Calipers & Bullet Measuring

Sort By:  
Lyman - Digital Lead Thermometer - Digital Lead Thermometer 6" K-Type Thermocouple, Fahrenheit/Celsius, - (011516277978)

the lyman digital lead thermometer is a fast and accurate way to check the temperature of your casting alloy. the long 6 probe will work with the largest casting furnaces and keep your hand away from molten lead. the large easy to read display can be set for fahrenheit or celsius and also features a hold button to lock a reading on the display.

features:

- fast and accurate
- 6 long probe to work with large furnaces
- easy to read display
- fahrenheit or celsius

specifications:

- power: one 9-volt battery
- temp range: -50 to 1832 degrees f / -50 to 1000 degrees celsius
- accuracy: 0.5 percent +/-2 degrees fahrenheit / 0.5 percent +/- 1 degree celsius
- measurement rate: 2.5 measurements per second
- probe: k-type thermocouple
- low battery indicator: bt displayed when the battery voltage drops below operating range
- battery life: 200 hrs


  • digital lead thermometer

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$17.54
115270
Lyman - 4500 Lube Szr with Heater 115V - 4500 Lube Sizer with Heater 115V -

Lubricate and size your cast bullets in one easy step. The 4500 Lube Sizer is the best bullet lubing system available anywhere. Just add the appropriate H&I Sizing Die and Top Punch for the bullet.

Features:

- Solid one piece bottom casting-use with hard bullet lubricants
- 115 volt heater
- A longer ball knob handle for more leverage for sizing and lubricating the largest bullets
- Complete with Gas check seater and complimentary lube

Out of Stock
$204.04
115961
Lyman - 30-06 Case Length/Headspace Gauge - 30-06 Case Length/Headspace Gauge -

To achieve the highest degree of safety and accuracy, Lyman recommends that all bottleneck rifle cases be inspected after resizing to ensure that the proper headspace dimension is maintained. The best way to check this critical dimension is with a Lyman case length/headspace gauge. The reloader simply inserts the case into the gauge to insure that it does not exceed the maximum or fall below the minimum allowable headspace. In addition, the gauge will identify a case which exceeds the maximum allowable case length. Caution: Any case found with excessive headspace should be destroyed immediately.

Specifications:

- Caliber: .30-06 Springfield
- Weight: 8 oz.

Out of Stock
$16.37
115963
Lyman - 223 Case Length/Headspace Gauge - 223 Case Length/Headspace Gauge -

To achieve the highest degree of safety and accuracy, Lyman recommends that all bottleneck rifle cases be inspected after resizing to ensure that the proper headspace dimension is maintained. The best way to check this critical dimension is with a Lyman case length/headspace gauge. The reloader simply inserts the case into the gauge to insure that it does not exceed the maximum or fall below the minimum allowable headspace. In addition, the gauge will identify a case which exceeds the maximum allowable case length. Caution: Any case found with excessive headspace should be destroyed immediately.

Specifications:

- Caliber: .223
- Weight: 8 oz.

Out of Stock
$21.53
115964
Lyman - 22-250 Case Length/Headspace Gauge - 22-250 Case Length/Headspace Gauge -

To achieve the highest degree of safety and accuracy, Lyman recommends that all bottleneck rifle cases be inspected after resizing to ensure that the proper headspace dimension is maintained. The best way to check this critical dimension is with a Lyman case length/headspace gauge. The reloader simply inserts the case into the gauge to insure that it does not exceed the maximum or fall below the minimum allowable headspace. In addition, the gauge will identify a case which exceeds the maximum allowable case length. Caution: Any case found with excessive headspace should be destroyed immediately.

Specifications:

- Caliber: .22-250 Remington
- Weight: 8 oz.

