Charger/Inverter Combos

Sort By:  
44873XL.jpg
Xantrex - Xantrex Freedom 458 Inverter/Charger - 2500W (44873)
Freedom 458 Inverter/Charger - 2500W
120 Vac / 60 Hz

With filtered modified sine wave output, the Freedom 458 inverter/charger has the ability to run electrical equipment, appliances and even sensitive electronics. Perfect for any RV, the temperature controlled multistage charging ensures that your batteries are recharged quickly, and safety features such as automatic shut down protects your expensive deep-cycle batteries from excessive depletion.

AC Power Inverter with High Surge Capability, 3-Stage Charger

With filtered modified sine wave output, Freedom inverter/chargers run virtually anything, from electrical equipment to appliances and electronics in your RV. Temperature controlled multistage charging ensures that your batteries are recharged quickly, and automatic shutdown and other safety features protect your expensive deep-cycle batteries from excessive depletion.

For inverter/charger control and basic system monitoring, use the Freedom Basic Remote. For advanced battery monitoring and remote control, Freedom 458 systems can be paired with optional Link instrumentation.

Product Features:
  • MSW AC power inverter with high surge capability
  • Automatic 3-stage battery charger
  • Temperature compensation with equalization stage provides optimal charging of deep cycle batteries
  • Built-in transfer switch automatically transfers between inverter power and incoming AC power
  • Power sharing prevents source AC input circuit breaker from tripping
  • Customized settings can be programmed with the Freedom Basic Remote or Link 1000 panels
  • Includes battery temperature sensor
  • 30 month warranty


Protection Features:
  • Over voltage and under voltage protection
  • Over-temperature protection
  • Overload protection
  • Short circuit protection

WarningWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$1,348.20
57573XL.jpg
Xantrex - Xantrex Freedom HF 1055 Inverter Charger - 120VAC 55A 12VDC (57573)
Freedom HF 1055 Inverter Charger - 120VAC 55A 12VDC

The new generation Freedom HF is equipped with quick-connect AC terminals and ignition lockout capability. The quick-connect AC terminals enable quick installation eliminating the need for strain relief clamps. The ignition lockout feature helps to minimize battery drain by disabling the inverter when the ignition is turned off.

The Freedom HF Inverter/Charger is one of the smallest, lightest, and most affordable inverter/chargers in the market today. The Freedom HF Inverter/Charger features modified sine wave output and is designed to operate entertainment systems and small appliances in boats, RV's and trucks. The Freedom HF is available in three models: 1000 watts with a 20-amp charger, 1000 watts with a 55-amp charger and 1800 watts with a 40-amp charger.

Multistage charging helps ensure that batteries are recharged quickly and efficiently. All models are equipped with a built-in automatic transfer switch and dual GFCI receptacle. Detachable digital remote control panel display provides precise system information and can be mounted at a convenient location for remote monitoring.

Some of the key feature enhancements include quick-connect AC terminal block on both AC input and output for incredibly easy installation. The ignition lockout feature minimizes battery drain by disabling the inverter when the ignition is turned off.

Product Features:
  • Input Voltage: 12V
  • AC Output: GFCI and/or Hardwire
  • Designed to power demanding loads such as microwave ovens, TVs, DVD players, small appliances and other electronic equipment
  • Removable digital display pre-attached with 25' extension cable for remote system monitoring
  • Ignition lockout feature helps to minimize battery drain
  • Automatic three-stage battery charger
  • Designed to be hardwired using quick-connect AC terminal blocks or by connecting AC through GFCI receptacles (included)
  • Built-in 30-amp relay to automatically transfer between inverter power and incoming AC utility power


Protection Features:
  • Battery over-voltage and under-voltage protection
  • Over-temperature shutdown
  • Automatic overload protection
  • Short-circuit protection
  • Ground-fault protection
  • ETL certified to UL458 for use in mobile RV and commercial applications

WarningWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

$547.63
59411XL.jpg
Mastervolt - Mastervolt Mass Combi 12/1600-60 (12V/230V) (59411)
Mass Combi 12/1600-60 (12V/230V)

Continuous power and peace of mind in all conditions

The renewed Mass Combi offers the best price/quality ratio. Based on the exceptionally reliable Mass Combiseries, the four new models now offer even more power at a highly competitive price. In addition, they arealso available in two customer-friendly variations with remote control or MasterBus.

