Trim Tab Accessories

Sort By:  
16219XL.jpg
Boat Leveler Co. - Boat Leveler Universal Motor (16219)
Universal Motor Pump

  • Pump has adjustable pressure relief valve set at 400psi.
  • Builit in bypass so fluid circulates so that pump will not stall.
  • Motor has thermal overload protection.
  • Includes all necessary fittings for a 12 volt single cylinder system.
  • Kit contains Biodegradable oil and funnel.
  • Heavy duty solenoid vales that lock cylinder in place.
  • 18" wire harness with color coding instructions for other brands.
  • Installation Instructions

$268.83
16220XL.jpg
Boat Leveler Co. - Boat Leveler Solenoid Valve - White Wires (16220)
Insta-Trim Boat Leveler 12 Volt Solenoid Valve with White Wire. They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type hose fittings provide tight, secure connections.
$62.48
16221XL.jpg
Boat Leveler Co. - Boat Leveler Solenoid Valve - Green Wires (16221)
Insta-Trim Boat Leveler 12 Volt Solenoid Valve with Green Wire. They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type hose fittings provide tight, secure connections.
Out of Stock
$62.48
16222XL.jpg
Boat Leveler Co. - Boat Leveler Oil & Funnel Kit (16222)
Biodegradable Oil & Funnel Kit

Biodegradable oil should be used only after motor pump is mounted to boat in vertical position, remove plug and add.

Funnel also included.
$12.50
16223XL.jpg
Boat Leveler Co. - Boat Leveler Hydraulic Hose - Sold By The Foot (16223)
Designed and manufactured exclusively for Insta-Trim with nylon-reinforced webbing and protective PVC coating. Rated at 2000 lb. burst pressure, 400lb working pressure. Entering the transom 6" above the water line, the hoses are held securely with hose trim. Stainless steel clamps hold the hose to barb fitting at the solenoid.
$3.46
16224XL.jpg
Boat Leveler Co. - Boat Leveler Hydraulic Cylinder (16224)
Impact resistant, fiberglass reinforced nylon cylinders eliminates expansion and resists ultra-violet rays. Two expanding type seals, plus O-ring, eliminates high and low pressure leaks. Barbed cylinder fitting and an inserted tubular rod prevents hose blow-off and breakage.

Cylinder is 7 1/2 inches eye to eye when closed.
$104.13
16225XL.jpg
Boat Leveler Co. - Boat Leveler Waterproof Trim Tab Switch (16225)
Waterproof Trim Tab Switch

  • Easily installed with a 1.5 inch hole saw
  • Adapt to other brands of trim tabs
  • Sealed between the switch and the dashboard
  • No interrupter relays available
  • Uses quick connect spade terminals for fast installation
  • Attractive design
  • Longer lasting than conventional "rocker switches"
$108.29
16227XL.jpg
Boat Leveler Co. - Boat Leveler Tab Locator - Black (16227)
Insta-Trim boat leveler's electronic tab locator shows the
position of your tabs. Two seperate lines of diode lamps
accurately indicate the position of each tab. the screen is
small, mounts on the dashboard, and is designed to
match your rocker type controls in size and appearance.
The detectors are rugged and attach easily and quickly to
each hydraulic cylinder. The attached readout line runs
up to the light panel with simple plug in connections.

Insta-Trim electonic tab locators can be added to your
existing boat leveler system, upgrading your system for a
better, more accurate performance.

Installation is quick, easy, and simple. Only a few
common tools are rquired, and the tab locators come
with easy to follow instructions.
Out of Stock
$312.38
16228XL.jpg
Boat Leveler Co. - Boat Leveler Tab Locator - White (16228)
Insta-Trim boat leveler's electronic tab locator shows the
position of your tabs. Two seperate lines of diode lamps
accurately indicate the position of each tab. the screen is
small, mounts on the dashboard, and is designed to
match your rocker type controls in size and appearance.
The detectors are rugged and attach easily and quickly to
each hydraulic cylinder. The attached readout line runs
up to the light panel with simple plug in connections.