Out of Stock
$16.37
115965
Lyman - 270 Win Case Length/Headspace Gauge - 270 Win Case Length/Headspace Gauge -

To achieve the highest degree of safety and accuracy, Lyman recommends that all bottleneck rifle cases be inspected after resizing to ensure that the proper headspace dimension is maintained. The best way to check this critical dimension is with a Lyman case length/headspace gauge. The reloader simply inserts the case into the gauge to insure that it does not exceed the maximum or fall below the minimum allowable headspace. In addition, the gauge will identify a case which exceeds the maximum allowable case length. Caution: Any case found with excessive headspace should be destroyed immediately.

Specifications:

- Caliber: .270 Winchester
- Weight: 8 oz.

Out of Stock
$16.37
115966
Lyman - 50 BMG Case Length/Headspace Gauge - 50 BMG Case Length/Headspace Gauge -

To achieve the highest degree of safety and accuracy, Lyman recommends that all bottleneck rifle cases be inspected after resizing to ensure that the proper headspace dimension is maintained. The best way to check this critical dimension is with a Lyman case length/headspace gauge. The reloader simply inserts the case into the gauge to insure that it does not exceed the maximum or fall below the minimum allowable headspace. In addition, the gauge will identify a case which exceeds the maximum allowable case length. Caution: Any case found with excessive headspace should be destroyed immediately.

Specifications:

- Caliber: 50 BMG
- Weight: 8 oz.

Out of Stock
$30.76
115967
Lyman - 9mm Luger Pistol Max Cartridge Gauge - 9mm Luger Pistol Max Cartridge Gauge -

Lyman maximum cartridge gauges check all critical dimensions of pistol ammunition to insure proper functioning. These precision made gauges allow the reloader to check the case length, diameter and overall cartridge length of pistol ammunition. This inspection is considered mandatory by top competitive shooters who demand 100% reliability for their competition ammo.

- Caliber: 9mm Luger Pistol

Out of Stock
$16.14
115968
Lyman - 45 A.C.P. Pistol Max Cartridge Gauge - 45 A.C.P. Pistol Max Cartridge Gauge -

Lyman maximum cartridge gauges check all critical dimensions of pistol ammunition to insure proper functioning. These precision made gauges allow the reloader to check the case length, diameter and overall cartridge length of pistol ammunition. This inspection is considered mandatory by top competitive shooters who demand 100% reliability for their competition ammo.

Specifications:

- Caliber: .45 ACP Pistol
- Weight: 8 oz.

Out of Stock
$12.27
115969
Lyman - 40 S & W Pistol Max Cartridge Gauge - 40 S&W Pistol Max Cartridge Gauge -

Lyman maximum cartridge gauges check all critical dimensions of pistol ammunition to insure proper functioning. These precision made gauges allow the reloader to check the case length, diameter and overall cartridge length of pistol ammunition. This inspection is considered mandatory by top competitive shooters who demand 100% reliability for their competition ammo.

Specifications:

- Caliber: 40 Smith & Wesson
- Weight: 8 oz.

Out of Stock
$12.27
115970
Lyman - 44 Magnum Pistol Max Cartridge Gauge - 44 Magnum Pistol Max Cartridge Gauge -

Lyman maximum cartridge gauges check all critical dimensions of pistol ammunition to insure proper functioning. These precision made gauges allow the reloader to check the case length, diameter and overall cartridge length of pistol ammunition. This inspection is considered mandatory by top competitive shooters who demand 100% reliability for their competition ammo.

Specifications:

- Caliber: .44 Magnum Pistol
- Weight: 8 oz.

Out of Stock
$16.14
115971
Lyman - 380 Auto Pistol Max Cartridge Gauge - 380 Auto Pistol Max Cartridge Gauge -

Lyman maximum cartridge gauges check all critical dimensions of pistol ammunition to insure proper functioning. These precision made gauges allow the reloader to check the case length, diameter and overall cartridge length of pistol ammunition. This inspection is considered mandatory by top competitive shooters who demand 100% reliability for their competition ammo.

Specifications:

- Caliber: .380 ACP
- Weight: 8 oz.

