Windlasses

Sort By:  
15204XL.jpg
$29.36
$21.75
ADD TO CARTShips next business dayView more
13172XL.jpg
Maxwell - Maxwell P19007 Covered Footswitch (White) (13172)
FOOTSWITCH

Maxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws.

  • Rated at 200 amps and suitable for 12V or 24V applications.
  • Nickel-plated copper contacts ensure corrosion-free reliable operation
  • UV stabilized plastic
Out of Stock
$48.73
13173XL.jpg
Maxwell - Maxwell P19001 Footswitch (Chrome Bezel) (13173)
FOOTSWITCHES

Maxwell heavy-duty, weather resistant units have a UV stabilized waterproof diaphragm and are supplied complete with mounting instructions and screws.

  • Rated at 200 amps and suitable for 12V or 24V applications.
  • Nickel-plated copper contacts ensure corrosion-free reliable operation
$48.73
13174XL.jpg
Maxwell - Maxwell P19006 Covered Footswitch (Black) (13174)
FOOTSWITCH

Maxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws.

  • Rated at 200 amps and suitable for 12V or 24V applications.
  • Nickel-plated copper contacts ensure corrosion-free reliable operation
  • One foot switch supplied standard with each winch (except Freedom, Liberty and hydraulic units).
  • UV stabilized plastic
$48.73
13856XL.jpg
Maxwell - Maxwell Remote Up/ Down Control (13856)
REMOTE UP/DOWN CONTROL

Easy to use panel-mounted Up/Down switch for remote windlass operation from the helm, flying bridge or cockpit. Available for use with dual-directional solenoids.

  • Manufactured from marine-grade materials.
  • Splash proof.
  • Suitable for use with DC 12V or 24V dual-directional solenoids.
Out of Stock
$42.47
14941XL.jpg
Maxwell - Maxwell ANCHORMAX™ Windlass (14941)
ANCHORMAX™ Windlass

Features:
  • Has an extremely high power to weight ratio
  • ompact, fully sealed gearbox is driven by a vertically mounted, permanent magnet motor
  • Intrusion below decks is minimised making the design ideal for boats from 5m (16ft) to 10m (32ft)
  • Fitting to the boat is simplicity itself as no dismantling of the winch is required
  • Gear housings are marine-grade alloy and the drum is stainless steel
  • Supplied as a single direction (clockwise) unit, complete with deck switch, fastenings, template and fitting instructions
  • Not recommended for use to haul halyards
  • Not recommended for use to haul chain



Note: Each winch is supplied as a single direction (clockwise) fully tested unit complete with fitting instructions, deck switch, templates and fastenings.

STANDARD EQUIPMENT
  • Footswitch



SPECIFICATIONS
Maximum Line Pull386kg (850lb)
Speed @ nominal working load24m/min (76ft per min) (80 amps with 100kg/220lb load)
Voltage12v
Power600w
Weight8kg(17.6lb)
Maximum Boat Load10m (33ft)
Max. Boat Weight4 Tons
Out of Stock
$691.74
15198XL.jpg
Quick - Quick HRC1002 2 Button Remote Control (15198)
HRC1002

Multipurpose watertight hand held remote control 2 Button.

HRC is the new Quick range of multipurpose hand-held remote controls, designed to for remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with a connecting cable extensible up to 4.2 metres, a watertight deck plug and socket, and a support bracket for stowing after use.
Out of Stock
$112.50
15199XL.jpg
Quick - Quick HRC1004 4 Button Remote Control (15199)
HRC1004

Multipurpose watertight hand held remote control 4 Button.

HRC is the new Quick range of multipurpose hand-held remote controls,
designed to for remote operation of various on-board electrically operated
equipment such as cranes, gangways, windlasses, sea ladders etc. HRC is
constructed with rubber inserts to ensure high strength, long durability,
perfect watertightness, and a secure grip. HRC remote controls are supplied
complete with a connecting cable extensible up to 4.2 metres, a watertight
deck plug and socket, and a support bracket for stowing after use.


$172.50
15203XL.jpg
Quick - Quick 800 Windlass Control Panel (15203)
Windlass Control Panel

2" W x 2.3" H x 1.1"D (W 50 x H 87 x D 28 mm)
$23.25
15204XL.jpg
Quick - Quick 900 Anchor Up Foot Switch (15204)
Footswitch

Safety cover prevents accidental operation.
$21.75
16210XL.jpg
Quick - Quick 900 Anchor Down Foot Switch, Black (16210)
Footswitch

Safety cover prevents accidental operation.
$21.75
16600XL.jpg
Powerwinch - Powerwinch Class 46' Automatic Helm-Operated Free-Fall Windlass (16600)
Class 46'

Automatic Helm-Operated Free-Fall Windlass

The Safest Way to Anchor!



