Various spline PROP shaftsHUBPART #
EVINRUDE® / JOHNSON®: (13 spline shaft)
2 cyl: 50hp ('71-'74) / 45 to 55hp commercial
3 cyl: 55, 60, 65, 70hp, 75hp with large gearcase, 65hp commercial
4 cyl: 75, 85, 88, 90, 100, 110, 115, 120 ('86-'94), 125, 135 ('73-'76), 140 ('77-'84, '86-'94) / H.O.: 115hp
E-TEC: 40, 50, 60, 75hp / 20" shaft: 90, 115hp, 130hp ('09-'10)
50311500300
EVINRUDE® / JOHNSON®: (13 spline shaft)
4 stroke: 60hp, 70hp
50611500600
FORCE®: (15 spline shaft)
75hp ('99) / 90hp to 150hp ('95&Newer)
50111500100
HONDA®: (15 spline shaft)
('95-'98): 75hp, 90hp
50111500100
HONDA®: (15 spline shaft)
P60 / 75hp, 90hp ('99+) / 115hp, 130hp, (not 115D)
50711500700
MERCURY® & MARINER®: (15 spline shaft)
2 and 4 stroke
40 to 60 Bigfoot / 70 ('87-'89) / 75, 80 ('78-'89), 90, 100, 115, 125, 140hp
150 XR4/6 (thru 1993, includes equivalet Mariner Magnum I, II, III.)
OptiMax: 75, 90, 115, 125hp
50111500100
NISSAN® & TOHATSU®: (15 spline shaft)
60C, 70C / 90 to 140hp
50511500500
OMC®: (13 spline shaft)
Cobra 400: 2.3 to 3.0L ('78-'89) / Sea Drive: 1.6 to 1.8L
50311500300
PARSUN®: (15 spline shaft)
T60, T75, T85, T90
50011500000
SUZUKI®: (13 spline shaft)
DT 2 Stroke ('89+): 75 to 140hp
DF 4 stroke ('89-'09): 60hp, 70hp
50611500600
YAMAHA®: (15 spline shaft)
High Thrust: T50, FT60
2 stroke: 60 to 100hp
4 stroke: 70 to 100hp
50011500000
YAMAHA®: (15 spline shaft)
2 stroke: 115 to 130hp
4 stroke: 115hp
50511500500


WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Out of Stock
$70.81
31716XL.jpg
Turning Point Propellers - Turning Point LE-1515 Hustler® Aluminum - Right-Hand Propeller - 15.25 X 15 - 3-Blade (31716)
LE-1515 Hustler® Aluminum Propeller

Size: 15-1/4 x 15 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish


90-300+hp Propellers w/ 4-3/4" Gearcase
Engine Brand - 15 spline PROP shaftHUBPART #
EVINRUDE® / JOHNSON®:
V4 with V6 large gearcase: 100hp commercial, 120hp ('85), 130hp ('95-'96), 140hp ('85)
Pleasure ('95&newer): 115hp, 130hp / H.O.: 150, 200, 225, 250hp
E-TEC: (25" shaft) 90hp, 115hp, 130hp ('09-'10) / 135hp to 300hp
V6: 135hp to 250hp / V8: 250hp to 300hp
50211500200
HONDA®:
BF115D, BF135, BF150, BF200 ('02-'12), BF225 ('02-'12)
50711500700
HONDA®:
BF200 ('13&Newer), BF225 ('13&Newer), BF250 ('12&Newer)
50811500800
MERCURY® & MARINER®: Note: Does not fit Pro XS
V6 135 to 300hp / Verado 135 to 275hp.
OptiMax: 150, 200, 250hp
50111500100
MERCRUISER®:
Alpha One and Bravo One ('83&Newer)
50111500100
OMC®:
Cobra 800: 3.0 to 7.5L / King Cobra: 454, 502 / Sea Drive: 2.0 to 4.0L
50211500200
SUZUKI®:
DT 2 stroke: 150hp to 225hp
50711500700
VOLVO® PENTA SX & OMC SX COBRA: (19 spline)
('94&Newer): 3.0 to 8.2L
Not available for Volvo DuoProp or Aquamatic drives.
50411500400
YAMAHA®:
2 and 4 stroke: 150 to 250hp / stern drives 3.0 to 7.4L
50511500500

WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

$76.16
31721XL.jpg
Turning Point Propellers - Turning Point H1-1013 Hustler® Aluminum - Right-Hand Propeller - 10.5 X 13 - 3-Blade (31721)
H1-1013 Hustler® Aluminum Propeller

Size: 10-1/2 x 13 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

25 - 75 hp Propellers w/ 3-1/2" Gearcase
Engine Brand - 13 Spline PROP ShaftHUBPART #
EVINRUDE® / JOHNSON®:
4 stroke: 40hp, 50hp
1111300101
FORCE®:
40hp ('95-'98), 50hp ('95-'98), 70hp ('91-95'), 75hp ('96-'98)
1111300101
HONDA®:
BF 4 stroke: 35, 40, 45, 50, 60hp, (not P60)
1211300200
MERCURY® & MARINER®:
2 stroke: 30hp ('94+) / 35, 45, 55/40, 50, 60 ('77+) / 70hp ('83-)
4 stroke: 25hp Bigfoot / 30hp ('94-'05) / 40hp to 60hp
1111300101
NISSAN® & TOHATSU®:
40C, 40D, 50D, 50C, 60A, 70A2, 60B, 70B
1311300300
PARSUN®:
T30, T35, T36, T40
1211300200
SUZUKI®:
DT 2 stroke ('89+): 35C, 40, 50, 50M, 55, 60, 65hp
DT 4 stroke: 40hp, 50hp / ('10+): 40A, 50A, 60A
1111300101
YAMAHA®:
2 stroke: 40hp to 55hp
4 stroke: FT25hp High Thrust, 30hp to 60hp
1211300200
$56.53
31722XL.jpg
Turning Point Propellers - Turning Point LE1/LE2-1315 Hustler® Aluminum - Right-Hand Propeller - 13.75 X 15 - 3-Blade (31722)
LE1/LE2-1315 Hustler® Aluminum Propeller

Size: 13-3/4 x 15 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

40-150hp Propellers w/ 4-1/4" Gearcase
Engine Brand - Various spline PROP shaftsHUBPART #
EVINRUDE® / JOHNSON®: (13 spline shaft)
2 cyl: 50hp ('71-'74) / 45 to 55hp commercial
3 cyl: 55, 60, 65, 70hp, 75hp with large gearcase, 65hp commercial
4 cyl: 75, 85, 88, 90, 100, 110, 115, 120 ('86-'94), 125, 135 ('73-'76), 140 ('77-'84, '86-'94) / H.O.: 115hp
E-TEC: 40, 50, 60, 75hp / 20" shaft: 90, 115hp, 130hp ('09-'10)
50311500300
EVINRUDE® / JOHNSON®: (13 spline shaft)
4 stroke: 60hp, 70hp
50611500600
FORCE®: (15 spline shaft)
75hp ('99) / 90hp to 150hp ('95&Newer)
50111500100
HONDA®: (15 spline shaft)
('95-'98): 75hp, 90hp
50111500100
HONDA®: (15 spline shaft)
P60 / 75hp, 90hp ('99+) / 115hp, 130hp, (not 115D)
50711500700
MERCURY® & MARINER®: (15 spline shaft)
2 and 4 stroke
40 to 60 Bigfoot / 70 ('87-'89) / 75, 80 ('78-'89), 90, 100, 115, 125, 140hp
150 XR4/6 (thru 1993, includes equivalet Mariner Magnum I, II, III.)
OptiMax: 75, 90, 115, 125hp
50111500100
NISSAN® & TOHATSU®: (15 spline shaft)
60C, 70C / 90 to 140hp
50511500500
OMC®: (13 spline shaft)
Cobra 400: 2.3 to 3.0L ('78-'89) / Sea Drive: 1.6 to 1.8L
50311500300
PARSUN®: (15 spline shaft)
T60, T75, T85, T90
50011500000
SUZUKI®: (13 spline shaft)
DT 2 Stroke ('89+): 75 to 140hp
DF 4 stroke ('89-'09): 60hp, 70hp
50611500600
YAMAHA®: (15 spline shaft)
High Thrust: T50, FT60
2 stroke: 60 to 100hp
4 stroke: 70 to 100hp
50011500000
YAMAHA®: (15 spline shaft)
2 stroke: 115 to 130hp
4 stroke: 115hp
50511500500


WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

$70.81
31723XL.jpg
Turning Point Propellers - Turning Point LE-1423 Hustler® Aluminum - Right-Hand Propeller - 14.25 X 23 - 3-Blade (31723)
LE-1423 Hustler® Aluminum Propeller

Size: 14-1/4 x 23 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

90-300+hp Propellers w/ 4-3/4" Gearcase
Engine Brand - 15 spline PROP shaftHUBPART #
EVINRUDE® / JOHNSON®:
V4 with V6 large gearcase: 100hp commercial, 120hp ('85), 130hp ('95-'96), 140hp ('85)
Pleasure ('95&newer): 115hp, 130hp / H.O.: 150, 200, 225, 250hp
E-TEC: (25" shaft) 90hp, 115hp, 130hp ('09-'10) / 135hp to 300hp
V6: 135hp to 250hp / V8: 250hp to 300hp
50211500200
HONDA®:
BF115D, BF135, BF150, BF200 ('02-'12), BF225 ('02-'12)
50711500700
HONDA®:
BF200 ('13&Newer), BF225 ('13&Newer), BF250 ('12&Newer)
50811500800
MERCURY® & MARINER®: Note: Does not fit Pro XS
V6 135 to 300hp / Verado 135 to 275hp.
OptiMax: 150, 200, 250hp
50111500100
MERCRUISER®:
Alpha One and Bravo One ('83&Newer)
50111500100
OMC®:
Cobra 800: 3.0 to 7.5L / King Cobra: 454, 502 / Sea Drive: 2.0 to 4.0L
50211500200
SUZUKI®:
DT 2 stroke: 150hp to 225hp
50711500700
VOLVO® PENTA SX & OMC SX COBRA: (19 spline)
('94&Newer): 3.0 to 8.2L
Not available for Volvo DuoProp or Aquamatic drives.
50411500400
YAMAHA®:
2 and 4 stroke: 150 to 250hp / stern drives 3.0 to 7.4L
50511500500

WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

$76.16
31724XL.jpg
Turning Point Propellers - Turning Point Hub Kit #502 (31724)
Turning Point Hub Kit: 502

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage
  • Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value.
  • Also adapts to all Michigan Wheel® and Mercury® interchangeable propellers

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$34.51
31725XL.jpg
Turning Point Propellers - Turning Point Hub Kit #504 (31725)
Turning Point Hub Kit: 504

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage
  • Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value.
  • Also adapts to all Michigan Wheel® and Mercury® interchangeable propellers

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$34.51
31726XL.jpg
Turning Point Propellers - Turning Point LE1/LE2-1317 Hustler® Aluminum - Right-Hand Propeller - 13.25 X 17 - 3-Blade (31726)
LE1/LE2-1317 Hustler® Aluminum Propeller