Out of Stock
$12.27
246867
Lyman - Chamber Checker Rifle 2 Large Rifle - Chamber Checker - Rifle 1, Large Rifle

Lyman Ammo Large Rifle Gauge Checker

Lyman's Ammo Checkers check the quality and consistency of both reloaded rounds and purchased ammo. A must for any auto shooter for easy and consistent feed. You can't afford misfeeds, so get the easiest "no-go" gauge available today!

These Ammo Checkers are gauges that allow a reloader to quickly confirm that their ammunition will fit in their chamber. Machined from solid blocks of 6061 T6 aircraft grade aluminum and cut with custom tooling to SAAMI minimum chamber dimensions. Ammo Checkers are available in three designs covering most common handgun and rifle calibers. One gauge will work with a variety of calibers. Just drop your loaded rounds in the ammo checker and if the round fits into the gauge, it will fit in the gun's chamber. Each caliber is clearly engraved on the gauge. Bright orange anodizing makes them easy to find on your reloading bench.

Specifications:

- Fits: .243 Winchester, .270 Winchester, .30-30 Winchester, .300 WSM
- Weight: 1 lb.

Out of Stock
$27.82
246868
Lyman - Chamber Checker Rifle 1 Small Rifle - Chamber Checker - Rifle 1, Small Rifle

Lyman Ammo Small Rifle Gauge Checker

Lyman's Ammo Checkers check the quality and consistency of both reloaded rounds and purchased ammo. A must for any auto shooter for easy and consistent feed. You can't afford misfeeds, so get the easiest "no-go" gauge available today!

These Ammo Checkers are gauges that allow a reloader to quickly confirm that their ammunition will fit in their chamber. Machined from solid blocks of 6061 T6 aircraft grade aluminum and cut with custom tooling to SAAMI minimum chamber dimensions. Ammo Checkers are available in three designs covering most common handgun and rifle calibers. One gauge will work with a variety of calibers. Just drop your loaded rounds in the ammo checker and if the round fits into the gauge, it will fit in the gun's chamber. Each caliber is clearly engraved on the gauge. Bright orange anodizing makes them easy to find on your reloading bench.

Specifications:

- Fits: .204 Ruger, .22 Hornet, .223 Remington, .22-250, .300 AAC Blackout, 7.62x39
- Weight: 1 lb.

Out of Stock
$36.16
246872
Lyman - Chamber Checker Pistol/Revolver - Chamber Checker - Pistol/Revolver

Lyman Ammo Handgun Gauge Checker

Lyman's Ammo Checkers check the quality and consistency of both reloaded rounds and purchased ammo. A must for any auto shooter for easy and consistent feed. You can't afford misfeeds, so get the easiest "no-go" gauge available today!

These Ammo Checkers are gauges that allow a reloader to quickly confirm that their ammunition will fit in their chamber. Machined from solid blocks of 6061 T6 aircraft grade aluminum and cut with custom tooling to SAAMI minimum chamber dimensions. Ammo Checkers are available in three designs covering most common handgun and rifle calibers. One gauge will work with a variety of calibers. Just drop your loaded rounds in the ammo checker and if the round fits into the gauge, it will fit in the gun's chamber. Each caliber is clearly engraved on the gauge. Bright orange anodizing makes them easy to find on your reloading bench.

Specifications:

- Fits: 380 Auto, 9mm Luger, 38 Super, 40 Smith & Wesson, 45 ACP, 38/357, 44 Magnum/Special, 45 Colt
- Weight: 1 lb.

Out of Stock
$21.97
8020
Hornady - Steel Dial Caliper - Caliper - 6" Dial, Stainless Steel

The Hornady Dial Caliper is perfect for a reloader looking for a tool to precisely measure case and bullet length, inside and outside diameters, primer pocket depth, overall cartridge length, and more. Comes packaged in a protective plastic case included.