  • Free-Fall System anchors up to 300'/min - Up to four times faster than powering down
  • Exclusive stainless steel rope & chain guidance system - Durable materials stand up to years of use
  • Ultra smooth motor uses less amps - Free-fall does not need battery power so it preserves your battery
  • Built with durable stainless steel fasteners - Resists corrosion for easy removal
  • Watertight seals - For additional protection against corrosion
  • One piece motor plate - For smooth power transmission & improved gear life
  • Heat treated oil-impregnated gear systems -Smoother operation, resists corrosion, lasts longer
  • Stainless steel drive shafts - For years of smooth, reliable performance
  • Replaceable Rode-Glide - Smoothly channels rope and chain below deck
  • Use tapered back splice - For smooth rope-to-chain transition
$863.75
16601XL.jpg
Powerwinch - Powerwinch Class 41' Automatic Helm-Operated Free-Fall Windlass (16601)
Class 41'

Automatic Helm-Operated Free-Fall Windlass

The Safest Way to Anchor!



  • Free-Fall System anchors up to 300'/min - Up to four times faster than powering down
  • Exclusive stainless steel rope & chain guidance system - Durable materials stand up to years of use
  • Ultra smooth motor uses less amps - Free-fall does not need battery power so it preserves your battery
  • Built with durable stainless steel fasteners - Resists corrosion for easy removal
  • Watertight seals - For additional protection against corrosion
  • One piece motor plate - For smooth power transmission & improved gear life
  • Heat treated oil-impregnated gear systems -Smoother operation, resists corrosion, lasts longer
  • Stainless steel drive shafts - For years of smooth, reliable performance
  • Replaceable Rode-Glide - Smoothly channels rope and chain below deck
  • Use tapered back splice - For smooth rope-to-chain transition
$734.18
16602XL.jpg
Powerwinch - Powerwinch Class 36' Automatic Helm-Operated Free-Fall Windlass (16602)
Class 36'

Automatic Helm-Operated Free-Fall Windlass

The Safest Way to Anchor!



  • Free-Fall System anchors up to 300'/min - Up to four times faster than powering down
  • Exclusive stainless steel rope & chain guidance system - Durable materials stand up to years of use
  • Ultra smooth motor uses less amps - Free-fall does not need battery power so it preserves your battery
  • Built with durable stainless steel fasteners - Resists corrosion for easy removal
  • Watertight seals - For additional protection against corrosion
  • One piece motor plate - For smooth power transmission & improved gear life
  • Heat treated oil-impregnated gear systems -Smoother operation, resists corrosion, lasts longer
  • Stainless steel drive shafts - For years of smooth, reliable performance
  • Replaceable Rode-Glide - Smoothly channels rope and chain below deck
  • Use tapered back splice - For smooth rope-to-chain transition
$763.00
16604XL.jpg
Powerwinch - Powerwinch Sport Fish 450, Free-Fall Anchor Windlass (16604)
Free-Fall Anchor Windlass
Part #: P777727

Automatic Helm-Operated Free-Fall Windlass For The Safest Way To Anchor!

Benefits of Free-Fall over Power-Down:
  • Free-Fall System anchors up to 300'/min - Up to four times faster than powering down
  • Exclusive stainless steel rope & chain guidance system - Durable materials stand up to years of use
  • Ultra smooth motor uses less amps - Free-fall does not need battery power so it preserves your battery
  • Built with durable stainless steel fasteners - Resists corrosion for easy removal
  • Watertight seals - For additional protection against corrosion
  • One piece motor plate - For smooth power transmission & improved gear life
  • Heat treated oil-impregnated gear systems -Smoother operation, resists corrosion, lasts longer
  • Stainless steel drive shafts - For years of smooth, reliable performance
  • Replaceable Rode-Glide - Smoothly channels rope and chain below deck
  • Use tapered back splice - For smooth rope-to-chain transition
$643.00
16610XL.jpg
Powerwinch - Powerwinch Capstan 300 (16610)
Capstan 300
Part #: P77726

Versatile rope winch for anchoring, sailing & fishing

The Capstan 300 is a smaller power assisted rope capstan for a variety of uses. It has a maximum pull of 300 lbs with a retrieval speed of 85 feet per minute. Whether anchoring, sailing, or fishing, let the Capstan 300 help spare your back, speed up your retrieval process, and make your boating more pleasurable.

Features:
  • Strong pulling power of 300 lbs
  • Quick retrieval speed of 85 ft/minute
  • Deck mounted design - saves space for rope locker
  • Easy to operate footswitch (included)
  • Handles unlimited rope lengths
  • All aluminum housing with a durable polyester paint finish
  • Stainless steel internal shafts, fasteners, & hardware
$619.01
16755XL.jpg
Powerwinch - Powerwinch Capstan 1000 Winch (16755)
Capstans

Why Capstans?
Rather than using the hand-over-hand method of retrieving lines, the capstan offers a mechanical advantage that is both faster and safer. The capstan does the heavy lifting with only a small amount of effort. The maximum speed of the line retrieval depends on the rotational speed of the drum. The benefit is that the retrieval speed can be adjusted by decreasing the tension on the retrieved line, maintaining control over a very heavy load with little effort.
This useful device, which has been around since the early days of sailing, is still used today. Recreational fishermen, like commercial fishermen, use these for hauling crab and lobster pots and there are many other uses aboard boats. The few mechanical parts and ease of use have made this a favorite of fisherman worldwide. While chains should NEVER be wrapped around a drum, the majority of lines can be handled on a capstan.