The powerful 3-step+ battery charger guarantees maximum battery life and can simultaneously charge twobattery banks. The inverter with high peak power starts even the heaviest loads, with the Mass Combi12/1600 being easily sufficient for your espresso machine. A built-in distribution system switches betweengrid and inverter power, while two separate AC outputs allow users to connect critical loads to a preferredgroup.

Grid connected solar power system with energy storage
The Mass Combi enables the expansion of a grid connected solar power system with energy storage inbatteries. This way the majority of the generated energy is used, and users are less dependent on theelectricity grid. In this setup, the Mass Combi is part of a MasterBus controlled system.

The benefits of the improved Mass Combi:
  • Compact, lightweight and no hum thanks to HF technology
  • High yield and more power from your batteries
  • Intelligent 3-step+ battery charger with low DC ripple current for fast charging times and long battery life
  • Charges two individual battery banks simultaneously
  • Quiet, powerful inverter with 200 % peak power
  • Power Assist: extra power assistance from the batteries in case of limited grid or generator power(prevents blown fuses)
  • Pure sine wave energy prevents failures and damage to sensitive equipment such as adapters
  • Dual AC outputs to separate critical equipment from heavy loads
  • Professional connections ensure fast installation and operational security
  • CE approved and E-marking for mobile applications


Specifications

Specifications Sine Wave Inverter
  • Nomimal DC voltage: 12 V (10-15 V)
  • Output voltage: 230 V (± 5 %), adjustable 180-250 V
  • Output frequency: 50/60 Hz (± 0.05 %), configurable
  • Output waveform: true sine, Thd < 2.5 % under standard conditions
  • Continuous power at 25°C / 77°F, cos phi 1: 1600 W
  • Max. peak load: 3000 W
  • Max. efficiency: >= 90 %
  • Max. ripple on DC (battery at full load): < 5 %
  • No-load power consumption on DC (ON/inverterOFF/OFF/energy saving): 9 W / 0.1 W / 0 W / 0.5 W
  • Parallel configuration: no
  • 3-Phase configuration: no
  • Synchronize with mains/generator: yes


Specifications Battery Charger
  • Input voltage range: 180-265 V
  • Max. input current: 4.5 A
  • Max. charge current at 25°C / 77°F: 60 A at 14.25 V, adjustable
  • Secondary charger output voltage: 12 V
  • Secondary charger output current: 5 A
  • No-load consumption on AC: < 15 W
  • Battery temperature sensor: yes, included
  • Battery voltage sense: automatic compensation


Specifications Transfer System
  • AC input 1: 50 A (25 A switched, to short break output)
  • AC output 1: 25 A (short break output)
  • AC output 2: 50 A (power output)
  • AC input fuse: yes, resettable
  • Transfer speed: half seamless (25 ms max., 10 ms typical)
  • Transfer voltage range: 180-265 V
  • Transfer frequency range: 45-65 Hz

General Specifications
  • Display/read-out: LED display
  • Dimensions, HxWxD: 14.6 x 12.5 x 5.6 inch
  • Weight: 17.2 lb
  • Approvals: CE, ABYC, E4


Technical Specifications
  • Charge characteristic: 3-step+ (IUoUo, fully automatic), Equalize
  • Battery types: AGM/gel/MLI/flooded/spiral/traction
  • Recommended battery capacity: 120-360 Ah (based on gel batteries, may differ for othertypes)
  • Ground relay: yes, configurable
  • Temperature range (ambient temp.): -25°C to 60°C, derating > 25°C-13 to 140°F
  • Protection degree: IP23 (vertical mounting)
  • Safety class: IEC protection class I
  • Humidity protection: conformal coating, max. 95 % relative humidity, non condensing
  • Protections: over temperature, overload, short circuit, high/low battery voltage
  • Cooling: maintenance-free vario fans
  • Power Assist: yes
  • MasterBus compatible: yes, in combination with a MasterBus Combi Interface

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$2,165.88
59412XL.jpg
Mastervolt - Mastervolt Mass Combi 12/2200-100 (12V/230V) (59412)
Mass Combi 112/2200-100 (12V/230V)

Continuous power and peace of mind in all conditions

The renewed Mass Combi offers the best price/quality ratio. Based on the exceptionally reliable Mass Combiseries, the four new models now offer even more power at a highly competitive price. In addition, they arealso available in two customer-friendly variations with remote control or MasterBus.

