Presses

Sort By:  
Lee Precision - Classic 4 Hole - Turret Press Deluxe Kit (734307903046)

The Lee 4 Hole Classic Turret Press features a proven design which utilizes turrets that lock into a solid steel ring allowing the reloader to quickly and effortlessly change calibers. Simply lift out the entire turret and replace with an extra turret sold separately set up in a different caliber. The powerful linkage allows even the largest magnum cases to be sized with minimal effort. Boasting generous hand clearance and a comfortable wood grip the Lee turret press will offer years of service to the even the most seasoned reloaders.

Deluxe Kit Includes:

- Turret Press with Auto Index
- Auto Drum Powder Measure
- Large and Small Safety Prime System
- Safety Powder Scale
- Case Conditioning Kit Including: Case Trimmer Cutter and Lock Stud Chamfer Tool Large and Small Primer Pocket Cleaner Lee Case Sizing Lube
Modern Reloading 2nd Edition Revised Reloading Manual

Specifications:

- Press Type: Turret Press
- Frame Material: Steel and Cast Iron
- Frame Design: Not Available
- Frame Offset: Not Available
- Frame Opening Size: Not Available
- Handle Location: Bottom Right or Left
- Die Size Accepted: 7/8-14 Threaded Dies
- Turrets Accepted: Yes
- Turrets Used: Lee 4-Hole Turrets
- Spent Primer Collection System: Built-in
- Ram Stroke: 3-1/2
- Ram Diameter: Not Available
- Priming Feature: Lever Prime System with large and small primer cups included
- Number of Mounting Holes: 3
- Mounting Hardware Included: No


  • Classic 4 Hole
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$253.04
Lee Precision - Pro 1000 Progressive Press Kit Pro Auto Disk - .40 Smith & Wesson (734307906825)

The Lee Pro 1000 Progressive Press is a great press for beginning reloaders or seasoned veterans. Just add a bullet and load a cartridge with each pull of the lever - all other operations are automatic. For added safety primers and powder are fed only if a case is present. For fine adjustments or for experimenting an alternate loading sequence allows for loading only one case at a time. Makes learning easy for the first time user. Turrets sold separately.

Warning: Lee recommends to only use CCI or Remington primers. Other primers will not safely work in this priming system.

Features:

- Comes with the roller handle upgrade
- Easily Changed over to other calibers
- There are numerous upgrades available for this kit to increase productivity
- For reloaders looking to reload more than one caliber this press is easily changed over. All that is needed is an extra turret and the appropriate shell plate carrier sold separately some cartridges might require the Lee Auto-Disk Powder Measure Double Disk Kit Item# 870920

Includes:

- Caliber specific die set: Carbide 3-Die sets
- Pro Auto-Disk Powder Measure with 4 disks
- Pro 1000 Primer attachment
- Case Feeder attachment with tubes
- Appropriate Shell plate

Specifications:

- Cartridge: 40 S&W
- Frame Material: Steel and Cast Aluminum
- Press Type: Progressive Press
- Priming Feature: Yes
- Handle Location: Ambidextrous
- Number of Mounting Holes: 3
- Die Size Accepted: Standard 7/8-14 Threaded Dies
- Die Bushing Accepted: No
- Mounting Hardware Included: No
- Ram Stroke: 3.5


  • Pro 1000 Progressive Press Kit Pro Auto Disk
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$290.00
Lee Precision - Pro 1000 Progressive Press Shellplate - #19 (9mm Luger, 40 S&W, 41 Action Express) (734307906832)

To change calibers the entire Shellplate Carrier may be replaced. Please see the Technical Specifications below for specific caliber information.

Specifications:

- Fits: 9mm Luger
40 S&W
38 Super
38 ACP
41 Action Express
- Extended: No
- Press Fit: Lee Pro 1000
- Function: Shellplate Carrier Lee Pro 1000 Progressive Press
- Material: Aluminum Steel and Polymer


  • Pro 1000 Progressive Press Shellplate
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$45.70
Lee Precision - Single Stage Press - Classic Cast .50 BMG Kit (734307908591)

This single stage press has a rigid cast iron O frame with a large opening and 4 ram stroke. The powerful compound linkage has a travel stop to prevent cam-over. Adjustable for right or left hand use. Also features an automatic primer arm with bottom of stroke priming and a large 1-1/8 diameter ram. Small and Large primer cups are included. Accepts both standard 7/8-14 threaded dies and the larger 1-1/4-12 threaded dies.