A capstan, typically operated by an easy to use footswitch (R001459), allows the boater to control lines with ease without having additional crew members. Powerwinch has a model to fit your needs. All Powerwinch capstans come with a foot control switch that allows for hands-free operation.

Capstan 1000
Multi-purpose rope winch for anchoring, sailing & Fishing
1000 pounds of pulling power!
Our largest capstan, the Capstan 1000, is a power assisted rope capstan for larger applications with 1000 pound pull power and 40 ft/minute retrieval speed. A great tool for quick retrieval lobster, prawn and crab pots. The Capstan 100 also provides power assist for limited crew sailboats and power assisted anchor retrieval. Uses up to 3/4" diameter rope.

  • Fast 40'/min retrieval speed
  • 1000 lb max pulling power
  • Handles unlimited rope lengths
  • Easy to operate footswitch (included)
  • All aluminum housing with a durable polyester finish
  • Thermal automatic resetting circuit breaker
  • One piece, heat-treated and oil-impregnated gears
  • Stainless steel internal shafts, fasteners, and hardware
  • Two year limited warranty
$748.58
25449XL.jpg
Minn Kota - Minn Kota Deckhand™ 25 (25449)
DeckHand™ 25
#1810125

The DeckHand 25 has a 25-lb anchor capacity (anchor not included). Includes davit for stowing most styles of anchors. Pre-spooled with 60 feet of 800-lb test nylon rope. Runs on 12-volt battery (not included). Get precision boat placement and the ability to stay on the fish as long as you want with a DeckHand™ electric anchor winch. It automatically raises or lowers your anchor at the touch of a button, and its special anti-drag system senses the bottom to allow for controlled drifting.

Features
  • 25-lb anchor capacity (anchor not included)
  • Pre-spooled with 60 feet of 800-lb test nylon rope
  • Davit can be mounted at base of DeckHand or in remote position on deck
  • Davit stows most kinds of anchors
  • Stow and deploy switch integrated into the base of the unit
  • Auto-drift feature automatically stops the motor when the anchor touches bottom (or hits an obstacle); when slack in teh rope becomes tight, rope is automatically released; lock the winch with the touch of a button
  • Consistent hold pattern with older DeckHand models (DH-18, DH-20, DH-35)
  • Includes: remote mountable anchor davit

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$180.17
30089XL.jpg
Maxwell - Maxwell Freedom Pressure Arm Upgrade Kit (30089)
Pressure Arm Upgrade Kit

Made specifically for Maxwell's Freedom Series of Windlasses.
$19.11
30092XL.jpg
Maxwell - Maxwell AA560 Rope Chain or All Chain Counter Control - Black (30092)
Maxwell AA560
Panel Mount Windlass Controller and Rode Counter

  • Preset stopping point on retrieval
  • One-touch function to deploy and retrieve a preset length of rode
  • Adjustable back lit display in feet, metres or fathoms
  • Graphic LCD screen featuring intuitive user interface for simple operation
  • Displays windlass speed and direction, plus battery voltage
  • Safety lock to help protect against accidental windlass deployment
  • Logs windlass operation hours to help ensure regular windlass maintenance
$651.88
30647XL.jpg
Minn Kota - Minn Kota DeckHand™ 40 (30647)
DeckHand™ 40

  • 20- to 40-pound anchor capacity (anchor not included).
  • Pre-spooled with 100 feet of 800-lb test rope.
  • Auto-drift feature automatically stops the motor when the anchor touches bottom (or hits an obstacle); when slack in the rope becomes tight, rope is automatically released; lock the winch with the touch of a button.
  • Universal davit can be mounted at base of DeckHand™ or in remote position on boat deck; stows anchor horizontally to eliminate anchor swing.
  • Anchor shackle allows for easy changeover from anchor to anchor.
  • Stow and deploy switch integrated into the base of the unit.
  • Corded remote stow and deploy switch (sold separately) allows operation of DH-40 from anywhere on the boat.
  • Compatible with MKA-16-02 quick release bracket ideal for easy removal for boat cover clearance or clearing the deck during non-use (requires holes to be drilled in top plate of quick release bracket).
  • 12-volt battery operation.

