De-icers , Winterizing

Sort By:  
16200.gif
Ice Eater by The Power House - Ice Eater by The Power House 1/2HP Ice Eater w/25' Cord - 115V (16200)
1/2HP Ice Eater with 25' Cord - 115V

Features:
  • 1/2HP energy efficient high quality motor with 28 pounds thrust
  • 5.0 Amps, 115V, 1 phase, 60/50 cycle
  • 25' quick change power cord
  • 2 - 25' x 3/8 hollow braided mooring lines with shackles
  • Dimensions of shipping box 12-5/8 x 12-5/8 x 12-3/4
  • Weight 36 lbs
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
  • Motor shaft is 316 stainless steel, the best material for salt water application
  • Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor. Motor and capacitor are matched for ultimate performance
  • Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid. Additional double lip shaft seal for extra protection
  • Stator motor windings have double impregnation of baked insulating varnish
  • 2 heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
  • Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
  • Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
  • 25' of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
  • Heavy duty PVC custom brackets that attach motor to shroud. All stainless bolts and locking aircraft nuts are used.
  • Performance certified tested at our facility for proper output and leaks before shipment
  • Best 3-Year limited warranty in the marketplace
  • Comes complete, just open the box, remove and install
  • Optional thermostat custom design turns Ice Eater on when needed; Ideal for unattended application
$619.99
16201XL.jpg
Ice Eater by The Power House - Ice Eater by The Power House 3/4HP Ice Eater w/25' Cord - 115V (16201)
3/4HP Ice Eater with 25' Cord - 115V

Features:
  • 3/4HP energy efficient high quality motor with 36 pounds thrust
  • 4.7 Amps, 115V, 1 phase, 60/50 cycle
  • 25' quick change power cord
  • 2 - 25' x 3/8 hollow braided mooring lines with shackles
  • Dimensions of shipping box 14-1/2 x 14-1/2 x 16-1/8
  • Weight 45 lbs
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
  • Motor shaft is 316 stainless steel, the best material for salt water application
  • Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
  • Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid; Additional double lip shaft seal for extra protection
  • Stator motor windings have double impregnation of baked insulating varnish
  • 2 heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
  • Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
  • Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
  • 25' of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
  • Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
  • Performance certified tested at our facility for proper output and leaks before shipment
  • Best three-year limited warranty in the marketplace
  • Comes complete, just open the box, remove and install
  • Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application
Out of Stock
$725.86
16202XL.jpg
Ice Eater by The Power House - Ice Eater by The Power House 1HP Ice Eater w/25' Cord - 115V (16202)
1HP Ice Eater with 25'Cord - 115V

Features:
  • 1HP energy efficient high quality motor
  • 115V, 7.0 Amps, 1 phase, 60/50 cycle
  • 25' quick change power cord
  • 2 - 25' x 3/8 hollow braided mooring lines with shackles
  • Dimensions of shipping box, 14-1/2 x 14-1/2 x 16-1/8
  • Shipping weight 45 lbs
  • For large boats, marinas and heavier uses
  • Can be used in place of several smaller units
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NMEA specifications and is UL and CSA compliant, and C.E. certified
  • Motor shaft is 316 stainless steel, the best material for salt water application
  • Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
  • Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid Additional double lip shaft seal for extra protection
  • Stator motor windings have double impregnation of baked insulating varnish
  • 2 heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
  • Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
  • Propeller is custom designed for maximum thrust and performance Propeller screws on shaft for easy removal and replacement
  • 25' of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
  • Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
  • Performance certified tested at our facility for proper output and leaks before shipment
  • Best three year limited warranty in the marketplace
  • Comes complete, just open the box, remove and install
  • Optional thermostat custom design turns Ice Eater on when needed; Ideal for unattended application
$731.59
16453XL.jpg
Ice Eater by The Power House - Ice Eater by The Power House 1HP Ice Eater w/25' Cord - 230V (16453)
1HP Ice Eater with 25' Cord - 230V

Features:
  • 1HP energy efficient high quality motor
  • 230V, 3.5 Amps, 1 phase, 60/50 cycle
  • 25' quick change power cord
  • 2 - 25' x 3/8 hollow braided mooring lines with shackles
  • Dimensions of shipping box, 14-1/2 x 14-1/2 x 16-1/8
  • Shipping weight 45 lbs
  • For large boats, marinas and heavier uses
  • Can be used in place of several smaller units
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NMEA specifications and is UL and CSA compliant, and C.E. certified
  • Motor shaft is 316 stainless steel, the best material for salt water application
  • Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
  • Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid Additional double lip shaft seal for extra protection
  • Stator motor windings have double impregnation of baked insulating varnish
  • 2 heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
  • Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
  • Propeller is custom designed for maximum thrust and performance Propeller screws on shaft for easy removal and replacement
  • 25' of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
  • Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
  • Performance certified tested at our facility for proper output and leaks before shipment
  • Best 3-Year limited warranty in the marketplace
  • Comes complete, just open the box, remove and install
  • Optional thermostat custom design turns Ice Eater on when needed; Ideal for unattended application
Out of Stock
$788.23
16456XL.jpg
Ice Eater by The Power House - Ice Eater by The Power House 3/4HP Ice Eater 230V (16456)
Ice Eater P750