The powerful 3-step+ battery charger guarantees maximum battery life and can simultaneously charge twobattery banks. The inverter with high peak power starts even the heaviest loads, with the Mass Combi12/1600 being easily sufficient for your espresso machine. A built-in distribution system switches betweengrid and inverter power, while two separate AC outputs allow users to connect critical loads to a preferredgroup.

Grid connected solar power system with energy storage
The Mass Combi enables the expansion of a grid connected solar power system with energy storage inbatteries. This way the majority of the generated energy is used, and users are less dependent on theelectricity grid. In this setup, the Mass Combi is part of a MasterBus controlled system.

The benefits of the improved Mass Combi:
  • Compact, lightweight and no hum thanks to HF technology
  • High yield and more power from your batteries
  • Intelligent 3-step+ battery charger with low DC ripple current for fast charging times and long battery life
  • Charges two individual battery banks simultaneously
  • Quiet, powerful inverter with 200 % peak power
  • Power Assist: extra power assistance from the batteries in case of limited grid or generator power(prevents blown fuses)
  • Pure sine wave energy prevents failures and damage to sensitive equipment such as adapters
  • Dual AC outputs to separate critical equipment from heavy loads
  • Professional connections ensure fast installation and operational security
  • CE approved and E-marking for mobile applications


Specifications

Specifications Sine Wave Inverter
  • Nomimal DC voltage: 12 V (10-15 V)
  • Output voltage: 230 V (± 5 %), adjustable 180-250 V 50/60 Hz (± 0.05 %)
  • Output waveform: true sine, Thd < 2.5 % under standard conditions
  • Continuous power at 25°C / 77°F, cos phi 1: 2150 W
  • Max. peak load: 4000 W
  • Max. efficiency: >= 90 %
  • Parallel configuration: no
  • Synchronize with mains/generator: yes


Specifications Battery Charger
  • Input voltage range: 180-265 V
  • Max. input current: 7.2 A
  • Max. charge current at 25°C / 77°F: 100 A at 14.25 V
  • Secondary charger output current: 5 A
  • Battery temperature sensor: yes, included


Specifications Transfer System
  • AC output 1: 25 A (short break output)
  • AC output 2: 50 A (power output)
  • Transfer speed: half seamless (25 ms max., 10 ms typical)

General Specifications
  • Display/read-out: LED display
  • Dimensions, HxWxD: 19.5 x 12.5 x 6.1 inch
  • Weight: 24.3 lb
  • Approvals: CE, ABYC, E4


Technical Specifications
  • Charge characteristic: IUoUo, automatic / 3-step+ for gel/AGM/MLI/wet/spiral/traction
  • Ground relay: yes, configurable
  • Temperature range (ambient temp.): -25°C to 60°C, derating > 25°C-13 to 140°F
  • Protection degree: IP23 (vertical mounting)
  • Protections: over temperature, overload, short circuit, high/low battery voltage
  • Cooling: maintenance-free vario fans
  • MasterBus compatible: yes, in combination with a MasterBus Combi Interface

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$2,864.56
59413XL.jpg
Mastervolt - Mastervolt Mass Combi 24/1800-35 (230V) (59413)
Mass Combi 24/1800-35 (230V)

Continuous power and peace of mind in all conditions

The renewed Mass Combi offers the best price/quality ratio. Based on the exceptionally reliable Mass Combiseries, the four new models now offer even more power at a highly competitive price. In addition, they arealso available in two customer-friendly variations with remote control or MasterBus.

The powerful 3-step+ battery charger guarantees maximum battery life and can simultaneously charge twobattery banks. The inverter with high peak power starts even the heaviest loads, with the Mass Combi12/1600 being easily sufficient for your espresso machine. A built-in distribution system switches betweengrid and inverter power, while two separate AC outputs allow users to connect critical loads to a preferredgroup.

Grid connected solar power system with energy storage
The Mass Combi enables the expansion of a grid connected solar power system with energy storage inbatteries. This way the majority of the generated energy is used, and users are less dependent on theelectricity grid. In this setup, the Mass Combi is part of a MasterBus controlled system.