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$245.69
31304XL.jpg
Maxwell - Maxwell RC10/8 12V Automatic Rope Chain Windlass 5/16" Chain to 5/8" Rope (31304)
RC10 Automatic Rope/Chain Windlass

  • Designed for 5/16" chain and 5/8" rope combination
  • Maximum pull: 1540 lbs
  • Metric Chain Size: 8mm
  • Motor Wattage: 1000W
  • Innovative heavy duty stainless steel pressure arm, coupled with a unique rope/chain gypsy, giving an unparalleled level of performance.
  • Simple two piece installation, saving time and money and allowing easy retrofitting without disassembly of the windlass.
  • Manufactured from marine grade chromed bronze for long term durability
  • The topworks can be fully disassembled utilizing the handle provided, a screw driver and common allen key, making regular service and maintenance a breeze. No special tools required!
  • A huge, through deck, hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker
  • Not only does the RC10 effortlessly handle combination rope/chain rodes, it works just as well with all chain rodes for those who may want the extra security of an all chain systems combined with an elegantly styled, low profile windlass on their foredeck.
  • Exclusive Maxwell 3 Year Limited Warranty ensuring your confidence that you are getting the best product on the market.
$2,116.50
31305XL.jpg
Maxwell - Maxwell RC10/10 12V Automatic Rope Chain Windlass 3/8" Chain to 5/8" Rope (31305)
RC10 Automatic Rope/Chain Windlass

  • Designed for 3/8" chain and 5/8" rope combination
  • Maximum Pull: 1870lbs.
  • Metric chain size: 10mm
  • Motor Wattage: 1200W
  • Innovative heavy duty stainless steel pressure arm, coupled with a unique rope/chain gypsy, giving an unparalleled level of performance.
  • Simple two piece installation, saving time and money and allowing easy retrofitting without disassembly of the windlass.
  • Manufactured from marine grade chromed bronze for long term durability
  • The topworks can be fully disassembled utilizing the handle provided, a screw driver and common allen key, making regular service and maintenance a breeze. No special tools required!
  • A huge, through deck, hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker
  • Not only does the RC10 effortlessly handle combination rope/chain rodes, it works just as well with all chain rodes for those who may want the extra security of an all chain systems combined with an elegantly styled, low profile windlass on their foredeck.
  • Exclusive Maxwell 3 Year Limited Warranty ensuring your confidence that you are getting the best product on the market.
Out of Stock
$2,179.13
32001XL.jpg
Maxwell - Maxwell AA150 Chain & Rope Counter (32001)
Rode Counter

Auto Anchor 150 - panel mount rode counter for electric or hydraulic windlasses using all-chain or rope/chain rode.

  • Rode length monitoring from the helm.
  • Large LCD display with adjustable red back lighting shows length of anchor rode deployed.
  • Display in feet or metres.
  • Docking alarm warns skipper when anchor is close to docking.
  • Easy set up with pre-programmed calibrations for rope/chain ropes.
  • Install one or more units or combine with the AA550RC, AA500C or AA601 for multiple stations.
  • Works on 12 or 24V DC.
  • Standard 60mm (2.36) marine instrument console.
$433.40
32570XL.jpg
Minn Kota - Minn Kota Deckhand 40 Remote Switch (32570)
Deckhand 40 Remote Switch

25' cord allows you to operate the DeckHand 40 from anywhere on the boat

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$43.22
36523XL.jpg
Maxwell - Maxwell Stripper Arm Kit f/Freedom 500 (36523)
Stripper Arm Kit For Freedom 500

Trouble free transition from rope to chain by means of an innovative pressure arm system within a safer enclosed design.
$19.11
36524XL.jpg
Maxwell - Maxwell Stripper Arm Kit f/Freedom 800 (36524)
Stripper Arm Kit For Freedom 800

Trouble free transition from rope to chain by means of an innovative pressure arm system within a safer enclosed design.

Out of Stock
$19.11
36957XL.jpg
Minn Kota - Minn Kota Deckhand 25R w/Corded Remote (36957)
Get precision boat placement and the ability to stay on the fish as long as you want with a DeckHand electric anchor winch. It automatically raises or lowers your anchor at the touch of a button, and its special anti-drag system senses the bottom to allow for controlled drifting.

Each standard DeckHand model runs on a 12-volt battery (not included) and features a 2-year warranty.

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$221.11
37378XL.jpg
Maxwell - Maxwell RC6 12V Windlass - 500W f/1/4 Chain to 1/2 Rope (37378)
  • The RC6 utilizes 6mm/7mm (1/4") chain spliced to 12mm (1/2") three strand or 8-plait rope.
  • Maximum Pull: 660lbs.
  • Providing most of the features of the larger RC8, the RC6 has been designed with the smaller, trailer boat market in mind.
  • The in-line, vertical gearbox and motor means quick and easy installation by either the boat yard or the DIY aftermarket customer.
  • An inexpensive, high performance and great looking windlass: the RC6 is built for durability and years of trouble free use.
  • The RC6 is available only as a low profile unit (no optional capstan drum).