Insta-Trim electonic tab locators can be added to your
existing boat leveler system, upgrading your system for a
better, more accurate performance.

Installation is quick, easy, and simple. Only a few
common tools are rquired, and the tab locators come
with easy to follow instructions.
$312.38
16897XL.jpg
Bennett Trim Tabs - Bennett ES2000 Euro Style Rocker Switch (16897)
Euro-Style Rocker Switch Control

This control is ergonomically designed, water resistant and provides a positive "click" when the trim tabs are engaged. Its lockout feature prevents user from pressing down on opposite directions at the same time. The control is easy to install, fitting into any existing Bennett 2 1/2-inch Rocker Switch hole.
$68.91
16898XL.jpg
Bennett Trim Tabs - Bennett ES2000A Euro Style Rocker Switch w/20' Wire Harness (16898)
Euro-Style Rocker Switch Control

This control is ergonomically designed, water resistant and provides a positive "click" when the trim tabs are engaged. Its lockout feature prevents user from pressing down on opposite directions at the same time. The control is easy to install, fitting into any existing Bennett 2 1/2-inch Rocker Switch hole.

Bridge control comes with a 20' wire harness
$92.13
16899XL.jpg
Bennett Trim Tabs - Bennett LS3000 Lock-Out Rocker Switch Control (16899)
Lock-Out Rocker Switch Control

This lock-out control is water resistant and provides a positive "click" when the trim tabs are engaged. The lock-out function prevents user from pressing down on opposite directions at the same time.
$61.42
16913XL.jpg
Bennett Trim Tabs - Bennett Trim Tabs Actuator Assembly - 13.75" Closed Length (16913)
Actuator Assembly - 13.75" Closed Length

Actuator assembly is complete hydraulic cylinder. Piston-like strong arm that pushes tab into position. Sophisticated plastic resin body. Nylon upper hinge. Bends 5° in actual use. Fluid flows through concealed hole in upper hinge thus eliminating external hoses subject to damage. Hearty and flexible enough to demands of offshore use. For use with Bennett standard trim tabs only.
$74.16
16914XL.jpg
Bennett Trim Tabs - Bennett A1101EX Actuator Assembly External Line (16914)
Attractive, compact, water resistant and easy to install. The TPI helm display accurately shows deflection percentage of each trim tab, and the LED brightness is adjustable for any lighting condition. Works with all Bennett Trim Tabs.

A1101EX is an external line connection actuator used in cases of total inaccessibility inside the transom. Unlike the standard actuator, the external line hydraulics enter the transom by means of external tubing above the waterline.
$74.16
16915XL.jpg
Bennett Trim Tabs - Bennett Upper Hinge A1103 (16915)
Upper Hinge

Bennett's A1103 Upper Hinge of the A1101 Actuator Assembly. Fluid throws through the upper hinge at the top of the actuator - thus eliminating external hoses subject to damange.
$14.23
16916XL.jpg
Bennett Trim Tabs - Bennett Upper Hinge A1103EX External Line (16916)
A1101EX is an external line connection actuator used in cases of total inaccessibility inside the transom. Unlike the standard actuator, the external hoses subject to damage.
$14.23
16923XL.jpg
Bennett Trim Tabs - Bennett A1200S Actuator Assembly (16923)
Bennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position. Fluid flows through a concealed hole in the upper hinge at the top of the actuator - thus eliminating external hoses subject to damage.

A1200S is designed for installations where space is limited.
$74.16
16924XL.jpg
Bennett Trim Tabs - Bennett A1200SRC Actuator Assembly f/ M80/M120 (16924)
Bennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position. Fluid flows through a concealed hole in the upper hinge at the top of the actuator - thus eliminating external hoses subject to damage.