Kit Includes:

- The Classic Cast Press
- 50 BMG Die Set
- Shell Holder
- Ram Prime and Case Lube
- Large and Small Primer Arms as well as a Die Bushing for Reloading with Standard 7/8 x 14 Thread Die

Specifications:

- Press Type: Single Stage
- Frame Material: Cast Iron
- Frame Design: O-Frame
- Frame Offset: 30 Degrees
- Frame Opening Size: Not Available
- Handle Location: Bottom Right or Left
- Die Size Accepted: 1-1/4-12 Threaded Dies or 7/8-14 Threaded dies with bushings
- Die Bushing Accepted: Yes
- Die Bushing Brand Used: Lee
- Spent Primer Collection System:
- Ram Stroke: Not Available
- Ram Diameter: 1-1/8
- Priming Feature: Not Available
- Number of Mounting Holes: 3
- Mounting Hardware Included: No


  • Single Stage Press
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$302.02
Lee Precision - Pro 1000, Load-Master Progressive Press Bullet Feeder Kit - .30 to .32 Caliber Upto .60" Long (734307908928)

Automatically feeds bullets into the mouth of the seating die. Aligns bullets more accurately than possible by hand. Increases the cyclic rate by 50 to 100%. Designed to fit the Pro 1000 and Load-Master Presses only.

Kit is complete for one bullet diameter and range of length. Converting to a different caliber and length will require different feed die and fingers. New seater die shorter required to seat bullets not included. Pre-1992 presses require a new shellplate carrier Available only from Lee Precision

Kit Includes:

- Feeder tube
- Stand
- Hardware
- Feed die and fingers

Specifications:

- Caliber: 30 to 32 cal bullets
- Size: Up to .60 long


  • Pro 1000 Load-Master Progressive Press Bullet Feeder Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$39.18
Lee Precision - Pro 1000, Load-Master Progressive Press Bullet Feeder Kit - .355 to .365 Diameter Upto .46" Long (734307908935)

Automatically feeds bullets into the mouth of the seating die. Aligns bullets more accurately than possible by hand. Increases the cyclic rate by 50 to 100%. Designed to fit the Pro 1000 and Load-Master Presses only.

Kit is complete for one bullet diameter and range of length. Converting to a different caliber and length will require different feed die and fingers. New seater die shorter required to seat bullets not included. Pre-1992 presses require a new shellplate carrier Available only from Lee Precision

Kit Includes:

- Feeder tube
- Stand
- Hardware
- Feed die and fingers

Specifications:

- Caliber: 9mm - .365 Dia
- Size: Up to .46 long
- Material: Plastic/Steel


  • Pro 1000 Load-Master Progressive Press Bullet Feeder Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$39.18
Lee Precision - Pro 1000, Load-Master Progressive Press Bullet Feeder Kit - .355 to .365 Diameter .46" Upto .60" Long (734307908942)

Automatically feeds bullets into the mouth of the seating die. Aligns bullets more accurately than possible by hand. Increases the cyclic rate by 50 to 100%. Designed to fit the Pro 1000 and Load-Master Presses only.

Kit is complete for one bullet diameter and range of length. Converting to a different caliber and length will require different feed die and fingers. New seater die shorter required to seat bullets not included. Pre-1992 presses require a new shellplate carrier Available only from Lee Precision

Kit Includes:

- Feeder tube
- Stand
- Hardware
- Feed die and fingers

Specifications:

- Caliber: 9mm - .365 Dia
- Size: .46-.60 long
- Material: Plastic/Steel


  • Pro 1000 Load-Master Progressive Press Bullet Feeder Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$39.18
Lee Precision - Pro 1000, Load-Master Progressive Press Bullet Feeder Kit - .40 to .44 Caliber Upto .65" Long (734307908966)

Automatically feeds bullets into the mouth of the seating die. Aligns bullets more accurately than possible by hand. Increases the cyclic rate by 50 to 100%. Designed to fit the Pro 1000 and Load-Master Presses only.