    Kits include:windlass , an on/off breaker panel, a reversing soleniod, an up/down panel switch and a handle.
$901.13
37379XL.jpg
Maxwell - Maxwell RC8-8 12V Windlass - 1000W 5/16 Chain to 9/16 Rope (37379)

  • Maximum Pull: 1320lbs
  • The larger RC8-8 can be used with 8mm (5/16") chain spliced to 14mm (9/16") three strand or 8-plait rope.
  • The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series.
  • Sleek, low profile and MAX-grip capstan drum versions are available to suit individual user preference.
  • Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass.
  • Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations.
  • Full disassembly capability of top works utilizing handle provided, a screw driver and an Allen key.
  • The RC8 Series is manufactured from marine grade 316 stainless steel for long term durability. The heavy duty stainless steel pressure arm is designed to effectively help grasp the rope/chain splice, giving the RC8 an unparalleled level of performance.
  • In combination with a heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm always exerts maximum control pressure.
  • The RC8 works just as effectively with all-chain rodes for those who desire a low profile, elegantly styled windlass on their foredeck.
  • Huge through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker.
  • Cone type clutch/brake mechanism permits manual, free fall anchoring.
  • Manual override using the emergency crank handle provided
  • Sealed oil bath and marine grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and worm wheel.
  • Kits include: windlass , an on/off breaker panel, a reversing soleniod, an up/down panel switch and a handle.
$1,544.44
41166XL.jpg
Maxwell - Maxwell HRC6 12V Horizontal Freefall Rope/Chain Series 1/4" Chain 1/2" Rope (41166)
The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC6 and HRC8 are packed with original and proven features including rode management technology developed by Maxwell.

HRC6
  • Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up.
  • Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design.
  • Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation.
  • High efficiency spur gearbox incorporating a robust non-backwind mechanism.
  • High speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch.
  • Emergency "free fall" function in the event of onboard power failure.
  • Revolutionary new chainwheel - see over.
  • Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation, is easily removed for simple routine electric brush maintenance.
  • Now incorporating Maxwell's automatic free-fall technology. Simply activate the windlass 'free fall' lever, operate your down control (helm station or footswitch) and the windlass will freefall your anchor. Ready to lift the anchor? Activate the up control and the 'free fall' device automatically disengages allowing you to power up your anchor.
  • Aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case, saving space below deck and allowing simple routine maintenance.
  • Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection.


Specifications
Model: HRC6
Maximum Pull: 600lbs
Chain Short Link: 1/4"
Rope Size (Nylon): 1/2"
Line Speed(Anchor Retrieval): 108'/min
Power Supply(DC): 12V or 24V
Motor Power: 400W
Net Weight: 25lbs
$1,067.25
41167XL.jpg
Maxwell - Maxwell HRC8 12V Horizontal Freefall Rope/Chain Series 5/16" Chain 9/16" Min Rope (41167)
The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC6 and HRC8 are packed with original and proven features including rode management technology developed by Maxwell.

HRC8
  • Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up.
  • Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design.
  • Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation.
  • High efficiency spur gearbox incorporating a robust non-backwind mechanism.
  • High speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch.
  • Emergency "free fall" function in the event of onboard power failure.
  • Revolutionary new chainwheel - see over.
  • Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation, is easily removed for simple routine electric brush maintenance.
  • Now incorporating Maxwell's automatic free-fall technology. Simply activate the windlass 'free fall' lever, operate your down control (helm station or footswitch) and the windlass will freefall your anchor. Ready to lift the anchor? Activate the up control and the 'free fall' device automatically disengages allowing you to power up your anchor.
  • Aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case, saving space below deck and allowing simple routine maintenance.
  • Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection.
  • Kits include:windlass, on/off breaker panel, reversing soleniod, up/down panel switch, a clutch release handle.


Specifications
Model: HRC8
Maximum Pull: 900lbs
Chain Short Link: 5/16"
Rope Size (Nylon): 9/16"
Line Speed(Anchor Retrieval): 108'/min
Power Supply(DC): 12V
Motor Power: 600W
Net Weight: 25lbs
$1,067.25
41655XL.jpg
Maxwell - Maxwell HRC10 Horizontal Rope Chain Windlass - 12V Capstan 3/8" Chain, 5/8" Rope (41655)
HRC10 Horizontal Rope Chain Windlass - 12V Capstan 3/8" Chain, 5/8" Rope

Maxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully automatic rope/chain windlasses has been designed to meet the demands for use on larger vessels up to 16 meters (52'), which require a completely above deck installation system.

The HRC10 handles 5/8" rope and 3/8" chain, including the thick rope to chain splice. The modern appearance of the HRC10 retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.

The HRC10 windlass is fitted with Maxwell's unique Wave Design™ chainwheel. The rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.

As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode.