A1200SRC: Actuator Assembly - Small Version for M80/M120 (w/ Rivet Clearance on Lower Hinge)
$74.16
16925XL.jpg
Bennett Trim Tabs - Bennett AR512 Auto Tab Retractor - 12V (16925)
Auto Tab Retractor

Automatically retracts tabs when boat?s ignition is turned off. Trailered or dry storage boats have added defense from trim tab damage with them "full-up" during hauling, trailering and storage. Ensures trim tabs are all the way up every time boat is started if boat is not equipped with trim tab indicators. Easily installed under the instrument panel, the ATR connects to the trim tab control and engine ignition switch.
Out of Stock
$59.92
16926XL.jpg
Bennett Trim Tabs - Bennett AR524 Auto Tab Retractor - 24v (16926)
Auto Tab Retractor

Automatically retracts tabs when boat's ignition is turned off. Trailered or dry storage boats have added defense from trim tab damage with them "full-up" during hauling, trailering and storage. Ensures trim tabs are all the way up every time boat is started if boat is not equipped with trim tab indicators. Easily installed under the instrument panel, the ATR connects to the trim tab control and engine ignition switch.
$59.92
16928XL.jpg
Bennett Trim Tabs - Bennett V351HPU1 Hydraulic Power Unit - 12V Pump (16928)
Hydraulic Power Unit

A compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance.

Measures 4" x 7 1/2" x 5 1/2". Uses automatic transmission fluid. Includes pump, solenoid valves, reservoir and cover.
$246.01
16929XL.jpg
Bennett Trim Tabs - Bennett V351HPU2 Hydraulic Power Unit - 24V Pump (16929)
Hydraulic Power Unit

A compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance. Installs easily with sturdy mounting bracket.

Measures 4" x 7 1/2" x 5 1/2". Uses automatic transmission fluid. Includes pump, solenoid valves, reservoir and cover.
Out of Stock
$286.87
16930XL.jpg
Bennett Trim Tabs - Bennett VP1135R Solenoid Valve - Red (16930)
Solenoid valves direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place.
$42.70
16931XL.jpg
Bennett Trim Tabs - Bennett VP1135G Solenoid Valve - Green (16931)
Solenoid valves direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place.
$42.70
29122XL.jpg
Lenco Marine - Lenco 101 Standard Actuator - 12V - 2-1/4" Stroke (29122)

101 Actuator- 12 Volt- 2-1/4  Stroke with Mounting Hardware

The 101 Actuator is used in all Standard, Edge Mount and Standard Performance kits. 2.25 stroke. Overall length (tip to top) is 12.5 inches.  Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing.


Specifications:

  • Newly implemented Anti Extrusion Ring (AXR) seal stabilization system.
  • Stronger top cap and mounting clevis design
  • Improved pressure-tight torx screws
  • Integrated wiper seal at actuator base
  • Molded-in brass thrust bearing design
  • Thicker and stronger motor housing wall
  • Improved O-Ring design for more consistent seal
  • Over-molded cable providing a stronger tighter seal
  • Upper mounting bracket with gland seal

Features:

  • Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics
  • Lenco's tough, high-torque actuator motor easily pushes 500 pounds.
  • Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion.
  • 12 Volt
  • 5/16" mounting hardware
  • 6 foot cable

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$188.33
29123XL.jpg
Lenco Marine - Lenco 101 Standard Actuator - 24V - 2-1/4" Stroke (29123)

101 Actuator- 24 Volt- 2-1/4  Stroke with Mounting Hardware

The 101 Actuator is used in all Standard, Edge Mount and Standard Performance kits. 2.25 stroke. Overall length (tip to top) is 12.5 inches.  Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing.


Specifications:

  • Newly implemented Anti Extrusion Ring (AXR) seal stabilization system.
  • Stronger top cap and mounting clevis design
  • Improved pressure-tight torx screws
  • Integrated wiper seal at actuator base
  • Molded-in brass thrust bearing design
  • Thicker and stronger motor housing wall
  • Improved O-Ring design for more consistent seal
  • Over-molded cable providing a stronger tighter seal
  • Upper mounting bracket with gland seal

Features:

  • Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics
  • Lenco's tough, high-torque actuator motor easily pushes 500 pounds.
  • Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion.
  • 24 Volt
  • 5/16" mounting hardware
  • 6 foot cable

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$231.73
29125XL.jpg
Lenco Marine - Lenco 101XD Extreme Duty Actuator - 12V - 2-1/4" Stroke - 5/16" Hardware (29125)

101 XD Actuator- 12 Volt- 2-1/4  Stroke with Mounting Hardware

The 101 XD Actuator is used mostly with HD, XD, High Performance and Super Strong tabs. 2.25 stroke. Overall length (tip to tip) is 113/8 inches.   Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing.