The benefits of the improved Mass Combi:
  • Compact, lightweight and no hum thanks to HF technology
  • High yield and more power from your batteries
  • Intelligent 3-step+ battery charger with low DC ripple current for fast charging times and long battery life
  • Charges two individual battery banks simultaneously
  • Quiet, powerful inverter with 200 % peak power
  • Power Assist: extra power assistance from the batteries in case of limited grid or generator power(prevents blown fuses)
  • Pure sine wave energy prevents failures and damage to sensitive equipment such as adapters
  • Dual AC outputs to separate critical equipment from heavy loads
  • Professional connections ensure fast installation and operational security
  • CE approved and E-marking for mobile applications


Specifications

Specifications Sine Wave Inverter
  • Nomimal DC voltage: 24 V (19-31 V)
  • Output voltage: 230 V (± 5 %), adjustable 180-250 V 50/60 Hz (± 0.05 %)
  • Output waveform: true sine, Thd < 2.5 % under standard conditions
  • Continuous power at 25°C / 77°F, cos phi 1: 1800 W
  • Max. peak load: 3000 W
  • Max. efficiency: >= 90 %
  • Parallel configuration: no
  • Synchronize with mains/generator: yes


Specifications Battery Charger
  • Input voltage range: 180-265 V
  • Max. input current: 5.2 A
  • Max. charge current at 25°C / 77°F: 35 A at 28.5 V
  • Secondary charger output current: 5 A
  • Battery temperature sensor: yes, included


Specifications Transfer System
  • AC output 1: 25 A (short break output)
  • AC output 2: 50 A (power output)
  • Transfer speed: half seamless (25 ms max., 10 ms typical)

General Specifications
  • Display/read-out: LED display
  • Dimensions, HxWxD: 14.6 x 12.5 x 5.6 inch
  • Weight: 17.2 lb
  • Approvals: CE, ABYC, E4


Technical Specifications
  • Charge characteristic: IUoUo, automatic / 3-step+ for gel/AGM/MLI/wet/spiral/traction
  • Ground relay: yes, configurable
  • Temperature range (ambient temp.): -25°C to 60°C, derating > 25°C-13 to 140°F
  • Protection degree: IP23 (vertical mounting)
  • Protections: over temperature, overload, short circuit, high/low battery voltage
  • Cooling: maintenance-free vario fans
  • MasterBus compatible: yes, in combination with a MasterBus Combi Interface

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$2,476.39
59414XL.jpg
Mastervolt - Mastervolt Mass Combi 24/2600-60 (230V) (59414)
Mass Combi 24/2600-60 (230V)

Continuous power and peace of mind in all conditions

The renewed Mass Combi offers the best price/quality ratio. Based on the exceptionally reliable Mass Combiseries, the four new models now offer even more power at a highly competitive price. In addition, they arealso available in two customer-friendly variations with remote control or MasterBus.

The powerful 3-step+ battery charger guarantees maximum battery life and can simultaneously charge twobattery banks. The inverter with high peak power starts even the heaviest loads, with the Mass Combi12/1600 being easily sufficient for your espresso machine. A built-in distribution system switches betweengrid and inverter power, while two separate AC outputs allow users to connect critical loads to a preferredgroup.

Grid connected solar power system with energy storage
The Mass Combi enables the expansion of a grid connected solar power system with energy storage inbatteries. This way the majority of the generated energy is used, and users are less dependent on theelectricity grid. In this setup, the Mass Combi is part of a MasterBus controlled system.

The benefits of the improved Mass Combi:
  • Compact, lightweight and no hum thanks to HF technology
  • High yield and more power from your batteries
  • Intelligent 3-step+ battery charger with low DC ripple current for fast charging times and long battery life
  • Charges two individual battery banks simultaneously
  • Quiet, powerful inverter with 200 % peak power
  • Power Assist: extra power assistance from the batteries in case of limited grid or generator power(prevents blown fuses)
  • Pure sine wave energy prevents failures and damage to sensitive equipment such as adapters
  • Dual AC outputs to separate critical equipment from heavy loads
  • Professional connections ensure fast installation and operational security
  • CE approved and E-marking for mobile applications


Specifications

Specifications Sine Wave Inverter
  • Nomimal DC voltage: 24 V (19-31 V)
  • Output voltage: 230 V (± 5 %), adjustable 180-250 V 50/60 Hz (± 0.05 %)
  • Output waveform: true sine, Thd < 2.5 % under standard conditions
  • Continuous power at 25°C / 77°F, cos phi 1: 2550 W
  • Max. peak load: 4000 W
  • Max. efficiency: >= 90 %
  • Parallel configuration: yes, up to 2 units
  • Synchronize with mains/generator: yes