Features:
  • Aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck
  • 2-part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section
  • 2-piece watertight case allows for quick and easy, on-deck, routine maintenance
  • Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up
  • Stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain)
  • Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10
  • Unique Maxwell "wrap around"™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs
  • Works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system
  • The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker
  • Cone type clutch/brake mechanism permits manual, "free fall"™ anchoring and emergency crank recovery of the rode and anchor if required
  • The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel
$2,586.94
41656XL.jpg
Maxwell - Maxwell HRC10 Horizontal Rope Chain Windlass - 12V No Capstan 3/8" Chain, 5/8" Rope (41656)
HRC10 Horizontal Rope Chain Windlass - 12V No Capstan 3/8" Chain, 5/8" Rope

Maxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully automatic rope/chain windlass has been designed to meet the demands for use on larger vessels up to 16 meters (52'), which require a completely above deck installation system.

The HRC10 handles 5/8" rope and 3/8" chain, including the thick rope to chain splice. The modern appearance of the HRC10 retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.

The HRC10 windlass is fitted with Maxwell's unique Wave Design™ chainwheel. The rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.

As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode.

Features:
  • Aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck
  • 2-part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section
  • 2-piece watertight case allows for quick and easy, on-deck, routine maintenance
  • Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up
  • Stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain)
  • Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters
  • Unique Maxwell "wrap around"™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs
  • The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system
  • The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker
  • Cone type clutch/brake mechanism permits manual, "free fall"™ anchoring and emergency crank recovery of the rode and anchor if required
    =
  • The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel
Out of Stock
$2,586.94
41657XL.jpg
Maxwell - Maxwell Compact Wireless Remote Controller (41657)
COMPACT WIRELESS REMOTE WINDLASS CONTROLLER

This radio controller may be used for remote operation of Maxwell anchor windlasses. Complete with receiver, remote and lanyard it is suitable for direct connection to all windlasses. Additional wiring for operation of Maxwell hydraulic windlasses is available as an extra.
$205.45
41660XL.jpg
Maxwell - Maxwell Wireless Remote Handheld w/Rode Counter (41660)
MAXWELL AA710
WIRELESS, HAND HELD REMOTE WINDLASS CONTROLLER AND RODE COUNTER


All the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash.

  • High level wireless transmission security - 2.4GHz ISM band
  • Hand held controller displays rode count plus signal strength and battery level
  • Console requires two AA batteries
  • Ergonomic shape with wrist strap connector
  • Water resistant to IP65
  • Rubber moulding for grip and non slip protection
  • Console holder and protective cover
  • Shockproof
  • IEEE 802.15.4 compliant


Kit includes 1 hand held remote control and 1 base station, 1 sensor and 1 magnet.
Note: Two base stations can be combined and controlled by one remote to allow control of two windlasses. Plus, Plug and Play connectors, T-junctions and Gender Adaptors are also available. Contact your Maxwell Dealer.
$1,037.81
41661XL.jpg
Maxwell - Maxwell 8" Emergency Crank Handle f/RC & Freedom Series Windlasses (41661)
EMERGENCY CRANK HANDLE (RC SERIES)

For use with RC & Freedom Series anchor winches. Constructed of light weight, durable injection-moulded plastic, these handles float if accidentally dropped overboard.
$42.17
41889XL.jpg
Maxwell - Maxwell Up/Down Footswitch - Compact, White (41889)
Up/Down Footswitch - Compact, White
Part #: P104809

Maxwell's compact up and down foot switches are available in black and white versions. Operates via solenoids thus allowing smaller diameter wiring.
$30.14
41890XL.jpg
Maxwell - Maxwell Up/Down Footswitch - Compact, Black (41890)
Up/Down Footswitch - Compact, Black
Part #: P104810

Maxwell's compact up and down foot switches are now available in black and white versions. Operates via solenoids thus allowing smaller diameter wiring.
$30.14
42586XL.jpg
Minn Kota - Minn Kota Pontoon DeckHand (42586)
DeckHand Pontoon
Manufacturer item #1810141

For pontoons, this DeckHand gives you control of the winch from the helm as well as the flexibility to remove the winch from the boat to clear the deck. Automatically raise and lower your anchor at the touch of a button. DeckHand 40 has a 40-lb anchor capacity (anchor not included) and is pre-spooled with 100 feet of 800-lb test nylon rope. Universal davit can be mounted at base of DeckHand or in remote position on boat deck. Davit also stows anchor horizontally to eliminate anchor swing. Anchor shackle allows for quick changes between anchors. A special anti-drag system senses the bottom to allow for controlled drifting. Runs on 12-volt battery (not included).

Includes:
  • Standard DeckHand 40 anchor winch
  • MKA-16-02 Quick Release Bracket
  • Corded Remote Accessory (DH-40)
  • MKR-12 quick connect plug

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

$335.48
44120XL.jpg
Quick - Quick PTR 350 Pontoon Windlass w/Stainless Steel Bow Roller & 20lb Rubber Coated Anchor (44120)
Quick PTR 350 Pontoon windlass with stainless steel bow roller and 20 lb
Anchor


"On-deck" or "Under-deck" windlass

The Quick bow-roller is specifically designed to weigh anchor safely, thanks
to a system blocking the anchor when it is up.

