Display Mounts

Sort By:  
11799.gif
Furuno - Furuno Table Top Display Mounting Bracket f/ MU-155C Display (11799)
Display Table Top Mounting Bracket with Knobs and Screws

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$309.40
13528XL.jpg
Poly-Planar - Poly-Planar Stereo Weather Enclosure - White (13528)
Stereo Weather Enclosure - White
Part Number: WC-400W

Install virtually any auto or marine stereo on your boat without fear of damage from moisture, corrosion or UV rays. The WC400 is waterproof housing that surrounds your stereo on all sides for maximum protection. A gasket-sealed, polycarbonate splash cover on the front of the rugged ABS enclosure prevents water from entering. The hinged cover lifts easily and remains out of the way in any of several positions. When open, it maintains partial splash protection while still allowing access to stereo controls. Wires and a rear connector let you hook up the stereo and antenna through the housing. A gimbal mounting bracket permits installation above or below the dash, under an electronic box or on any convenient horizontal surface.

Features
  • Accommodates any dual post, removable and DIN-style stereos
  • High Impact ABS Housing
  • Plastic Bracket
  • Dash or Overhead Mounting
  • Mounting Hardware Included
  • Available in Black or White


Specifications
Overall Dimensions: 4-316" (H) x 9-116" (W) x 10-516" (D)
$44.89
13546XL.jpg
Poly-Planar - Poly-Planar Pivot Mount (13546)
Pivot Mount
Part Number: M-1

M1 Pivot Mount brackets are designed to allow maximum mounting versatility for PolyPlanar box speakers (MA-9060, MA-800, MA-7500 and MA-1610) and other popular name box speakers. Since all speakers are directional, M1 brackets allow you to point your speakers in whatever direction produces the best sound quality for the location, whether you're in a small cabin or on the upper deck of a luxury yacht. The brackets also perform exceptionally well when mounted in marinas, restaurants or backyards.

Features
  • Simple mounting that allows you to mount speakers in difficult locations
  • Corrosion-proof construction
  • They rotate up to 360°
$23.73
14235XL.jpg
NavPod - NavPod Stanchion Kit SK135 - For All SailPods & Most SystemPods (14235)
Stanchion Kit SK135 - For All SailPods & Most SystemPods

Great for overhead mounting on Powerboats or extending the available dash space on the flybridge. Useful for unique mounting locations in the cockpit on Sailboats.

Includes two 1.25" Stainless Steel tubes with 15° bends pre-drilled for mounting 9.5" or 12" SailPods or SystemPods on a flat surface (does not fit GP1500/GP2500 Series or GP1600/GP2600 Series SystemPods).

Stanchion Kit includes:
  • 1.25" diameter 316 stainless steel
  • Mirror polished finish
  • Pre-drilled mounting and wire access holes
  • Stainless steel feet can be removed for adjusting the height
Out of Stock
$223.11
14882XL.jpg
NavPod - NavPod AG226 Pedestal Guard (14882)

AG226 Pedestal Guard

Double Bend AngleGuard 12″ Wide by 1.25″ diameter for one InstrumentPod and a large GP2030 or GP2060 SailPod 

Features:

  • 316 grade stainless steel
  • 065 gauge wall thickness
  • Mirror polished finish
  • All 1.25” include stainless steel feet (1” does not include feet)
Out of Stock
$294.51
14883XL.jpg
NavPod - NavPod AG126 Pedestal Guard (14883)

AG126 Pedestal Guard

Double Bend AngleGuard 9.5″ Wide 1.25″ for one InstrumentPod and a large GP1030 or GP1060 SailPod below on the angled section. AngleGuards are available in 1” or 1.25” diameter stainless steel tubes.

Features:

  • 316 grade stainless steel
  • .065 gauge wall thickness
  • Mirror polished finish
  • All 1.25” include stainless steel feet (1” does not include feet)
Out of Stock
$294.51
14884XL.jpg
NavPod - NavPod TP125 Top Plate Adaptor (14884)
PART #:TP125
Description:Top Plate Adaptor for 1.25" AngleGuard on Edson Steering System
W x H x D:9.5" x 9.5" x 1.25"


NavPod Protects Your Electronics In Harsh Conditions

Top Place Adaptor

NavPod AngleGuards are designed to upgrade sailboat steering systems to accommodate mounting of electronics onto NavPods.