Specifications:

  • Newly implemented Anti Extrusion Ring (AXR) seal stabilization system.
  • Stronger top cap and mounting clevis design
  • Improved pressure-tight torx screws
  • Integrated wiper seal at actuator base
  • Molded-in brass thrust bearing design
  • Thicker and stronger motor housing wall
  • Improved O-Ring design for more consistent seal
  • Over-molded cable providing a stronger tighter seal
  • Upper mounting bracket with gland seal

Features:

  • Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics
  • Lenco's tough, high-torque actuator motor easily pushes 500 pounds.
  • Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion.
  • 12 Volt
  • 5/16" mounting hardware
  • 6 foot cable

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$232.44
29126XL.jpg
Lenco Marine - Lenco 101XD Extreme Duty Actuator - 12V - 2 1/4" Stroke - 3/8" Hardware (29126)

101 XD Actuator- 12 Volt- 2-1/4  Stroke with Mounting Hardware

The 101 XD Actuator is used mostly with HD, XD, High Performance and Super Strong tabs. 2.25 stroke. Overall length (tip to tip) is 113/8 inches.   Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing.


Specifications:

  • Newly implemented Anti Extrusion Ring (AXR) seal stabilization system.
  • Stronger top cap and mounting clevis design
  • Improved pressure-tight torx screws
  • Integrated wiper seal at actuator base
  • Molded-in brass thrust bearing design
  • Thicker and stronger motor housing wall
  • Improved O-Ring design for more consistent seal
  • Over-molded cable providing a stronger tighter seal
  • Upper mounting bracket with gland seal

Features:

  • Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics
  • Lenco's tough, high-torque actuator motor easily pushes 500 pounds.
  • Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion.
  • 12 Volt
  • 3/8" mounting hardware
  • 6 foot cable


WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$221.10
29128XL.jpg
Lenco Marine - Lenco 101XD Extreme Duty Actuator - 24V - 2-1/4" Stroke - 5/16" Hardware (29128)

101 XD Actuator- 24 Volt- 2-1/4  Stroke with Mounting Hardware

The 101 XD Actuator is used mostly with HD, XD, High Performance and Super Strong tabs. 2.25 stroke. Overall length (tip to tip) is 113/8 inches.   Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing.


Specifications:

  • Newly implemented Anti Extrusion Ring (AXR) seal stabilization system.
  • Stronger top cap and mounting clevis design
  • Improved pressure-tight torx screws
  • Integrated wiper seal at actuator base
  • Molded-in brass thrust bearing design
  • Thicker and stronger motor housing wall
  • Improved O-Ring design for more consistent seal
  • Over-molded cable providing a stronger tighter seal
  • Upper mounting bracket with gland seal

Features:

  • Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics
  • Lenco's tough, high-torque actuator motor easily pushes 500 pounds.
  • Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion.
  • 24 Volt
  • 5/16" mounting hardware
  • 6 foot cable

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$270.30
29129XL.jpg
Lenco Marine - Lenco 101XD Extreme Duty Actuator - 24v - 2 1/4" Stroke - 3/8" Hardware (29129)

101 XD Actuator- 24 Volt- 2-1/4  Stroke with Mounting Hardware

The 101 XD Actuator is used mostly with HD, XD, High Performance and Super Strong tabs. 2.25 stroke. Overall length (tip to tip) is 113/8 inches.   Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing.