ASpecifications:

- Type: Dial Caliper
- Function: Measuring Lengths
- Accuracy: .001"
- Range: 0-6"

Notes:

- Knob at bottom of dial face can be loosened to allow face to turn and thereby 'zero' the caliper
- The screw should then be tightened to keep the setting
- Knob at top of caliper can be tightened to lock down a measurement

Out of Stock
$33.68
40103
Lyman - Electronic Digital Caliper - Electronic Caliper -

The Electronic Stainless Steel Caliper features a high tech design with direct digital readout. Switch back and forth from inches to millimeters with the touch of a button. Hold setting plus on/off switch. Accurate to .001"/0.1mm. Comes in handy plastic storage case.

Specifications:

- Weight: 11 oz.

Out of Stock
$23.40
54415
Lyman - Electr Digital Trigger Pull Gauge - Electronic Digital Trigger Pull Gauge -

State of the art strain gauge technology allows for accuracy to 1/10 ounce over a working range of 0 to 12 pounds. The Digital Trigger Pull Gauge is equipped with a large, easy to read LCD display and is push button operated for zero, clear and averaging functions. It can also can be converted to read in kilograms. Unlike other gauges, there are no weights or sliding pointers to worry about. Simply place the gauge on the trigger and pull! Lyman's Digital Trigger Pull Gauge accurately records the results. You can also take multiple readings and the Digital Trigger Pull Gauge will tell you the average weight for the string. This is the perfect tool for target shooters, silhouette shooters, gunsmiths, hunters or anyone who wants to adjust their trigger pull weights accurately and easily.

Specifications:

- Weight: 1.2 lbs.

Out of Stock
$36.28
73167
RCBS - Vernier Micrometer 0-1" - Vernier Micrometer 0-1" -

The RCBS 1" Vernier Micrometer is a great tool for reloaders wanting to measure the thickness of their brass or measure the wall thickness of other materials quickly and precisely.

Specifications:

- Type: Vernier Micrometer
- Function: Measure thickness and uniformity
- Accuracy: .0001"
- Range: 0-1"
- Warranty: RCBS Limited Lifetime
- Includes: Adjustment wrench and fitted plastic case
- Features: Thimble lock for measuring constants
- One piece steel frame

$26.11
76383
Lyman - 308 Win Case Length/Headspace Gau - 308 Win Case Length/Headspace Gauge -

To achieve the highest degree of safety and accuracy, Lyman recommends that all bottleneck rifle cases be inspected after resizing to ensure that the proper headspace dimension is maintained. The best way to check this critical dimension is with a Lyman case length/headspace gauge. The reloader simply inserts the case into the gauge to insure that it does not exceed the maximum or fall below the minimum allowable headspace. In addition, the gauge will identify a case which exceeds the maximum allowable case length. Caution: Any case found with excessive headspace should be destroyed immediately.

Specifications:

- Caliber: .308 Winchester
- Weight: 8 oz.

Out of Stock
$16.37
351123
Lyman - 10mm Auto Pistol Max Cartridge Gauge - Auto Pistol Max Cartridge Gauge, 10mm -

Lyman Maximum Cartridge Gauges check all critical dimensions of handgun ammunition to ensure proper functioning. These precision made gauges allow the reloader to check the case length, diameter and overall cartridge length. This inspection is considered mandatory by top competitive shooters who demand 100% reliability for their competition ammunition.

Specifications:

- Caliber: 10mm Auto

Out of Stock
$12.27
351124
Lyman - 224 Valkyrie Case Length/Headspace Gauge - Case Length/Headspace Gauge, .224 Valkyrie -

The Lyman Case Length Headspace Gauge is perfect for reloaders looking to achieve the highest degree of safety and accuracy. Lyman recommends that all cases be inspected after resizing to ensure that the proper headspace dimension is maintained. Simply insert the case into the gauge to check that it does not exceed the maximum or fall below the minimum allowable headspace. If the case exceed the maximum allowable case length the case mouth will exceed the length of the gauge.