Edson is a popular manufacturer of steering systems who has always used a 9.5" wide pedestal guard. Most of their pedestal guards are 1" in diameter. Lewmar (formally Whitlock) also has manufactured steering systems that use the 9.5" wide format. NavPod supplies the SG10 and AG10 as a easy retrofit onto either of these systems.

Because of the clean and secure method of concealing wires and the need to accommodate large connectors and heavy radar cables within the Stainless Steel tubes, NavPod recommends the larger 1.25" diameter AngleGuards. Often the existing Top Plate needs to be bored out or replaced with the TP125 to accommodate the larger diameter. NavPod supplies Polished Stainless Steel feet with all 1.25" AngleGuards.
Out of Stock
$151.71
15433XL.jpg
Raymarine - Raymarine Console Mounting Bracket, ST40 Instruments (15433)
Console Mounting Bracket, ST40 Instruments

Aluminum bracket allows for tabletop, console, or overhead mounting of ST40 Instruments

Includes bracket and mounting hardware.
$42.27
15871XL.jpg
NavPod - NavPod GP1060 SailPod Uncut f/9.5" Pedestal Guards (15871)
GP1060 Uncut Flush Front

Uncut - Flush Front (usable face = 13.75"w x 10.75"h).

Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach. Dimensions (16.75"w x 13"h x 6.5"d)
Out of Stock
$428.39
16015XL.jpg
NavPod - NavPod GP1061 SailPod Precut f/Raymarine C120, E120 & Simrad NSE12 f/9.5" Guard (16015)
Pre-cut for Raymarine 12" C120/E120

Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach. Dimensions (16.75"w x 13"h x 6.5"d)
Out of Stock
$446.24
16136XL.jpg
NavPod - NavPod PP5050 PowerPod Uncut Grand Prix Series (16136)
PART #:PP5050
Description:PowerPod, Uncut
(usable face = 12.75"w x 8.55"h)
W x H x D:15.125" x 13" x 10"



NavPod Protects Your Electronics In Harsh Conditions


PowerPod Grand Prix Series with 20/40 Swivel Base

PowerPods are simply a better way to mount your Radar/Chartplotter, Fishfinder or GPS. You combine the clean look of flush mounting with the features of a swivel base. Turn the PowerPod to get the best view of your color display. Let your co-pilot enter the waypoints while you steer the boat, then swivel the display back for you to see.

The Latest In Industrial Design
Built to complement the latest marine electronic products.

Double Seal for Watertight Integrity
Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability over many years.

Polished Stainless Steel TamperProof Fasteners
Large size and strength with new buttonhead style screws that have deep wrench recesses for better tightening power. UV stable polyurethane washers under each fastener improves sealing and holding power of fasteners and long 6 tamperproof wrench provided for easier assembly.

Pre-Cut Models
Includes all of the necessary parts in order to flush mount the unit Comes with a Flush Mount kit which includes a specific gasket and mounting hardware if not supplied by the manufacturer with the unit.
Out of Stock
$383.76
16137XL.jpg
NavPod - NavPod PP5051 PowerPod Grand Prix Series Precut f/Raymarine C80 & E80 (16137)
PART #:PP5051
Description:PowerPod, Pre-cut for Raymarine 8" C80/E80
W x H x D:15.125" x 13" x 10"



NavPod Protects Your Electronics In Harsh Conditions


PowerPod Grand Prix Series with 20/40 Swivel Base

"PowerPods are simply a better way to mount your Radar/Chartplotter, Fishfinder or GPS. You combine the clean look of flush mounting with the features of a swivel base. Turn the PowerPod to get the best view of your color display. Let your co-pilot enter the waypoints while you steer the boat, then swivel the display back for you to see."