  • 3/4 H.P. energy efficient high quality motor with 36 pounds thrust
  • 2.5 amps, 230 volt, one phase, 60/50 cycle
  • 25 foot quick change power cord
  • Two 25 foot x 3/8 hollow braided mooring lines with shackles
  • Dimensions of shipping box 14 1/2 x 14 1/2 x 16 1/8
  • Weight 45 pounds
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
  • Motor shaft is 316 stainless steel, the best material for salt water application
  • Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
  • Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid; Additional double lip shaft seal for extra protection
  • Stator motor windings have double impregnation of baked insulating varnish
  • Two heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
  • Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
  • Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
  • Twenty-five feet of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
  • Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
  • Performance certified tested at our facility for proper output and leaks before shipment
  • Best three-year limited warranty in the marketplace
  • Comes complete, just open the box, remove and install
  • Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application
Out of Stock
$725.86
25420XL.jpg
Ice Eater by The Power House - Ice Eater by The Power House 3/4HP Ice Eater w/100' Cord - 115V (25420)
3/4HP Ice Eater with 100' Cord - 115V

Features:
  • 3/4HP energy efficient high quality motor with 36 lbs thrust
  • 4.7 Amps, 115V, 1 phase, 60/50 cycle
  • 100' power cord
  • 2 - 25' x 3/8 hollow braided mooring lines with shackles
  • Dimensions of shipping box 14-1/2 x 14-1/2 x 16-1/8
  • Weight 45 lbs
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NMEA specifications and is UL and CSA compliant, and C.E. certified
  • Motor shaft is 316 stainless steel, the best material for salt water application
  • Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
  • Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid; Additional double lip shaft seal for extra protection
  • Stator motor windings have double impregnation of baked insulating varnish
  • 2 heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
  • Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
  • Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
  • 100' of 16/3 water and oil resistant cord with 3 prong molded plug is standard; Additional length cord available: 25' and 50'
  • Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
  • Performance certified tested at our facility for proper output and leaks before shipment
  • Best 3-Year limited warranty in the marketplace
  • Comes complete, just open the box, remove and install
  • Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application
$686.95
59432XL.jpg
Tecnoseal - Tecnoseal De-Icer Aerator Anode - .63" Shaft - Zinc (59432)
De-Icer Aerator Anode - 0.63" Post Holder - Zinc

  • Zinc
  • .33lbs
  • Height:1.26"
  • Ø-1.50"
  • Ø 1- 0.63"
  • Hardware included
$7.08
59433XL.jpg
Tecnoseal - Tecnoseal De-Icer Aerator Anode - 0.50" Shaft - Zinc (59433)
De-Icer Aerator Anode - 0.50" Shaft Zinc

  • Zinc
  • .32lbs
  • Height:1.26"
  • Ø-1.50"
  • Ø 1- 0.50"
  • Hardware included
$5.15
59576XL.jpg
Ice Eater by The Power House - Ice Eater by The Power House 120V Thermostat f/Salt or Fresh Water w/Adjustable Temperature Settings (0° to 80°) (59576)
120V Thermostat for Salt or Fresh Water with Adjustable Temperature Settings (0° to 80°)

Ice Eater by The Power House KT16110 heavy duty 120Volt adjustable thermostat for fresh and saltwater applications. Temperature range is 0 to 80°.

Ice Eater's weatherproof line voltage 2 stage thermostat is great for direct control of heaters , fans , air conditioners , ventilation equipment and more. Great for both heating and cooling.

Not effected by surges and lightning strikes or power outages like a digital thermostat.

Capillary controlled component gives accurate +/- 2 degrees accuracy.

A graduated temperature control unit that can be used anywhere . Clear cover protects from weather and damage. Weatherproof and corrosion proof with all polycarbonate thermoplastic construction and stainless steel capillary sensor.

Thermostats are ambient air temps.

*UL listed MADE IN USA
$77.13
63447XL.jpg
Ice Eater by The Power House - Ice Eater - Large Dock Mount (63447)
Large Dock Mount

Dock Mount attaches to your dock or pole and directs the flow of water from
the Ice Eater in any direction.

Specifically Fits: .75-hp & 1-hp models

Parts Included in Dock Mount Box:
  • (1) Shroud Assembly
  • (1) Bale
  • (1) 3/8" x 2" Clevis Pin & Clip
  • (2) 1/2" x 1" Clevis Pin & Clip
  • (4) 1-1/4" Flat Washer
  • (1) Tightening Handle
  • (1) Base
  • (3) 1/2" x 1-1/4" Bolt
  • (3) 1/2" Lockwasher
  • (3) 1/2" Nut
  • (1) Pipe Holder


What You Need to Provide:
  • 1-5/16" galvanized or stainless steel pipe (max. length 6')
  • U-bolts or Lag Screws (for securing dock mount)
Out of Stock
$226.83
63452XL.jpg
Ice Eater by The Power House - Ice Eater - Small Dock Mount (63452)
Small Dock Mount

Dock Mount attaches to your dock or pole and directs the flow of water from
the Ice Eater in any direction.