Features:

- Quickly identifies cases that fall above or below allowable headspace

Specifications:

- Caliber: .224 Valkyrie
- Material: Steel

Note: Also checks for cases that exceed the maximum allowable case length

Out of Stock
$16.37
351125
Lyman - Ammo Checker Single 6.8 Rem SPC - Single Caliber Ammo Checker - 6.8mm Remington SPC

Lyman Ammo Checkers verify the quality and consistency of both reloaded and factory ammunition. They are machined from solid aluminum and cut with custom tooling to SAAMI minimum chamber tolerances. Just drop your cartridge into the gauge and if it fits, it will chamber in your gun. Each gauge is clearly marked for caliber and is anodized in a bright orange color so they will be easy to spot on your reloading bench.

Specifications:

- Caliber: 6.8mm Remington SPC
- Material: Aluminum

Out of Stock
$14.59
351126
Lyman - Ammo Checker Single 300 AAC - Single Caliber Ammo Checker - .300 AAC Blackout

Lyman's Ammo Checkers are precision "Go/No Go" gauges that allow a reloader to quickly confirm that their ammunition will fit in their chamber. Gauges are cut to SAAMI (or CIP for non-SAAMI calibers) minimun chamber dimensions. Just drop your loaded rounds in the Ammo Checker, and if the rounds fit into the gauge flush or below the top surface, they will chamber.

Specifications:

- Type: Single Chamber
- Cailber: 300 AAC
- Pack Quantity: 1

Out of Stock
$11.09
351127
Lyman - Ammo Checker Single 450 Bushmaster - Single Caliber Ammo Checker - .450 Bushmaster

Lyman Ammo Checkers verify the quality and consistency of both reloaded and factory ammunition. They are machined from solid aluminum and cut with custom tooling to SAAMI minimum chamber tolerances. Just drop your cartridge into the gauge and if it fits, it will chamber in your gun. Each gauge is clearly marked for caliber and is anodized in a bright orange color so they will be easy to spot on your reloading bench.

Specifications:

- Caliber: .450 Bushmaster
- Material: Aluminum

Out of Stock
$14.59
351128
Lyman - Ammo Checker Single 458 SOCOM - Single Caliber Ammo Checker - .458 Socom

Lyman Ammo Checkers verify the quality and consistency of both reloaded and factory ammunition. They are machined from solid aluminum and cut with custom tooling to SAAMI minimum chamber tolerances. Just drop your cartridge into the gauge and if it fits, it will chamber in your gun. Each gauge is clearly marked for caliber and is anodized in a bright orange color so they will be easy to spot on your reloading bench.

Specifications:

- Caliber: .458 Socom
- Material: Aluminum

Out of Stock
$14.59
351129
Lyman - Ammo Checker Single 50 Beowulf - Single Caliber Ammo Checker - .50 Beowulf

Lyman Ammo Checkers verify the quality and consistency of both reloaded and factory ammunition. They are machined from solid aluminum and cut with custom tooling to SAAMI minimum chamber tolerances. Just drop your cartridge into the gauge and if it fits, it will chamber in your gun. Each gauge is clearly marked for caliber and is anodized in a bright orange color so they will be easy to spot on your reloading bench.

Specifications:

- Caliber: .50 Beowulf
- Material: Aluminum

Out of Stock
$14.59
351130
Lyman - Ammo Checker Single 9mm Luger - Single Caliber Ammo Checker - 9mm Luger

Lyman Ammo Checkers verify the quality and consistency of both reloaded and factory ammunition. They are machined from solid aluminum and cut with custom tooling to SAAMI minimum chamber tolerances. Just drop your cartridge into the gauge and if it fits, it will chamber in your gun. Each gauge is clearly marked for caliber and is anodized in a bright orange color so they will be easy to spot on your reloading bench.

Specifications:

- Caliber: 9mm Luger
- Material: Aluminum

Out of Stock
$14.59
351131
Lyman - Ammo Checker Single 224 Valkryie - Single Caliber Ammo Checker - .224 Valkryie

Lyman Ammo Checkers verify the quality and consistency of both reloaded and factory ammunition. They are machined from solid aluminum and cut with custom tooling to SAAMI minimum chamber tolerances. Just drop your cartridge into the gauge and if it fits, it will chamber in your gun. Each gauge is clearly marked for caliber and is anodized in a bright orange color so they will be easy to spot on your reloading bench.