Size: 13-1/4 x 17 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

40-150hp Propellers w/ 4-1/4" Gearcase
Engine Brand - Various spline PROP shaftsHUBPART #
EVINRUDE® / JOHNSON®: (13 spline shaft)
2 cyl: 50hp ('71-'74) / 45 to 55hp commercial
3 cyl: 55, 60, 65, 70hp, 75hp with large gearcase, 65hp commercial
4 cyl: 75, 85, 88, 90, 100, 110, 115, 120 ('86-'94), 125, 135 ('73-'76), 140 ('77-'84, '86-'94) / H.O.: 115hp
E-TEC: 40, 50, 60, 75hp / 20" shaft: 90, 115hp, 130hp ('09-'10)
50311500300
EVINRUDE® / JOHNSON®: (13 spline shaft)
4 stroke: 60hp, 70hp
50611500600
FORCE®: (15 spline shaft)
75hp ('99) / 90hp to 150hp ('95&Newer)
50111500100
HONDA®: (15 spline shaft)
('95-'98): 75hp, 90hp
50111500100
HONDA®: (15 spline shaft)
P60 / 75hp, 90hp ('99+) / 115hp, 130hp, (not 115D)
50711500700
MERCURY® & MARINER®: (15 spline shaft)
2 and 4 stroke
40 to 60 Bigfoot / 70 ('87-'89) / 75, 80 ('78-'89), 90, 100, 115, 125, 140hp
150 XR4/6 (thru 1993, includes equivalet Mariner Magnum I, II, III.)
OptiMax: 75, 90, 115, 125hp
50111500100
NISSAN® & TOHATSU®: (15 spline shaft)
60C, 70C / 90 to 140hp
50511500500
OMC®: (13 spline shaft)
Cobra 400: 2.3 to 3.0L ('78-'89) / Sea Drive: 1.6 to 1.8L
50311500300
PARSUN®: (15 spline shaft)
T60, T75, T85, T90
50011500000
SUZUKI®: (13 spline shaft)
DT 2 Stroke ('89+): 75 to 140hp
DF 4 stroke ('89-'09): 60hp, 70hp
50611500600
YAMAHA®: (15 spline shaft)
High Thrust: T50, FT60
2 stroke: 60 to 100hp
4 stroke: 70 to 100hp
50011500000
YAMAHA®: (15 spline shaft)
2 stroke: 115 to 130hp
4 stroke: 115hp
50511500500


WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

$70.81
31727XL.jpg
Turning Point Propellers - Turning Point LE-1417 Hustler® Aluminum - Right-Hand Propeller - 14.25 X 17 - 3-Blade (31727)
LE-1417 Hustler® Aluminum Propeller

Size: 14-1/4 x 17 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish


90-300+hp Propellers w/ 4-3/4" Gearcase
Engine Brand - 15 spline PROP shaftHUBPART #
EVINRUDE® / JOHNSON®:
V4 with V6 large gearcase: 100hp commercial, 120hp ('85), 130hp ('95-'96), 140hp ('85)
Pleasure ('95&newer): 115hp, 130hp / H.O.: 150, 200, 225, 250hp
E-TEC: (25" shaft) 90hp, 115hp, 130hp ('09-'10) / 135hp to 300hp
V6: 135hp to 250hp / V8: 250hp to 300hp
50211500200
HONDA®:
BF115D, BF135, BF150, BF200 ('02-'12), BF225 ('02-'12)
50711500700
HONDA®:
BF200 ('13&Newer), BF225 ('13&Newer), BF250 ('12&Newer)
50811500800
MERCURY® & MARINER®: Note: Does not fit Pro XS
V6 135 to 300hp / Verado 135 to 275hp.
OptiMax: 150, 200, 250hp
50111500100
MERCRUISER®:
Alpha One and Bravo One ('83&Newer)
50111500100
OMC®:
Cobra 800: 3.0 to 7.5L / King Cobra: 454, 502 / Sea Drive: 2.0 to 4.0L
50211500200
SUZUKI®:
DT 2 stroke: 150hp to 225hp
50711500700
VOLVO® PENTA SX & OMC SX COBRA: (19 spline)
('94&Newer): 3.0 to 8.2L
Not available for Volvo DuoProp or Aquamatic drives.
50411500400
YAMAHA®:
2 and 4 stroke: 150 to 250hp / stern drives 3.0 to 7.4L
50511500500

WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Out of Stock
$76.16
31728XL.jpg
Turning Point Propellers - Turning Point LE-1419 Hustler® Aluminum - Right-Hand Propeller - 14.25 X 19 - 3-Blade (31728)
LE-1419 Hustler® Aluminum Propeller

Size: 14-1/4 x 19 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish


90-300+hp Propellers w/ 4-3/4" Gearcase
Engine Brand - 15 spline PROP shaftHUBPART #
EVINRUDE® / JOHNSON®:
V4 with V6 large gearcase: 100hp commercial, 120hp ('85), 130hp ('95-'96), 140hp ('85)
Pleasure ('95&newer): 115hp, 130hp / H.O.: 150, 200, 225, 250hp
E-TEC: (25" shaft) 90hp, 115hp, 130hp ('09-'10) / 135hp to 300hp
V6: 135hp to 250hp / V8: 250hp to 300hp
50211500200
HONDA®:
BF115D, BF135, BF150, BF200 ('02-'12), BF225 ('02-'12)
50711500700
HONDA®:
BF200 ('13&Newer), BF225 ('13&Newer), BF250 ('12&Newer)
50811500800
MERCURY® & MARINER®: Note: Does not fit Pro XS
V6 135 to 300hp / Verado 135 to 275hp.
OptiMax: 150, 200, 250hp
50111500100
MERCRUISER®:
Alpha One and Bravo One ('83&Newer)
50111500100
OMC®:
Cobra 800: 3.0 to 7.5L / King Cobra: 454, 502 / Sea Drive: 2.0 to 4.0L
50211500200
SUZUKI®:
DT 2 stroke: 150hp to 225hp
50711500700
VOLVO® PENTA SX & OMC SX COBRA: (19 spline)
('94&Newer): 3.0 to 8.2L
Not available for Volvo DuoProp or Aquamatic drives.
50411500400
YAMAHA®:
2 and 4 stroke: 150 to 250hp / stern drives 3.0 to 7.4L
50511500500

WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

$76.16
31729XL.jpg
Turning Point Propellers - Turning Point LE1421 Hustler® Aluminum - Right-Hand Propeller - 14.25 X 21 - 3-Blade (31729)
LE-1421 Hustler® Aluminum Propeller

Size: 14-1/4 x 21 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

90-300+hp Propellers w/ 4-3/4" Gearcase
Engine Brand - 15 spline PROP shaftHUBPART #
EVINRUDE® / JOHNSON®:
V4 with V6 large gearcase: 100hp commercial, 120hp ('85), 130hp ('95-'96), 140hp ('85)
Pleasure ('95&newer): 115hp, 130hp / H.O.: 150, 200, 225, 250hp
E-TEC: (25" shaft) 90hp, 115hp, 130hp ('09-'10) / 135hp to 300hp
V6: 135hp to 250hp / V8: 250hp to 300hp
50211500200
HONDA®:
BF115D, BF135, BF150, BF200 ('02-'12), BF225 ('02-'12)
50711500700
HONDA®:
BF200 ('13&Newer), BF225 ('13&Newer), BF250 ('12&Newer)
50811500800
MERCURY® & MARINER®: Note: Does not fit Pro XS
V6 135 to 300hp / Verado 135 to 275hp.
OptiMax: 150, 200, 250hp
50111500100
MERCRUISER®:
Alpha One and Bravo One ('83&Newer)
50111500100
OMC®:
Cobra 800: 3.0 to 7.5L / King Cobra: 454, 502 / Sea Drive: 2.0 to 4.0L
50211500200
SUZUKI®:
DT 2 stroke: 150hp to 225hp
50711500700
VOLVO® PENTA SX & OMC SX COBRA: (19 spline)
('94&Newer): 3.0 to 8.2L
Not available for Volvo DuoProp or Aquamatic drives.
50411500400
YAMAHA®:
2 and 4 stroke: 150 to 250hp / stern drives 3.0 to 7.4L
50511500500

WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

$76.16
31730XL.jpg
Turning Point Propellers - Turning Point Hub Kit #11 (31730)
Turning Point Hub Kit: 11