The Latest In Industrial Design
Built to complement the latest marine electronic products.

Double Seal for Watertight Integrity
Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability over many years.

Polished Stainless Steel TamperProof Fasteners
Large size and strength with new buttonhead style screws that have deep wrench recesses for better tightening power. UV stable polyurethane washers under each fastener improves sealing and holding power of fasteners and long 6 tamperproof wrench provided for easier assembly.

Pre-Cut Models
Includes all of the necessary parts in order to flush mount the unit Comes with a Flush Mount kit which includes a specific gasket and mounting hardware if not supplied by the manufacturer with the unit.

NavPod Protects Your Electronics In Harsh Conditions
Out of Stock
$410.54
16154XL.jpg
NavPod - NavPod PP5061 PowerPod Precut f/Grand Prix Series f/Raymarine C120 & E120 Dash Mount (16154)
PART #:PP5061
Description:PowerPod, Pre-cut for Raymarine 12" C120/E120
W x H x D:16.625" x 15.125" x 11.25"



NavPod Protects Your Electronics In Harsh Conditions


PowerPod Grand Prix Series with 20/40 Swivel Base

"PowerPods are simply a better way to mount your Radar/Chartplotter, Fishfinder or GPS. You combine the clean look of flush mounting with the features of a swivel base. Turn the PowerPod to get the best view of your color display. Let your co-pilot enter the waypoints while you steer the boat, then swivel the display back for you to see."

The Latest In Industrial Design
Built to complement the latest marine electronic products.

Double Seal for Watertight Integrity
Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability over many years.

Polished Stainless Steel TamperProof Fasteners
Large size and strength with new buttonhead style screws that have deep wrench recesses for better tightening power. UV stable polyurethane washers under each fastener improves sealing and holding power of fasteners and long 6 tamperproof wrench provided for easier assembly.

Pre-Cut Models
Includes all of the necessary parts in order to flush mount the unit Comes with a Flush Mount kit which includes a specific gasket and mounting hardware if not supplied by the manufacturer with the unit.

NavPod Protects Your Electronics In Harsh Conditions
Out of Stock
$473.01
16251XL.jpg
NavPod - NavPod GP1040 SailPod Uncut f/9.5" Pedestal Guards (16251)
PART #:GP1040
Description:Uncut (usable face = 17.5"w x 7.375"h)
W x H x D:20.25" x 9.5" x 6.125"


NavPod Protects Your Electronics In Harsh Conditions

Un-Cut NavPods are for you to choose your own layout or for mounting electronics that NavPod doesn't provide a Pre-Cut for. The face of the NavPod can easily be cut with a "Rotozip". It's a small handheld router style cutter that shreds the material while cutting. This eliminates any melting of the plastic material. It is also important to note that when selecting a possible Un-cut NavPod, the depth measurement stated in the chart is overall outside measurement. Actual internal clearance can be reduced by curvature from the design or molded indents for the mounting system. This can reduce the overall and needs to be considered when making a determination of actual available depth clearance.

Watertight Silicone Seal
Keeps rain and salt water spray off electrical connections on the back of electronics

Tamperproof
Special fasteners and wrench are included that provide security and convenience to leave electronics on-board

Concealed Wiring
No loose wires are exposed to corrosion and UV damage

Clean Installation
The clean look of flush mounting. Mount your display where you can best see and reach it.

Pre-Cut Models
Come with a Flush Mount Kit, which includes the specific gasket and mounting hardware for your electronics if not supplied by manufacturer with unit.
Out of Stock
$383.76
16253XL.jpg
NavPod - NavPod GP1050 SailPod Uncut f/9.5" Pedestal Guards (16253)
GP1050 Uncut Flush Front

Uncut - Flush Front (usable face = 12.75"w x 8.75"h).

Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach. Dimensions (15.125"w x 10.88"h x 6.125"d)
Out of Stock
$356.99
16254XL.jpg
NavPod - NavPod GP1051 SailPod Precut f/Raymarine C80, E80 & Simrad NSE8 f/ 9.5" Pedestal Guard (16254)
SailPod for Raymarine C80/E80 or Simrad NSE8

Pre-cut for Raymarine C80/E80 or Simrad NSE8. Fits 9.5" wide pedestal guards. Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach. Dimensions (15.125"w x 10.88"h x 6.125"d)
Out of Stock
$383.76
16260XL.jpg
NavPod - NavPod GP1170 SystemPod Uncut f/9.5" Pedestal Guards (16260)
PART #:GP1170
Description:Uncut (usable face = 20.77"w x 9.64"h)
W x H x D:N/A


NavPod Protects Your Electronics In Harsh Conditions

Un-Cut NavPods are for you to choose your own layout or for mounting electronics that NavPod doesn't provide a Pre-Cut for. The face of the NavPod can easily be cut with a "Rotozip". It's a small handheld router style cutter that shreds the material while cutting. This eliminates any melting of the plastic material. It is also important to note that when selecting a possible Un-cut NavPod, the depth measurement stated in the chart is overall outside measurement. Actual internal clearance can be reduced by curvature from the design or molded indents for the mounting system. This can reduce the overall and needs to be considered when making a determination of actual available depth clearance.

Watertight Silicone Seal
Keeps rain and salt water spray off electrical connections on the back of electronics

Tamperproof
Special fasteners and wrench are included that provide security and convenience to leave electronics on-board

Concealed Wiring
No loose wires are exposed to corrosion and UV damage

Clean Installation
The clean look of flush mounting. Mount your display where you can best see and reach it.

Pre-Cut Models
Come with a Flush Mount Kit, which includes the specific gasket and mounting hardware for your electronics if not supplied by manufacturer with unit.
Out of Stock
$446.24
16267XL.jpg
NavPod - NavPod GP2050 SailPod Uncut f/12" Guard (16267)
Part #: GP2050
Description: Uncut

NavPod Protects Your Electronics In Harsh
Conditions


Uncut Flush Front

Usable Face = 12.75"w x 8.75"h

Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach. Dimensions (15.125"w x 10.88"h x 6.125"d) Centimeters (38.42w x 27.62h x 15.56d).
Out of Stock
$356.99
16268XL.jpg
NavPod - NavPod GP2051 SailPod Precut f/Raymarine C80 & E80 f/12" Guard (16268)
Part #: GP2051
Description: Pre-Cut

NavPod Protects Your Electronics In Harsh
Conditions


Pre-Cut For Raymarine 8" C80/E80

Angle Guards 12" Wide

Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach. Dimensions (15.125"w x 10.88"h x 6.125"d) Centimeters (38.42w x 27.62h x 15.56d).
Out of Stock
$383.76
16269XL.jpg
NavPod - NavPod GP2060 SailPod Uncut f/12" Guard (16269)
PART #:GP2060
Description:Uncut (usable face = 13.75"w x 10.75"h)
W x H x D:16.75" x 13" x 6.5"


NavPod Protects Your Electronics In Harsh Conditions

Grand Prix Series Radar / Chartplotter NavPods For 12" Wide Pedestal Guards

Watertight Silicone Seal
Keeps rain and salt water spray off electrical connections on the back of electronics

Tamperproof
Special fasteners and wrench are included that provide security and convenience to leave electronics on-board

Concealed Wiring
No loose wires are exposed to corrosion and UV damage

Clean Installation
The clean look of flush mounting. Mount your display where you can best see and reach it.

Pre-Cut Models
Come with a Flush Mount Kit, which includes the specific gasket and mounting hardware for your electronics if not supplied by manufacturer with unit.
Out of Stock
$428.39
16270XL.jpg
NavPod - NavPod GP2061 SailPod Precut f/Raymarine C120 & E120 f/12" Guard (16270)
PART #:GP2061
Description:Pre-cut for Raymarine 12" C120 / E120
W x H x D:16.75" x 13" x 6.5"


NavPod Protects Your Electronics In Harsh Conditions

Grand Prix Series Radar / Chartplotter NavPods For 12" Wide Pedestal Guards

Watertight Silicone Seal
Keeps rain and salt water spray off electrical connections on the back of electronics

Tamperproof
Special fasteners and wrench are included that provide security and convenience to leave electronics on-board

Concealed Wiring
No loose wires are exposed to corrosion and UV damage

Clean Installation
The clean look of flush mounting. Mount your display where you can best see and reach it.