Specifications:

- Caliber: .224 Valkryie
- Material: Aluminum

Out of Stock
$14.59
351132
Lyman - Ammo Checker Multiple Block 9mm - Ammo Checker Multiple Block - 9mm

Lyman's Ammo Checkers check the quality and consistency of both reloaded rounds and purchased ammo. A must for any auto shooter for easy and consistent feed. You can't afford misfeeds, so get the easiest "no-go" gauge available today!

Lyman’s multi-caliber Ammo Checkers have been extremely popular with reloaders. Now based on demand from customers, Lyman is adding gauges having 8 chambers with all being of the same caliber. These gauges allow reloaders to take multiple cartridges right off the press and check them as they go. If they fit, they will chamber in your gun. Like the multi-caliber blocks, they are machined from solid 6061 aluminum and cut with custom tooling to SAAMI minimum chamber tolerances. A must for any semi-auto shooter, these easy to use “GO” gauges ensure the quality and consistency of your reloaded ammo.

Specifications:

- Cartridge: 9mm Luger
- Material: 6061 Aluminum
- Quantity: 1

Out of Stock
$21.97
351133
Lyman - Ammo Checker Multiple Block 45ACP - Ammo Checker Multiple Block - .45 ACP

Lyman's Ammo Checkers check the quality and consistency of both reloaded rounds and purchased ammo. A must for any auto shooter for easy and consistent feed. You can't afford misfeeds, so get the easiest "no-go" gauge available today!

Lyman’s multi-caliber Ammo Checkers have been extremely popular with reloaders. Now based on demand from customers, Lyman is adding gauges having 8 chambers with all being of the same caliber. These gauges allow reloaders to take multiple cartridges right off the press and check them as they go. If they fit, they will chamber in your gun. Like the multi-caliber blocks, they are machined from solid 6061 aluminum and cut with custom tooling to SAAMI minimum chamber tolerances. A must for any semi-auto shooter, these easy to use “GO” gauges ensure the quality and consistency of your reloaded ammo.

Specifications:

- Cartridge: 45 ACP
- Material: 6061 Aluminum
- Quantity: 1

Out of Stock
$21.97
351134
Lyman - Ammo Checker Multiple Block .223 Rem - Ammo Checker Multiple Block - .223 Remington

Lyman's Ammo Checkers check the quality and consistency of both reloaded rounds and purchased ammo. A must for any auto shooter for easy and consistent feed. You can't afford misfeeds, so get the easiest "no-go" gauge available today!

Lyman’s multi-caliber Ammo Checkers have been extremely popular with reloaders. Now based on demand from customers, Lyman is adding gauges having 8 chambers with all being of the same caliber. These gauges allow reloaders to take multiple cartridges right off the press and check them as they go. If they fit, they will chamber in your gun. Like the multi-caliber blocks, they are machined from solid 6061 aluminum and cut with custom tooling to SAAMI minimum chamber tolerances. A must for any semi-auto shooter, these easy to use “GO” gauges ensure the quality and consistency of your reloaded ammo.

Specifications:

- Cartridge: 223 Remington
- Material: 6061 Aluminum
- Quantity: 1

Out of Stock
$21.97
351135
Lyman - Ammo Checker Single 22-250 - Single Caliber Ammo Checker - .22-250 Remington

Lyman Ammo Checkers verify the quality and consistency of both reloaded and factory ammunition. They are machined from solid aluminum and cut with custom tooling to SAAMI minimum chamber tolerances. Just drop your cartridge into the gauge and if it fits, it will chamber in your gun. Each gauge is clearly marked for caliber and is anodized in a bright orange color so they will be easy to spot on your reloading bench.