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$22.02
31731XL.jpg
Turning Point Propellers - Turning Point Hub Kit #12 (31731)
Turning Point Hub Kit: 12

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$22.02
31732XL.jpg
Turning Point Propellers - Turning Point Hub Kit #503 (31732)
Turning Point Hub Kit: 503

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage
  • Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value.
  • Also adapts to all Michigan Wheel® and Mercury® interchangeable propellers

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$34.51
31733XL.jpg
Turning Point Propellers - Turning Point Hub Kit #501 (31733)
Turning Point Hub Kit: 501

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage
  • Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value.
  • Also adapts to all Michigan Wheel® and Mercury® interchangeable propellers

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$34.51
32469XL.jpg
Turning Point Propellers - Turning Point Hub Kit #509 (32469)
Turning Point Hub Kit: 509

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage
  • Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value.
  • Also adapts to all Michigan Wheel® and Mercury® interchangeable propellers

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$36.89
32485XL.jpg
Turning Point Propellers - Turning Point Hub Kit #201 (32485)
Turning Point Hub Kit: 201

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$16.66
32486XL.jpg
Turning Point Propellers - Turning Point Hub Kit #26 (32486)
Turning Point Hub Kit: 26

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$17.67
32487XL.jpg
Turning Point Propellers - Turning Point Hub Kit #202 (32487)
Turning Point Hub Kit: 202

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$16.66
32488XL.jpg
Turning Point Propellers - Turning Point Hub Kit #205 (32488)
Turning Point Hub Kit: 205

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$16.66
32489XL.jpg
Turning Point Propellers - Turning Point Hub Kit #206 (32489)
Turning Point Hub Kit: 206

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$16.66
32490XL.jpg
Turning Point Propellers - Turning Point Hub Kit #207 (32490)
Turning Point Hub Kit: 207

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage
  • Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value.
  • Also adapts to all Michigan Wheel® and Mercury® interchangeable propellers

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$16.66
32491XL.jpg
Turning Point Propellers - Turning Point Hub Kit #208 (32491)
Turning Point Hub Kit: 208

Features

  • Lifetime Warranty
  • Never buy another hub kit system again
  • Inner splines adapt to the engine
  • Outer hub compatible with different props
  • Reduce gear shock & engine/drive damage
  • Save up to 30% when purchasing a replacement prop
  • Eliminate propeller vibration & chatter
  • Eliminate hub cracking & failure
  • Corrosion resistant materials - brass splines
  • Reduce gear shock & engine/drive damage
  • Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value.
  • Also adapts to all Michigan Wheel® and Mercury® interchangeable propellers

    WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$16.66
32492XL.jpg
Turning Point Propellers - Turning Point R3-1011 Hustler® Aluminum - Right-Hand Propeller - 10.5 X 11 - 3-Blade (32492)
R3-1011 Hustler® Aluminum Propeller

Size: 10-1/2 x 11 3-Blade

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.

Incorporating the newest and most efficient design features from high-performance stainless steel propellers, Hustler aluminum boat propellers run away from the competition. Hustler High Performance series propellers are the only aluminum propeller manufactured with performance enhancing vent holes. There's a Hustler propeller perfect for almost any boating application.

Features:

  • Performance Upgrade to OEM & Aftermarket Propellers
  • Squeeze Cast for Added Strength & Stainless Performance
  • Tuned Vents for Fast Hole Shot
  • Performance Tuned Rake and Progressive Pitch Angles
  • Improve Handling and Boat Lift
  • Long Lasting Finish

9.9 - 35 hp Propellers w/ 3" Gearcase
Engine Brand - 10 Spline PROP ShaftHUBPART #
EVINRUDE® / JOHNSON®:
4 stroke: 25hp, 30hp
2611200600
SUZUKI®:
DT 2 stroke ('87 & Newer): 20, 25, 25c, 30, 30c
DF 4 stroke: 25hp, 30hp
2611200600

WarningWARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

$49.98
Per Page      1 - 50 of 139