Pre-Cut Models
Come with a Flush Mount Kit, which includes the specific gasket and mounting hardware for your electronics if not supplied by manufacturer with unit.

Out of Stock
$446.24
16276XL.jpg
NavPod - NavPod GP2170 Grand Prix Series Uncut f/12" Pedestal Guards (16276)
PART #:GP2170
Description:Uncut (Usable face = 20.77"w x 9.64"h)
W x H x D:N/A


NavPod Protects Your Electronics In Harsh Conditions

Grand Prix Series Radar / Chartplotter NavPods For 12" Wide Pedestal Guards

Watertight Silicone Seal
Keeps rain and salt water spray off electrical connections on the back of electronics

Tamperproof
Special fasteners and wrench are included that provide security and convenience to leave electronics on-board

Concealed Wiring
No loose wires are exposed to corrosion and UV damage

Clean Installation
The clean look of flush mounting. Mount your display where you can best see and reach it.

Pre-Cut Models
Come with a Flush Mount Kit, which includes the specific gasket and mounting hardware for your electronics if not supplied by manufacturer with unit.
Out of Stock
$446.24
21060XL.jpg
NavPod - NavPod SG10 Pedestal Guard (21060)

SG10 Pedestal Guard

SG10 StraightGuard has no bends and is designed to fit a single InstrumentPod. 1” diameter stainless steel tubes. No feet included on 1″ StraightGuards.

Features:

  • 316 grade stainless steel
  • 065 gauge wall thickness
  • Mirror polished finish
  • All 1.25” include stainless steel feet (1” does not include feet)
Out of Stock
$160.64
21062XL.jpg
NavPod - NavPod AG127 Pedestal Guard (21062)

AG127 Pedestal Guard

Double Bend AngleGuard 9.5″ Wide by 1.25″ diameter for one InstrumentPod and a P1050/GP1800/GP1200/GP1900 SailPod below on the angled section. Both Single and Double Bend AngleGuards are available in 1” or 1.25” diameter stainless steel tubes.

Features:

• 316 grade stainless steel

• 065 gauge wall thickness

• Mirror polished finish

• All 1.25” include stainless steel feet (1” does not include feet)

Out of Stock
$294.51
28059XL.jpg
NavPod - NavPod AG118 Pedestal Guard (28059)

AG118 Pedestal Guard 

Single Bend AngleGuard 9.5″ Wide by 1.25″ diameter for all SailPods and SystemPods.

Features:

  • 316 grade stainless steel
  • 065 gauge wall thickness
  • Mirror polished finish
  • All 1.25” include stainless steel feet (1” does not include feet)
Out of Stock
$267.74
28654XL.jpg
NavPod - NavPod TP225 Top Plate f/12" Wide 1.25" Diameter Angleguard - White (28654)
Part #: TP225
Description: Top Plate

NavPod Protects Your Electronics In Harsh
Conditions


Top Plate For 12" Wide Angle Guard

White top plate for 12" wide angle guard 1.25" diameter.
Out of Stock
$178.49
28949XL.jpg
NavPod - NavPod PP4808 PowerPod Precut f/Simrad NSS8 (28949)
NavPod Protects Your Electronics In Harsh Conditions

Pre-Cut For Simrad NSS8

20 Degrees for on dash mounting. Internal swivel mechanism made of reinforced nylon. Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. PowerPods are simply a better way to mount your Radar/Chartplotter, Fishfinder or GPS.
Out of Stock
$383.76
28974XL.jpg
Lowrance - Lowrance MB-8 1-1/2" Ball Mount Bracket (28974)
MB-8

R-A-M 1-1/2" ball mount bracket with long arm and mounting plate.