Specifications:

- Caliber: .22-250 Remington
- Material: Aluminum

Out of Stock
$14.59
351136
Lyman - Ammo Checker Single .243 Win - Single Caliber Ammo Checker - .243 Winchester

Lyman Ammo Checkers verify the quality and consistency of both reloaded and factory ammunition. They are machined from solid aluminum and cut with custom tooling to SAAMI minimum chamber tolerances. Just drop your cartridge into the gauge and if it fits, it will chamber in your gun. Each gauge is clearly marked for caliber and is anodized in a bright orange color so they will be easy to spot on your reloading bench.

Specifications:

- Caliber: .243 Winchester
- Material: Aluminum

Out of Stock
$11.09
351137
Lyman - Ammo Checker Single 6.5 Grendel - Single Caliber Ammo Checker - 6.5mm Grendel

Lyman Ammo Checkers verify the quality and consistency of both reloaded and factory ammunition. They are machined from solid aluminum and cut with custom tooling to SAAMI minimum chamber tolerances. Just drop your cartridge into the gauge and if it fits, it will chamber in your gun. Each gauge is clearly marked for caliber and is anodized in a bright orange color so they will be easy to spot on your reloading bench.

Specifications:

- Caliber: 6.5mm Grendel
- Material: Aluminum

Out of Stock
$14.59
351138
Lyman - Ammo Checker Single 270 Win - Single Caliber Ammo Checker - .270 Winchester

Lyman Ammo Checkers verify the quality and consistency of both reloaded and factory ammunition. They are machined from solid aluminum and cut with custom tooling to SAAMI minimum chamber tolerances. Just drop your cartridge into the gauge and if it fits, it will chamber in your gun. Each gauge is clearly marked for caliber and is anodized in a bright orange color so they will be easy to spot on your reloading bench.

Specifications:

- Caliber: .270 Winchester
- Material: Aluminum

Out of Stock
$14.59
351139
Lyman - Ammo Checker Single 30-06 - Single Caliber Ammo Checker - .30-06 Springfield

Lyman Ammo Checkers verify the quality and consistency of both reloaded and factory ammunition. They are machined from solid aluminum and cut with custom tooling to SAAMI minimum chamber tolerances. Just drop your cartridge into the gauge and if it fits, it will chamber in your gun. Each gauge is clearly marked for caliber and is anodized in a bright orange color so they will be easy to spot on your reloading bench.

Specifications:

- Caliber: .30-06 Springfield
- Material: Aluminum

Out of Stock
$14.59
351140
Lyman - Ammo Checker Single 7.62x39 - Single Caliber Ammo Checker - 7.62x39mm

Lyman Ammo Checkers verify the quality and consistency of both reloaded and factory ammunition. They are machined from solid aluminum and cut with custom tooling to SAAMI minimum chamber tolerances. Just drop your cartridge into the gauge and if it fits, it will chamber in your gun. Each gauge is clearly marked for caliber and is anodized in a bright orange color so they will be easy to spot on your reloading bench.

Specifications:

- Caliber: 7.62x39mm
- Material: Aluminum

Out of Stock
$14.59
Hornady - Measuring Devices DIGITAL CALIPER - Caliper - 6
Hornady - Measuring Devices DIGITAL CALIPER - Caliper - 6" Digital, Stainless Steel

The Hornady Digital Caliper is perfect for a reloader looking for a tool to precisely measure case and bullet length, inside and outside diameters, primer pocket depth, overall cartridge length, and more. The calipers feature a large, easy to read LCD screen, and comes packaged in a protective plastic case.

Features:

- Automatic Shutoff

Accessories Includes:

Protective Hard Case
One 1.55 Volt Silver Oxide Battery

Specifications:

- Type: Digital Caliper
- Function: Measuring Length
- Accuracy: .001"
- Range: 0-6"

Notes:

Knob at bottom of face can be loosened to allow face to turn and thereby 'zero' the caliper
The screw should then be tightened to keep the setting
Knob at top of caliper can be tightened to lock down a measurement

Out of Stock
$22.17
Lyman - Stainless Caliper - Dial Caliper -
Lyman - Stainless Caliper - Dial Caliper -

This precision tool will deliver unfailing .001" accuracy long after the best reloading dies have worn out. Comes with storage case.