Specifications:

  • Newly implemented Anti Extrusion Ring (AXR) seal stabilization system.
  • Stronger top cap and mounting clevis design
  • Improved pressure-tight torx screws
  • Integrated wiper seal at actuator base
  • Molded-in brass thrust bearing design
  • Thicker and stronger motor housing wall
  • Improved O-Ring design for more consistent seal
  • Over-molded cable providing a stronger tighter seal
  • Upper mounting bracket with gland seal

Features:

  • Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics
  • Lenco's tough, high-torque actuator motor easily pushes 500 pounds.
  • Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion.
  • 24 Volt
  • 3/8" mounting hardware
  • 6 foot cable

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$270.30
29133XL.jpg
Lenco Marine - Lenco 102 Series Standard Actuator - 12V - 4-1/4" Stroke (29133)

102 Series Standard Actuator - 12V - 4-1/4" Stroke w/Hardware

The 102 Actuator is used with Trolling Tab systems sold prior to 2000 and OEM applications. 4.25 stroke. Overall length (tip to tip) is 14 inches. Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing.


Specifications:

  • Newly implemented Anti Extrusion Ring (AXR) seal stabilization system.
  • Stronger top cap and mounting clevis design
  • Improved pressure-tight torx screws
  • Integrated wiper seal at actuator base
  • Molded-in brass thrust bearing design
  • Thicker and stronger motor housing wall
  • Improved O-Ring design for more consistent seal
  • Over-molded cable providing a stronger tighter seal
  • Upper mounting bracket with gland seal

Features:

  • Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics
  • Lenco's tough, high-torque actuator motor easily pushes 500 pounds.
  • Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion.
  • 12 Volt
  • 5/16" mounting hardware
  • 6 foot cable


WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$226.64
29135XL.jpg
Lenco Marine - Lenco 102XD Extreme Duty Actuator - 12V - 4-1/4" Stroke (29135)

102 XD Actuator- 12 Volt- 4-1/2  Stroke with Mounting Hardware

The 102 XD Actuator is used with Trolling Tab systems sold after 2000 and OEM applications. 4.25 stroke. Overall length (tip to tip) is 13 inches. Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing.


Specifications:

  • Newly implemented Anti Extrusion Ring (AXR) seal stabilization system.
  • Stronger top cap and mounting clevis design
  • Improved pressure-tight torx screws
  • Integrated wiper seal at actuator base
  • Molded-in brass thrust bearing design
  • Thicker and stronger motor housing wall
  • Improved O-Ring design for more consistent seal
  • Over-molded cable providing a stronger tighter seal
  • Upper mounting bracket with gland seal

Features:

  • Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics
  • Lenco's tough, high-torque actuator motor easily pushes 500 pounds.
  • Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion.
  • 12 Volt
  • 5/16" mounting hardware
  • 6 foot cable

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$250.07
29136XL.jpg
Lenco Marine - Lenco 102XD Extreme Duty Actuator - 24V - 4-1/4" Stroke - 5/16" Hardware (29136)

102 XD Actuator- 24 Volt- 4-1/2  Stroke with Mounting Hardware

The 102 XD Actuator is used with Trolling Tab systems sold after 2000 and OEM applications. 4.25 stroke. Overall length (tip to tip) is 13.25 inches. Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing.


Specifications:

  • Newly implemented Anti Extrusion Ring (AXR) seal stabilization system.
  • Stronger top cap and mounting clevis design
  • Improved pressure-tight torx screws
  • Integrated wiper seal at actuator base
  • Molded-in brass thrust bearing design
  • Thicker and stronger motor housing wall
  • Improved O-Ring design for more consistent seal
  • Over-molded cable providing a stronger tighter seal
  • Upper mounting bracket with gland seal

Features:

  • Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics
  • Lenco's tough, high-torque actuator motor easily pushes 500 pounds.
  • Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion.
  • 24 Volt
  • 5/16" mounting hardware
  • 6 foot cable

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$292.13
29137XL.jpg
Lenco Marine - Lenco Upper Mounting Bracket w/Gland Seal (2008-Present) (29137)

Standard Upper Mounting Bracket w/Gland Seal 

 VANDAR - (3 screw, 1 wire) (2008-Present)

Specifications

  • Lenco Part #: 15085-001 (Original Part #116)
  • System Type: Single or Dual Actuator
  • Compatibility: Any Boat

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$10.01
29138XL.jpg
Lenco Marine - Lenco Compact Upper Mounting Bracket - 2 Screws 1 Wire (29138)