Works with: FishMark 160, FishMark 240, GlobalMap 1000, GlobalMap 2000, GlobalMap 2400, GlobalMap 3000, GlobalMap 4000M, GlobalMap 5000C, GlobalMap 6000C, GlobalMap 7000C, GlobalNav II, GlobalNav IIA, LCX-104C, LCX-111C HD, LCX-113C HD, LCX-15CI, LCX-15CT, LCX-15MT, LCX-16CI, LCX-17M, LCX-18C, LCX-19C, LCX-20C, LCX-25C, LCX-26C HD, LCX-27C, LCX-28C HD, LCX-37C, LCX-38C HD, LMS-240, LMS-350, LMS-350A, X-70, X-70A, X-71, X-91
Out of Stock
$46.39
30237XL.jpg
Lowrance - Lowrance 1" Ball Mount Bracket (30237)
MB-7

R-A-M 1" ball mount bracket with arm and mounting plate.

Works with: Accura 240, Cuda 168 EX, FishEasy 2, FishElite 320, FishElite 480, FishElite 500C, FishElite 502C iGPS, FishElite 640C, FishElite 642C iGPS, FishMark 160, FishMark 240, FishMark 320, FishMark 480, FishMark 500C, FishMark 640C, GlobalMap 2400, GlobalMap 2400, GlobalMap 3200, GlobalMap 3300C, GlobalMap 3500C, GlobalMap 4800, IntelliMap 320, IntelliMap 480, IntelliMap 500C, IntelliMap 502C iGPS, IntelliMap 642C iGPS, Journey, LMS-240, LMS-320, LMS-330C, LMS-332C, LMS-334C iGPS, LMS-335C DF, LMS-337C DF, LMS-339C DF iGPS, LMS-480, SeaCharter 320DF, SeaCharter 480DF, SeaCharter 500C DF, SeaCharter 502C DF iGPS, SeaCharter 640C DF, SeaCharter 642C DF iGPS, SeaFinder 240DF, SeaFinder 320DF, Status, Trifinder 2, X100C, X102C, X105C DF, X107C DF, X125, X135, X136DF, X51, X58DF, X-71, X87, X88DF, X-91, X97, X98DF
$37.10
30939XL.jpg
NavPod - NavPod MP420 Maxi MastPod System (30939)
Part #: MP420
Description: Uncut

NavPod Protects Your Electronics In Harsh
Conditions


Uncut Maxi MastPod System

Usable Face = 7.5"w x 17.5"h
Includes brackets and hardware
Out of Stock
$446.24
32605XL.jpg
NavPod - NavPod PP4802 PowerPod Precut f/Garmin GPSMAP® 4008 & 4208 (32605)
Part #: PP4802
Description: Pre-Cut

NavPod Protects Your Electronics In Harsh
Conditions


Pre-Cut For Garmin 4008/4208

20 Degrees for on dash mounting. Internal swivel mechanism made of reinforced nylon. Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. PowerPods are simply a better way to mount your Radar/Chartplotter, Fishfinder or GPS. Dimensions - (13.00"w X 12.00"h X 9.5"d) Centimeters - (33.02w X 30.48h X 24.13d)
Out of Stock
$383.76
33182XL.jpg
NavPod - NavPod PP4804 PowerPod Precut f/Garmin GPSMAP® 5008 & 5208 (33182)
Part #: PP4804

Description: Pre-Cut

NavPod Protects Your Electronics In Harsh Conditions

Pre-Cut For Garmin 5008/5208

20 Degrees for on dash mounting. Internal swivel mechanism made of reinforced nylon. Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. PowerPods are simply a better way to mount your Radar/Chartplotter, Fishfinder or GPS.
Out of Stock
$383.76
34786XL.jpg
Scanstrut - Scanstrut Scanpod Helm Pod Deep Uncut - Usable Face 8.6" x 12.8" - White (34786)

Scanpod Helm Pod Deep Uncut - Usable Face 8.6" x 12.8" - White

Specifications:

  • Color: White
  • Depth: 6.3"
  • Case Depth: Deep
  • Usable Face: 8.6H" x 12.8W"

Scanpod Range

The exciting range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot control onto yachts and powerboats

Features:

  • Simplified range - easy product selection
  • Manufactured from acrylic caped ABS plastic - tough, durable and UV stable
  • Tamper proof stainless fastenings - secure install without self-tapping into plastic
  • Innovative watertight seal system - full instrument protection supplied uncut to fit any display
$320.63
34790XL.jpg
Scanstrut - Scanstrut Scanpod Helm Pod Deep Uncut - Usable Face 12.2" x 17.3" - White (34790)

Scanpod Helm Pod Deep Uncut - Usable Face 12.2" x 17.3" - White

Specifications:

  • Color: White
  • Depth: 7.0""
  • Case Depth: Deep
  • Usable Face: 17.3H" x 12.2W"

Scanpod Range

The exciting range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot control onto yachts and powerboats

Features:

  • Simplified range - easy product selection
  • Manufactured from acrylic caped ABS plastic - tough, durable and UV stable
  • Tamper proof stainless fastenings - secure install without self-tapping into plastic
  • Innovative watertight seal system - full instrument protection supplied uncut to fit any display
$467.90
34792XL.jpg
Scanstrut - Scanstrut Scanpod Helm Pod 4 Instrument Uncut - Usable Face 4.3" x 19.7" - White (34792)

Scanpod Helm Pod 4 Instrument Uncut - Usable Face 4.3" x 19.7" - White

Specifications:

  • 4 Instrument
  • Color: White
  • Depth: 3.2"
  • Usable Face: 4.3H" x 19.75W"

Scanpod Range

The exciting range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot control onto yachts and powerboats

Features:

  • Simplified range - easy product selection
  • Manufactured from acrylic caped ABS plastic - tough, durable and UV stable
  • Tamper proof stainless fastenings - secure install without self-tapping into plastic
  • Innovative watertight seal system - full instrument protection supplied uncut to fit any display
$273.11
34905XL.jpg
NavPod - NavPod PP4805 PowerPod Precut f/Raymarine C70 (34905)
Part #: PP4805
Description: Pre-Cut

NavPod Protects Your Electronics In Harsh
Conditions


Pre-Cut For Raymarine C70

20 Degrees for on dash mounting. Internal swivel mechanism made of reinforced nylon. Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. PowerPods are simply a better way to mount your Radar/Chartplotter, Fishfinder or GPS. Dimensions (13.00"w X 12.00"h X 9.5"d) Centimeters (33.02w X 30.48h X 24.13d).
Out of Stock
$383.76
34942XL.jpg
Raymarine - Raymarine C90W Trunnion Kit (34942)
Bracket Mounting kit for C90W multifunction display.
Out of Stock
$44.61
34943XL.jpg
Raymarine - Raymarine C120W Trunnion Kit (34943)
C120W Trunnion Kit

Bracket mounting kit for Raymarine's C120W multifunction display.
Out of Stock
$44.61
35422XL.jpg
NavPod - NavPod TPK300 Tamperproof Wrench Set (35422)
Part #: TPK300

NavPod Protects Your Electronics In Harsh
Conditions


Tamper-Proof Wrench Set

Available in 2.5", 6" and 6" T Handle.
$17.84
35423XL.jpg
NavPod - NavPod GP1030 SailPod Uncut f/9.5" Pedestal Guard (35423)
Part #: GP1030
Description: Uncut

NavPod Protects Your Electronics In Harsh Conditions

Uncut Flush Front 9.5"

Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach.
Out of Stock
$428.39
35424XL.jpg
NavPod - NavPod GP1031 SailPod Precut f/Raymarine C120W f/9.5" Pedestal Guard (35424)
Part #: GP1031
Description: Pre-Cut

NavPod Protects Your Electronics In Harsh Conditions

Pre-Cut for Raymarine 9.5" C120W

Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners.
Out of Stock
$446.24
35426XL.jpg
NavPod - NavPod GP2030 SailPod Uncut f/12" Pedestal Guard (35426)
Part #: GP2030
Description: Uncut