Kit is complete for one bullet diameter and range of length. Converting to a different caliber and length will require different feed die and fingers. New seater die shorter required to seat bullets not included. Pre-1992 presses require a new shellplate carrier Available only from Lee Precision

Kit Includes:

- Feeder tube
- Stand
- Hardware
- Feed die and fingers

Specifications:

- Caliber: 40 Cal - .44 Cal
- Size: Up to .65 Long
- Material: Plastic/Steel


  • Pro 1000 Load-Master Progressive Press Bullet Feeder Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$39.18
Lee Precision - Pro 1000, Load-Master Progressive Press Bullet Feeder Kit - .40 to .44 Caliber From .65" To .80" Long (734307908973)

Automatically feeds bullets into the mouth of the seating die. Aligns bullets more accurately than possible by hand. Increases the cyclic rate by 50 to 100%. Designed to fit the Pro 1000 and Load-Master Presses only.

Kit is complete for one bullet diameter and range of length. Converting to a different caliber and length will require different feed die and fingers. New seater die shorter required to seat bullets not included. Pre-1992 presses require a new shellplate carrier Available only from Lee Precision

Kit Includes:

- Feeder tube
- Stand
- Hardware
- Feed die and fingers

Specifications:

- Caliber: 40 Cal - .44 Cal
- Size: .65 - .80 Long
- Material: Plastic/Steel


  • Pro 1000 Load-Master Progressive Press Bullet Feeder Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$39.18
Lee Precision - Pro 1000, Load-Master Progressive Press Bullet Feeder Kit - .45 Caliber Upto .67" Long (734307908980)

Automatically feeds bullets into the mouth of the seating die. Aligns bullets more accurately than possible by hand. Increases the cyclic rate by 50 to 100%. Designed to fit the Pro 1000 and Load-Master Presses only.

Kit is complete for one bullet diameter and range of length. Converting to a different caliber and length will require different feed die and fingers. New seater die shorter required to seat bullets not included. Pre-1992 presses require a new shellplate carrier Available only from Lee Precision

Kit Includes:

- Feeder tube
- Stand
- Hardware
- Feed die and fingers

Specifications:

- Caliber: 45 Cal
- Size: Up to .67 Long
- Material: Plastic/Steel


  • Pro 1000 Load-Master Progressive Press Bullet Feeder Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$39.18
Lee Precision - Load Master Progressive Press Kit - .223 Remington (734307909222)

The Lee Loadmaster Progressive Press reloads both rifle and handgun cartridges with ease and enough clearance for even the largest magnum rifle cases. It can be used as an automatic indexing progressive press or as a single stage press and its five stations accept most popular reloading dies. Dies are held by a detachable turret that allows them to be removed and reinserted without adjusting.

Includes:

- Lee Load Master Progressive Press
- Lee Pace-Setter 3-Die Set Full Length Sizing Die
- Bullet Seating Die Trim Die
- #4 Shellplate
- Auto-Drum Powder Measure
- Rifle Charging Die
- Double Disk Kit
- Rifle Case feeder
- Primer feeder

Specifications:

- Frame Material: Steel and Cast Aluminum
- Press Type: Progressive Press
- Priming Feature: Yes
- Handle Location: Bottom Right Hand
- Number of Mounting Holes: 3
- Spent Primer Collection System: Yes
- Die Size Accepted: Standard 7/8-14 Threaded Dies
- Die Bushing Accepted: No
- Mounting Hardware Included: No
- Ram Stroke: 3.75
- Frame Design: O-Frame
- Ram Diameter: 1.75


  • Load Master Progressive Press Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$319.98
Lee Precision - 4 Hole Turret Press - with Auto Index Value Kit (734307909284)

The Lee 4 Hole Turret Press features a proven design which utilizes turrets that lock into a solid steel ring allowing the reloader to quickly and effortlessly change calibers. Simply lift out the entire turret and replace with an extra turret sold separately set up in a different caliber. The powerful linkage allows even the largest magnum cases to be sized with minimal effort. Boasting generous hand clearance and a comfortable wood grip the Lee turret press will offer years of service to the even the most seasoned reloaders.