Specifically Fits: P500 models

Parts Included in Dock Mount Box:
  • (1) Shroud Assembly
  • (1) Bale
  • (1) 3/8" x 2" Clevis Pin & Clip
  • (2) 1/2" x 1" Clevis Pin & Clip
  • (4) 1-1/4" Flat Washer
  • (1) Tightening Handle
  • (1) Base
  • (3) 1/2" x 1-1/4" Bolt
  • (3) 1/2" Lockwasher
  • (3) 1/2" Nut
  • (1) Pipe Holder


What You Need to Provide:
  • 1-5/16" galvanized or stainless steel pipe (max. length 6')
  • U-bolts or Lag Screws (for securing dock mount)

Out of Stock
$226.83
68054XL.jpg
Tecnoseal - Tecnoseal De-Icer Anode - .63" Aluminum - 5/8" Shaft - 1HP (68054)

De-Icer Anode - .63" Aluminum - 5/8" Shaft - 1HP

Features:

  • De-Icer Anode
  • .63"
  • Aluminum
  • 5/8" Shaft
  • 1HP
$7.42
68055XL.jpg
Tecnoseal - Tecnoseal De-Icer Anode - .50" Aluminum - 1/2" Shaft - .5HP/.75HP (68055)

De-Icer Anode - .50" Aluminum - 1/2" Shaft - .5HP/.75HP

Features:

  • De-Icer Anode
  • .50"
  • Aluminum
  • 1/2" Shaft
  • .5HP/.75HP
Out of Stock
$5.39
69621XL.jpg
Ice Eater by The Power House - Ice Eater by The Power House Replacement Propeller f/All Models Except 1/4HP (69621)

Replacement Propeller for All Models Except 1/4HP

Ice Eater's Replacement Propeller for all models except the 1/4HP.

$24.95
69622XL.jpg
Ice Eater by The Power House - Ice Eater by The Power House Aluminum Anode - 1/2" Diamater - Fits All Models (69622)

Aluminum Anode - 1/2" Diamater - Fits All Models

Features:

  • Recommended for use in salt water
  • Sacrificial Aluminum Alloy Anode to protect against electrolysis
  • Allen Wrench is included
  • One size fits all The Power House, Inc.’s Ice Eater shafts
$12.70
69623XL.jpg
Ice Eater by The Power House - Ice Eater by the Power House Replacement Power Cord - 25' (69623)

Replacement Power Cord - 25'

Ice Eater by The Power House 25' Replacement Power cord for use with Ice Eater units.

$72.59
69624XL.jpg
Ice Eater by The Power House - Ice Eater by The Power House Replacement Power Cord - 50' (69624)

Replacement Power Cord - 50'

Ice Eater by The Power House 50'' Replacement Power cord for use with Ice Eater units.

Out of Stock
$90.73
69625XL.jpg
Ice Eater by The Power House - Ice Eater by The Power House Replacement Cord - 100' (69625)

Replacement Power Cord - 100"

Ice Eater by The Power House 100' Replacement Power cord for use with Ice Eater units.

$113.41
69626XL.jpg
Ice Eater by The Power House - Ice Eater by The Power House Replacement Power Cord - 150' (69626)

Replacement Power Cord - 150'

Ice Eater by The Power House 150' Replacement Power cord for use with Ice Eater units.

$167.86
69627XL.jpg
Ice Eater by The Power House - Ice Eater by The Power House Screen Kit f/P750, P1000, F500, F750DP & F1000DP (69627)

Screen Kit for P750, P1000, F500, F750DP & F1000DP

Helps prevent debris damage. Can be used on bottom or top or both as needed by area conditions.

$19.06
69628XL.jpg
Ice Eater by The Power House - Ice Eater by the Powerhouse Screen Kit f/P500 (69628)

Screen Kit for P500

Helps prevent debris damage. Can be used on bottom or top or both as needed by area conditions.

$17.35
69629XL.jpg
Ice Eater by The Power House - Ice Eater by The Power House T104P Timer - 1-12 Settings Per Day w/2 Trippers - 230V (69629)

T104P Timer - 1-12 Settings Per Day w/2 Trippers - 230V

Features:

  • Intermatic 230V
  • 24-hour repeating
  • 1-12 ON/OFF settings per day
  • 2 sets of trippers
Out of Stock
$181.46
69631XL.jpg
Ice Eater by The Power House - Ice Eater by The Power House Replacement Propeller f/F250 & P250 (69631)

Replacement Propeller for F250 & P250

Ice Eater's replacement propeller specifically for F250 and P250.

Out of Stock
$24.95
69632XL.jpg
Ice Eater by The Power House - Ice Eater by The Powerhouse Electrolysis Kit (69632)

Electrolysis Kit

For area of high salinity, electrical current and/or warm temperatures.

Out of Stock
$16.33
70015XL.jpg