Compact Upper Bracket 

VANDAR - (2 screw, 1 wire) (Used in applications with limited space)

Specifications

  • Lenco Part #: 50225-001D (Original Part #117)
  • System Type: Single or Dual Actuator
  • Compatibility: Any Boat

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$10.56
29139XL.jpg
Lenco Marine - Lenco Standard Upper Mounting Bracket - 3 Screws 1 Wire (29139)

Standard Upper Mounting Bracket 

3 screw, 1 wire (THRU 2007)

Standard Upper Mounting Bracket with a Gland Seal that slides over the actuator wires to seal the new mounting bracket to the transom. 

Specifications

  • Lenco Part #: 50015-001D (Original Part #118)
  • System Type: Single or Dual Actuator
  • Compatibility: Any Boat

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$9.51
29140XL.jpg
Lenco Marine - Lenco 7 Degree Mounting Shim f/118 & 119 Mounting Brackets (29140)

7 Degree Mounting Shim 

For Upper # 50015-001D(118) & Lower # 50014-001D(119) Mounting Bracket.

Specifications

  • Lenco Part #: 50015-002D
  • System Type: Single or Dual Actuator
  • Compatibility: Any Boat

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$9.51
29141XL.jpg
Lenco Marine - Lenco Standard Lower Mounting Bracket - 3 Bolt (29141)

Standard Lower Mounting Bracket (3 bolt) - VANDAR

Specifications

  • Lenco Part #: 50014-001D (Original Part #119)
  • System Type: Single or Dual Actuator
  • Compatibility: Any Boat

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$9.51
29143XL.jpg
Lenco Marine - Lenco 2 Delrin Mounting Pins f/101 & 102 Actuator (Pack of 2) (29143)

Delrin Mounting Pin for 101 & 102 Actuator (1.5") - Pack of 2.

Specifications

  • Lenco Part #: 15087-001 (Pack of Two)
  • System Type: Single or Dual Actuator
  • Compatibility: Any Boat

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$7.59
29170XL.jpg
Lenco Marine - Lenco Standard 9" x 9" Single - 12 Gauge Replacement Blade (29170)
Standard 9" x 9" Single - 12 Gauge Replacement Blade

  • Gauge: 12
  • Anode:No
  • Back Plate:No

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$87.32
29172XL.jpg
Lenco Marine - Lenco Edgemount 9" x 9" Single - 12 Gauge Replacement Blade (29172)
Edgemount 9" x 9" Single - 12 Gauge Replacement Blade

  • Gauge:12
  • Anode: No
  • Back Plate: No

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$98.97
29173XL.jpg
Lenco Marine - Lenco Standard 9" x 12" Single - 12 Gauge Replacement Blade (29173)
Standard 9" x 12" Single - 12 Gauge Replacement Blade

  • Gauge:12
  • Anode: No
  • Back Plate: No

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$93.87
29175XL.jpg
Lenco Marine - Lenco Edgemount 9" x 12" Single - 12 Gauge Replacement Blade (29175)
Edgemount 9" x 12" Single - 12 Gauge Replacement Blade

  • Gauge:12
  • Anode: No
  • Back Plate: No

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$100.44
29176XL.jpg
Lenco Marine - Lenco Standard 9" x 18" Single - 12 Gauge Replacement Blade (29176)
Standard 9" x 18" Single - 12 Gauge Replacement Blade

  • Gauge:12
  • Anode: No
  • Back Plate: No

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$117.88
29177XL.jpg
Lenco Marine - Lenco Standard 9" x 24" Single - 12 Gauge Replacement Blade (29177)
Standard 9" x 24" Single - 12 Gauge Replacement Blade

  • Gauge:12
  • Anode: No
  • Back Plate: No

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$130.89
29178XL.jpg
Lenco Marine - Lenco Standard 9" x 30" Single - 12 Gauge Replacement Blade (29178)
Standard 9" x 30" Single - 12 Gauge Replacement Blade

  • Gauge:12
  • Anode: No
  • Back Plate: No

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$211.77
Per Page      1 - 50 of 178