Note: The Turret press pictured is mounted on the Lee Bench Plate this is sold as an accessory as product # 113651.

Includes:

- Turret Press with Auto Index
- Auto Disk Powder Measure
- Safety Scale
- Primer Pocket Cleaner
- Cutter
- Lock Stud
- Chamfer Tool

Specifications:

- Frame Material: Steel and Cast Aluminum
- Press Type: Turret Press
- Priming Feature: Yes
- Handle Location: Ambidextrous
- Number of Mounting Holes: 3
- Spent Primer Collection System: Yes
- Die Size Accepted: Standard 7/8-14 Threaded Dies
- Die Bushing Accepted: No
- Ram Stroke: 3.5


  • 4 Hole Turret Press
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$162.45
Lee Precision - Load Master Progressive Press Kit - .32 Smith & Wesson and .32 H&R (734307909352)

The Lee Loadmaster Progressive Press reloads both rifle and handgun cartridges with ease and enough clearance for even the largest magnum rifle cases. It can be used as an automatic indexing progressive press or as a single stage press and its five stations accept most popular reloading dies. Dies are held by a detachable turret that allows them to be removed and reinserted without adjusting

Specifications:

- Caliber: .32 Smith & Wesson Long and .32 H&R Magnum
- Frame Material: Steel and Cast Aluminum
- Press Type: Progressive Press
- Priming Feature: Yes
- Handle Location: Bottom Right Hand
- Number of Mounting Holes: 3
- Spent Primer Collection System: Yes
- Die Size Accepted: Standard 7/8-14 Threaded Dies
- Die Bushing Accepted: No
- Mounting Hardware Included: No
- Ram Stroke: 3 3/4
- Frame Design: O-Frame
- Ram Diameter: 1 3/4


  • Load Master Progressive Press Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$392.00
Lee Precision - Load Master Progressive Press Kit - 9mm Luger (734307909369)

The Lee Loadmaster Progressive Press reloads both rifle and handgun cartridges with ease and enough clearance for even the largest magnum rifle cases. It can be used as an automatic indexing progressive press or as a single stage press and its five stations accept most popular reloading dies. Dies are held by a detachable turret that allows them to be removed and reinserted without adjusting

Specifications:

- Caliber: 9mm Luger
- Frame Material: Steel and Cast Aluminum
- Press Type: Progressive Press
- Priming Feature: Yes
- Handle Location: Bottom Right Hand
- Number of Mounting Holes: 3
- Spent Primer Collection System: Yes
- Die Size Accepted: Standard 7/8-14 Threaded Dies
- Die Bushing Accepted: No
- Mounting Hardware Included: No
- Ram Stroke: 3 3/4
- Frame Design: O-Frame
- Ram Diameter: 1 3/4


  • Load Master Progressive Press Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$319.98
Lee Precision - Load Master Progressive Press Kit - .380 Auto (734307909376)

The Lee Loadmaster Progressive Press reloads both rifle and handgun cartridges with ease and enough clearance for even the largest magnum rifle cases. It can be used as an automatic indexing progressive press or as a single stage press and its five stations accept most popular reloading dies. Dies are held by a detachable turret that allows them to be removed and reinserted without adjusting

Specifications:

- Caliber: .380 Auto
- Frame Material: Steel and Cast Aluminum
- Press Type: Progressive Press
- Priming Feature: Yes
- Handle Location: Bottom Right Hand
- Number of Mounting Holes: 3
- Spent Primer Collection System: Yes
- Die Size Accepted: Standard 7/8-14 Threaded Dies
- Die Bushing Accepted: No
- Mounting Hardware Included: No
- Ram Stroke: 3 3/4
- Frame Design: O-Frame
- Ram Diameter: 1 3/4


  • Load Master Progressive Press Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$319.98
Lee Precision - Load Master Progressive Press Kit - .38 Special and .357 Magnum (734307909383)

The Lee Loadmaster Progressive Press reloads both rifle and handgun cartridges with ease and enough clearance for even the largest magnum rifle cases. It can be used as an automatic indexing progressive press or as a single stage press and its five stations accept most popular reloading dies. Dies are held by a detachable turret that allows them to be removed and reinserted without adjusting

Specifications:

- Caliber: .38 Special and .357 Magnum
- Frame Material: Steel and Cast Aluminum
- Press Type: Progressive Press
- Priming Feature: Yes
- Handle Location: Bottom Right Hand
- Number of Mounting Holes: 3
- Spent Primer Collection System: Yes
- Die Size Accepted: Standard 7/8-14 Threaded Dies
- Die Bushing Accepted: No
- Mounting Hardware Included: No
- Ram Stroke: 3 3/4
- Frame Design: O-Frame
- Ram Diameter: 1 3/4


  • Load Master Progressive Press Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$392.00
Lee Precision - Load Master Progressive Press Kit - .44 Special and .44 Magnum (734307909437)

The Lee Loadmaster Progressive Press reloads both rifle and handgun cartridges with ease and enough clearance for even the largest magnum rifle cases. It can be used as an automatic indexing progressive press or as a single stage press and its five stations accept most popular reloading dies. Dies are held by a detachable turret that allows them to be removed and reinserted without adjusting

Specifications:

- Caliber: .44 Special and .44 Magnum
- Frame Material: Steel and Cast Aluminum
- Press Type: Progressive Press
- Priming Feature: Yes
- Handle Location: Bottom Right Hand
- Number of Mounting Holes: 3
- Spent Primer Collection System: Yes
- Die Size Accepted: Standard 7/8-14 Threaded Dies
- Die Bushing Accepted: No
- Mounting Hardware Included: No
- Ram Stroke: 3 3/4
- Frame Design: O-Frame
- Ram Diameter: 1 3/4


  • Load Master Progressive Press Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$319.98
Lee Precision - Load Master Progressive Press Kit - .45 ACP (734307909451)

The Lee Loadmaster Progressive Press reloads both rifle and handgun cartridges with ease and enough clearance for even the largest magnum rifle cases. It can be used as an automatic indexing progressive press or as a single stage press and its five stations accept most popular reloading dies. Dies are held by a detachable turret that allows them to be removed and reinserted without adjusting

Specifications:

- Caliber: .45 ACP
- Frame Material: Steel and Cast Aluminum
- Press Type: Progressive Press
- Priming Feature: Yes
- Handle Location: Bottom Right Hand
- Number of Mounting Holes: 3
- Spent Primer Collection System: Yes
- Die Size Accepted: Standard 7/8-14 Threaded Dies
- Die Bushing Accepted: No
- Mounting Hardware Included: No
- Ram Stroke: 3 3/4
- Frame Design: O-Frame
- Ram Diameter: 1 3/4


  • Load Master Progressive Press Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$319.98
Lee Precision - Load Master Progressive Press Kit - .45 Colt (734307909468)

The Lee Loadmaster Progressive Press reloads both rifle and handgun cartridges with ease and enough clearance for even the largest magnum rifle cases. It can be used as an automatic indexing progressive press or as a single stage press and its five stations accept most popular reloading dies. Dies are held by a detachable turret that allows them to be removed and reinserted without adjusting

Specifications:

- Caliber: .45 Colt
- Frame Material: Steel and Cast Aluminum
- Press Type: Progressive Press
- Priming Feature: Yes
- Handle Location: Bottom Right Hand
- Number of Mounting Holes: 3
- Spent Primer Collection System: Yes
- Die Size Accepted: Standard 7/8-14 Threaded Dies
- Die Bushing Accepted: No
- Mounting Hardware Included: No
- Ram Stroke: 3 3/4
- Frame Design: O-Frame
- Ram Diameter: 1 3/4


  • Load Master Progressive Press Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$319.98
Hornady - Quick Detach Universal Mounting Plate - Red (090255996982)

The Hornady Quick Detach Universal Mounting Plate adds additional versatility to Universal Mounting Plate Assembly. By purchasing an additional plate the user can have multiple tools set up and ready to use within minutes. Simply bolt a reloading press case trimmer or any number of bench mounted reloading tools to the Quick Detach Plate. Then switch gears with ease by simply removing the tool currently in use and clamping the new plate with another tool in place.