Specifications Battery Charger
  • Input voltage range: 180-265 V
  • Max. input current: 8.5 A
  • Max. charge current at 25°C / 77°F: 60 A at 28.5 V
  • Secondary charger output current: 5 A
  • Battery temperature sensor: yes, included


Specifications Transfer System
  • AC output 1: 25 A (short break output)
  • AC output 2: 50 A (power output)
  • Transfer speed: half seamless (25 ms max., 10 ms typical)

General Specifications
  • Display/read-out: LED display
  • Dimensions, HxWxD: 19.5 x 12.5 x 6.1 inch
  • Weight: 24.3 lb
  • Approvals: CE, ABYC, E4


Technical Specifications
  • Charge characteristic: IUoUo, automatic / 3-step+ for gel/AGM/MLI/wet/spiral/traction
  • Ground relay: yes, configurable
  • Temperature range (ambient temp.): -25°C to 60°C, derating > 25°C-13 to 140°F
  • Protection degree: IP23 (vertical mounting)
  • Protections: over temperature, overload, short circuit, high/low battery voltage
  • Cooling: maintenance-free vario fans
  • MasterBus compatible: yes, in combination with a MasterBus Combi Interface

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Out of Stock
$3,097.43
59477XL.jpg
Xantrex - Xantrex Freedom HFS 1000 Inverter Charger Pure Sign Wave 1000W - 55 Amp (59477)
Freedom HFS 1000 Inverter/Charger Pure Sine Wave 1000W - 55 Amp - 12V

True sine wave 120 VAC inverter/charger with built-in transfer switch. Designed for recreational and commercial applications.

The Freedom HFS is equipped with quick-connect AC terminals, ignition control capability and programmable smart battery management logic. The quick-connect AC terminal on both AC input and output enables incredibly easy installation. The ignition control feature minimizes unintended battery drain. The new Freedom HFS is designed for cold harsh winter environment with temperature performance down to -20C.

The Freedom HFS Inverter/Charger features true sine wave output and is designed to operate sensitive electronics like entertainment systems and appliances in boats, RV's and commercial trucks. The Freedom HFS is available in two models: 1000 watts with a 55-amp charger and a 2000 watts with a 55-amp charger.

Product Features:
  • Input Voltage: 12V
  • AC Output: GFCI and/or Hardwire
  • 1000 watts continuous AC power
  • Powerful fast charging 55 amp, 12 Vdc multi-stage charger
  • 2X continuous power surge for demanding loads
  • Cold temperature performance down to - 20C for the harsh winter environments
  • Quality, reliability and safety that meets stringent CSA and UL458 with marine supplement standard
  • Configurable Ignition control that helps to minimize battery drain
  • Dead battery charging down to 0 Vdc
  • Quick connect AC terminal block for fast and reliable installation
  • Detachable remote panel for convenient system status monitoring


Protection Features:
  • Programmable Smart Battery Management logic to facilitate extended battery use & life.
  • Overload, over temperature, under/over voltage protection

WarningWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

$595.65
71933XL.jpg
Samlex America - Samlex Evolution™ F Series 1200W, 120V Pure Sine Wave Inverter/Charger w/12V Input & 40 Amp Charger (71933)

Evolution™ F Series 1200W, 120V Pure Sine Wave Inverter/Charger with 12V Input & 40 Amp Charger

Pure sine wave inverter/charger with 6 programmable charging profiles – 2, 3 and 4 stages with Equalization. For use with Lead Acid or Lithium Batteries. Samlex Evolution™ Series inverter/chargers provide reliable AC power wherever it’s needed. For use with boats, RVs, cabins and specialty vehicles, as well as alternative energy, back-up and emergency power applications.

Adaptive Battery Charger Option for Lead Acid Batteries

  • 6 programmable charging profiles – 2, 3 and 4 stages with Equalization
  • Algorithm monitoring in the Bulk Stage assesses the battery’s condition. The remaining charging stages are based on the battery’s condition rather than a pre-set charging time.
  • Reduces excess charging time and extends life of battery

Transfer Switch

  • Zero transfer time when switching from Inverter to AC input source. When AC input source comes on, the inverter synchronizes with the incoming wave form and then transfers instantl