NavPod Protects Your Electronics In Harsh Conditions

Uncut - Flush Front 12"

Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach.
Out of Stock
$428.39
35427.gif
NavPod - NavPod GP2031 SailPod Precut f/Raymarine C120W & E120W f/12" Guard (35427)
Part #: GP2031
Description: Pre-Cut

NavPod Protects Your Electronics In Harsh Conditions

Pre-Cut for Raymarine 12" C120W & E120W

Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach.
Out of Stock
$446.24
35428XL.jpg
NavPod - NavPod GP2033 SailPod Precut f/Furuno MFD12 f/12" Guard (35428)
Part #: GP2033
Description: Pre-Cut

NavPod Protects Your Electronics In Harsh
Conditions


Pre-Cut for Furuno 12" MFD12

Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach.
Out of Stock
$446.24
35429XL.jpg
NavPod - NavPod PP5030 PowerPod Uncut (35429)

PP5030 PowerPod Uncut

20° for on dash mounting. Internal swivel mechanism made of reinforced nylon. Outer silicone seal is complemented by an internal seal made of memory resistant urethan foam gasketing that keeps its shape and sealing ability. PowerPods are simply a better way to mount your Radar/Chartplotter, Fishfinder or GPS.

Out of Stock
$446.24
35430XL.jpg
NavPod - NavPod PP5031 PowerPod Precut f/Raymarine C120W (35430)
Part #: PP5031
Description: Pre-Cut

NavPod Protects Your Electronics In Harsh
Conditions


Pre-Cut for Raymarine C120W

20 Degrees for on dash mounting. Internal swivel mechanism made of reinforced nylon. Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Built to complement the latest in Marine Technology. PowerPods are simply a better way to mount your Radar/Chartplotter, Fishfinder or GPS.
Out of Stock
$473.01
35431XL.jpg
NavPod - NavPod PP5033 PowerPod Precut f/Furuno MFD12 (35431)
Part #: PP5033
Description: Pre-Cut

NavPod Protects Your Electronics In Harsh
Conditions


Pre-Cut For Furuno MFD12

20 Degrees for on dash mounting. Internal swivel mechanism made of reinforced nylon. Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Built to complement the latest in Marine Technology. PowerPods are simply a better way to mount your Radar/Chartplotter, Fishfinder or GPS.
Out of Stock
$473.01
35432XL.jpg
NavPod - NavPod GP1052 SailPod Precut f/Raymarine C90W & E90W f/9.5" Pedestal Guard (35432)
Part #: GP1052
Description: Pre-Cut

NavPod Protects Your Electronics In Harsh
Conditions


Pre-Cut For Raymarine 9.5" C90W & E90W

Grand Prix serires outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach. Dimensions (15.125"w x 10.88"h x 6.125"d) Centimeters (38.42w x 27.62h x 15.56d)
Out of Stock
$383.76
35433XL.jpg
NavPod - NavPod GP2052 SailPod Precut f/Raymarine C90W & E90W f/12" Guard (35433)
Part #: GP2052
Description: Pre-Cut

NavPod Protects Your Electronics In Harsh
Conditions


Pre-Cut For Raymarine C90W & E90W for use with 12" Pedestal guards.

Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach. Dimensions (15.125"w x 10.88"h x 6.125"d) Centimeters (38.42w x 27.6h x 15.56d)
Out of Stock
$383.76
35434XL.jpg
NavPod - NavPod PP5052 PowerPod Precut f/Raymarine C90W (35434)
Part #: PP5052
Description: Pre-Cut

NavPod Protects Your Electronics In Harsh
Conditions


Pre-Cut For Raymarine C90W

20 Degrees for on dash mounting. Internal swivel mechanism made of reinforced nylon. Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. PowerPods are simply a better way to mount your Radar/Chartplotter, Fishfinder or GPS.
Out of Stock
$410.54
Per Page      1 - 50 of 659