The kit includes the PTR, stainless steel AISI 316 (BR X), bow-roller and
high yield rope (Dyneema), and rubber coated 20 lb River Anchor.


Features

  • Motor power: 150 W
  • Motor supply voltage: 12 V
  • Maximum pull: 573lb
  • Maximum working load: 100 Kg
  • Working load: 40 Kg
  • Current absorption @ working load (1) 13 A
  • Maximum chain speed (2) 20,8 m/min
  • Maximum chain speed @ working load (2) 19,3 m/min
  • 98' of rope
  • 3 year warranty
$1,485.00
47056XL.jpg
Quick - Quick PTR 350 Pontoon Windlass w/ Aluminum Bow-Roller and 20lb Anchor (47056)
PTR 350 w/Bow Roller

The PTR is equipped with a bow-roller to make its use more functional andpractical on boats where a windlass cannot be installed, like some multihull types.The Quick bow-roller is specifically designed to weigh anchor safely, thanks to asystem blocking the anchor when it is up.

Features:
  • On-deck or under-deck windlass
  • Comes With Aluminum Bow Roller
  • IP67 watertight motor
  • 98ft of rope
  • 20 lb anchor
  • For boats 26-39 ft.

Specs:
  • Motor Power: 150 W
  • Motor Supply Voltage: 12 V
  • Maximum Pull: 573lb
  • Maximum Working Load: 220.4 lb
  • Working Load: 88.1 lb
  • Current absorption @ working load: 13 A
  • Maximum Chain Speed: 68.2 ft/min
Out of Stock
$1,170.00
47065XL.jpg
Quick - Quick 900/UW Anchor Lifting Foot Switch - White (47065)
Foot Switch - Up - White

Anchor lifting switch w/safety cover to prevent accidental push-button operation.
$21.75
47066XL.jpg
Quick - Quick 900/DW Anchor Lowering Foot Switch - White (47066)
Foot Switch - Down - White

Anchor lowering switch w/safety cover to prevent accidental push-button operation.
$21.75
47068XL.jpg
Maxwell - Maxwell RC12/10 12V Windlass - f/3/8" Chain & 3/4" Rope (47068)
RC12/10 12V Windlass

The RC12 fully automatic windlass series is designed to effortlessly retrieve and deploy 10mm (3/8") short link chain and 16mm (5/8") to 20mm (3/4") three strand or 8-Plait rope (RC12-10) and 12mm/13mm (1/2") short link chain and 20mm (3/4") three strand or 8-Plait rope (RC12-12).

With a maximum pull of 1590 kg (3500 lb), and an anchor retrieval rate of 15m/min (50ft/min), the RC12-12 is one of the fastest and gruntiest windlasses in its class.

A sleek, Low Profile version and a fluted stainless steel capstan drum version, are available.

The RC12 is packed with innovative features combined with Maxwell's traditionally classic aesthetics, but reflecting the modern form follows function of the highly successful RC6, RC8 and RC10 series windlasses.

The elegantly designed deckplate and chainpipe cover are manufactured in polished marine-grade 316 stainless steel, as are the heavy duty pressure arm, stripper, chainwheel and fluted capstan drum.

The huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker.

Double cone-type brake/clutch mechanism permits Free Fall anchoring. Cone clutches, unlike dog clutches, provide smooth progressive engagement, ensuring safe and precise operator control.

The RC12 features Maxwell's revolutionary and Wave Design™ chainwheel.
Emergency manual retrieval is made simple and easy with Maxwell's unique Active Latch Ratchet System operation that prevents backwind of the windlass during manual hauling of the anchor.

The Maxwell-designed and innovative black, hard anodized gearbox provides numerous advantages: - Fast and easy windlass installation - More corrosion resistant - Easy to maintain and service - Takes up less room in the anchor locker - 75:1 Ratio (RC12-10) or 100:1 Ratio (RC12-12), single stage design with less moving parts, for smoother and quieter operation - Allows for multi-positioning of the gearbox/motor.

Every Maxwell automatic rope/chain windlass comes complete with all the necessary components for fully automatic dual direction control in a competitively priced package.
$3,292.69
47069XL.jpg
Maxwell - Maxwell RC12/10 12V Capstan Windlass f/3/8" Chain & 3/4" Rope (47069)
RC12/10 12V Capstan Windlass

The RC12 fully automatic windlass series is designed to effortlessly retrieve and deploy 10mm (3/8") short link chain and 16mm (5/8") to 20mm (3/4") three strand or 8-Plait rope (RC12-10) and 12mm/13mm (1/2") short link chain and 20mm (3/4") three strand or 8-Plait rope (RC12-12).

With a maximum pull of 1590 kg (3500 lb), and an anchor retrieval rate of 15m/min (50ft/min), the RC12-12 is one of the fastest and gruntiest windlasses in its class.

A sleek, Low Profile version and a fluted stainless steel capstan drum version, are available.

The RC12 is packed with innovative features combined with Maxwell's traditionally classic aesthetics, but reflecting the modern form follows function of the highly successful RC6, RC8 and RC10 series windlasses.