Specifications:

- Weight: 1 lb.

Out of Stock
$21.97
Frankford Arsenal - Economy Electronic Caliper - Electronic Caliper Stainless Steel -
Frankford Arsenal - Economy Electronic Caliper - Electronic Caliper Stainless Steel -

Reloading ammunition requires attention to many critical cartridge dimensions, including case length, neck and base diameters, overall length, primer pocket depth, etc. Verifiying these dimensions is quick and convenient with the Frankford Arsenal Calipers and Micrometers. Calipers are accurate to within .001" and Micrometers are accurate to within .0001". The calipers allow you to measure inside and outside diameters, plus depths. They also include a data output socket for interface with your computer or printer. You will find them useful for many measuring tasks on and off the reloading bench. Packaged in a convenient, protective case. (Stainless Steel)

Out of Stock
$17.23
Frankford Arsenal - Stainless Steel Dial Caliper - Stainless Steel Dial Caliper -
Frankford Arsenal - Stainless Steel Dial Caliper - Stainless Steel Dial Caliper -

Reloading ammunition requires attention to many critical cartridge dimensions, including case length, neck and base diameters, overall length, primer pocket depth, etc. Verifying these dimensions is quick and convenient with the Frankford Arsenal Calipers and Micrometers. The calipers are accurate to within .001" and the Micrometers are accurate to within .0001". The calipers allow you to measure inside and outside diameters, plus depths. You will find them useful for many measuring tasks on and off the reloading bench.

Packaged in a convenient, protective case.

$20.99
Gunmaster - GunMaster 33pc Professional Driver Set - 33 Piece Professional Driver Set - (761903382999)

produced to be a great way to cut costs by reloading your used or spent bullet cartridge casings with your very own mixture the dac technologies pro 33 piece driver set is fun and easy to use. this gunsmithing equipment from dac technologies is made using unbelievably durable supplies that are sure to offer you a tough and reliable selection for every one of your bullet case reloading needs. for many years dac technologies has elevated the reloading world and the is the direct consequence of their driven endeavors to bring you the greatest reloading gear for the value.

double molded custom handle driver with magnetic tip to keeps the bits in place. features a selected combination of the most popular bit sizes to work on firearms. unique flip open design doubles as a bit holder hanger as well as driver holder.

set includes:

- bits: t5 t9 t10 t15 t20 t25 t27 t30 t40
- square: s1 s2 s3
- phillips: 0 1 2 3
- slotted: 3.5 4.5 5.5 6 7
- hex: 5/64 3/32 1/8 5/32 3/16 1/4 5/16 9/32
- pozi: pz0 pz1 pz2 pz3


  • 33 piece professional driver set

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$5.14
Lyman - MSR Ammo Checker Block - MSR Ammo Checker Block - (011516730039)

Lymans Ammo Checkers check the quality and consistency of both reloaded rounds and purchased ammo. A must for any auto shooter for easy and consistent feed. You cant afford misfeeds so get the easiest no-go gauge available today!

These Ammo Checkers are gauges that allow a reloader to quickly confirm that their ammunition will fit in their chamber. Machined from solid blocks of 6061 T6 aircraft grade aluminum and cut with custom tooling to SAAMI minimum chamber dimensions. One gauge will work with a variety of calibers. Just drop your loaded rounds into the ammo checker and if the round fits into the gauge it will fit in the guns chamber. Each caliber is clearly engraved on the gauge.

Specifications:

Caliber:

- 223 Remington
- 300 AAC Blackout 7.62x35mm
- 450 Bushmaster
- 458 Socom
- 50 Beowulf
- 6.5 Grendel
- 6.8mm Remington SPC
- 7.62x39mm
- Material: Alminum


  • MSR Ammo Checker Block
  • Brand: Lyman


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$27.50
Per Page      1 - 44 of 44
  • 1