The elegantly designed deckplate and chainpipe cover are manufactured in polished marine-grade 316 stainless steel, as are the heavy duty pressure arm, stripper, chainwheel and fluted capstan drum.

The huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker.

Double cone-type brake/clutch mechanism permits Free Fall anchoring. Cone clutches, unlike dog clutches, provide smooth progressive engagement, ensuring safe and precise operator control.

The RC12 features Maxwell's revolutionary and Wave Design™ chainwheel.
Emergency manual retrieval is made simple and easy with Maxwell's unique Active Latch Ratchet System operation that prevents backwind of the windlass during manual hauling of the anchor.

The Maxwell-designed and innovative black, hard anodized gearbox provides numerous advantages: - Fast and easy windlass installation - More corrosion resistant - Easy to maintain and service - Takes up less room in the anchor locker - 75:1 Ratio (RC12-10) or 100:1 Ratio (RC12-12), single stage design with less moving parts, for smoother and quieter operation - Allows for multi-positioning of the gearbox/motor.

Every Maxwell automatic rope/chain windlass comes complete with all the necessary components for fully automatic dual direction control in a competitively priced package.
Out of Stock
$3,465.94
49629XL.jpg
Maxwell - Maxwell AA560 Rope Chain or All Chain Counter Control - Gray (49629)
Maxwell AA560 - Gray

Panel Mount Windlass Controller and Rode Counter

Special Features:
  • Preset stopping point and docking alarm on retrieval
  • One-touch function to deploy and retrieve a preset length of rode
  • Adjustable back lit display in feet, metres or fathoms
  • Graphic LCD screen featuring intuitive user interface for simple operation
  • Displays windlass speed and direction
  • Safety lock to help protect against accidental windlass deployment
  • Logs windlass operation hours to help ensure regular windlass maintenance
  • Weather cover and choice of black or gray console
  • Kit includes 1 console, 1 sensor, 1 magnet
$651.88
50154XL.jpg
Quick - Quick RRC H902 Radio Remote Control Hand Held Transmitter - 2 Button (50154)
Quick Hand Held Transmitter

Features
  • Number of Keys - 2
  • Power Supply - 3 alkaline AAA batteries or rechargeable Nims
  • Microcontroller-operated functions
  • FSK modulation and carrier frequency 913Mhz
  • Operating temperatures from -15°C to +70°C
  • Possibility to control more receivers with one transmitter
  • Two functions can be activated at the same time
  • Floating
  • Also working with rechargeable batteries
  • Keyboard backlighting by means of LEDs
$157.50
50156XL.jpg
Quick - Quick RRC P902 Radio Remote Control Pocket Transmitter - 2 Button (50156)
Quick Pocket Transmitter

Features
  • Number of keys - 2
  • Power supply - CR2450 3V litio alkaline-battery
  • Microcontroller-operated functions
  • FSK modulation and carrier frequency 913Mhz
  • Operating temperatures from -15°C to +70°C
  • Possibility to control more receivers with one transmitter
  • Two functions can be activated at the same time
  • Floating
Out of Stock
$112.50
50158XL.jpg
Quick - Quick Prince DP2 512 Windlass 500W - 12V - 8mm Gypsy (50158)
Quick Prince DP2 Windlass - 500W - 12V - 8mm Gypsy

Features
  • 500W, 12V, 8mm Gypsy
  • Maximum Pull - 1455lb
  • Maximum Working load - 441lb
  • Working load - 143lb
  • Maximum Chain Speed (2) - 94.8 ft/min
  • Maximum Cahin Speed @ working load (2) - 79.7 ft/min
  • Vertical windlasses
  • Stainless steel Aisi 316 base
  • Rope and chain on a single gypsy
  • Manual Free-Fall system
  • Supplied with pressure lever, up/down switch, circuit breaker
  • Inspection cover
  • Motor watertight to IP67
  • Anodized aluminium gearbox
Out of Stock
$1,312.50
50159XL.jpg
Quick - Quick Prince DP2 512 Windlass 500W - 12V - 7mm or ¼" Gypsy (50159)
Quick Prince DP2 Windlass - 500W - 12V - 7mm or 1/4" Gypsy

Features
  • 500W, 12V, 7mm or 1/4" Gypsy
  • Maximum Pull - 1455lb
  • Maximum Working load - 441lb
  • Working load - 143lb
  • Maximum Chain Speed (2) - 94.8 ft/min
  • Maximum Chain Speed @ working load (2) - 79.7 ft/min
  • Vertical windlasses
  • Stainless Steel Aisi 316 base
  • Rope and chain on a single gypsy
  • Manual Free-Fall system
  • Supplied with pressure lever, up/down switch, circuit breaker
  • Inspection cover
  • Motor watertight to IP67
  • Anodized aluminium gearbox
Out of Stock
$1,312.50
Per Page      1 - 50 of 85