  • Quick Detach Universal Mounting Plate Red
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$16.48
Hornady - Quick Detach Universal Mounting Plate - Assembly (090255996975)

The Hornady Quick Detach Universal Mounting Plate Assembly allows the user to easily attach and detach Hornady reloading tools and accessories. Great for a limited workspace the Quick Detach system features aluminum mounting blocks for a strong clamp and extreme stability. Cam lock clamps secure the plate with reloading equipment attached to the base. Additional plates are sold separately MidwayUSA # 909-787. Simply bolt a reloading press case trimmer or any number of bench mounted reloading tools to the Quick Detach Plate. Then switch gears with ease by simply removing the tool currently in use and clamping the new plate with another tool in place.


  • Quick Detach Universal Mounting Plate Assembly
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$54.54
RCBS - Pro Chucker Progressive Press Powder Die - (604544626254)

The Powder Die allows the Case Activated Powder Measure CAPM to be quickly moved from one Die Plate to another.

Specifications:

- Quantity: 1


  • Pro Chucker Progressive Press Powder Die
  • Brand: RCBS


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$44.81
RCBS - Powder Die-Funnel Adapter - (604544631616)

RCBS Funnel adapter takes the place of the Case Activated PM. This allows placement of a funnel onto the Powder Die to pour measured charges into the case for greater accuracy.

Specifications:

- Quantity: 1


  • Powder Die-Funnel Adapter
  • Brand: RCBS


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$9.95
Lee Precision - Quick Trim Die - 20 Gauge, 2 3/4" and 3" - Shell Length (734307900120)

The Lee Load-All 2 offers the reloader a an inexpensive option when it comes to making cost effective shotgun shells. This press includes eight shot bushings that measure 7/8 1 1-1/8 1-1/4 1-1/2 1-3/4 and 1-7/8 ounces. The 1-7/8 ounce bushing is a small tab that fits inside the charge bar. Also included with this press are sixteen powder bushings that measure: 095 100 105 110 116 122 128 134 141 148 155 163 171 180 189 and 198 cubic centimeters. Unlike other more expensive presses the Lee Load-All 2 also comes with 6 and 8 point crimp starters safety charge bar steel sizing ring aluminum plate for primer catcher spare wad guide primer guide spring and pin one screw and two bolts with locking nuts. Additionally the 12 and 20 gauge models can load 3 shells without needing an expensive conversion kit.

Includes:

- Comes with 6 and 8 point crimp starters
- Safety charge bar
- Steel sizing ring
- Aluminum plate for primer catcher
- Spare wad guide
- Primer guide
- Spring and pin
- One screw and two bolts with locking nuts

Specifications:

- Gauge: 20
- Shell Length: 2-3/4 and 3
- Frame Material: Steel and Plastic
- Press Type: Single Stage
- Priming Feature: Single Feed
- Handle Location: Top Center
- Spent Primer Collection System: Yes
- Mounting Hardware Included: Yes
- Gauge Conversions Available: Yes
- Powder Bushings Included: 16 Powder Bushings
- Charge Bar Shot Weight: 8 Shot bushings


  • Quick Trim Die
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$62.84
Lee Precision - Load-All 2 Shotshell Press - 12 Gauge, Nobel 2 3/4" and 3" Shell Length (734307900137)

Lee complete reloading tool for 12 gauge with 24 shot and powder bushings. Loads 2 3/4 and 3 inch shells. Nothing else required. Includes an extra white bushing in .224 for Nobel powders along with Special Notes and Charge Table regarding the extra Bushing.

Note: this press cannot load 2 1/2 or 3 1/2 shot shells


  • Load-All 2 Shotshell Press
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$66.12
Lee Precision - Load-All 2 Shotshell Press - 12 Gauge, 67.5, 2-3/4" and 3" Shell Length (734307900144)

Lee complete reloading tool for 12 gauge with 24 shot and powder bushings. Loads 2 3/4 and 3 inch shells. Nothing else required. Press has been modified in last station to accommodate 67.5mm shells. Includes an extra white bushing in .224 for Nobel powders along with Special Notes and Charge Table regarding the extra Bushing.

Notes:

- Warning: If press is converted over to 16 or 20 gauge it will no longer be compatible with 67.5mm shells
- This press cannot load 2 1/2 or 3 1/2 shot shells


  • Load-All 2 Shotshell Press
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$66.12
Lee Precision - Load-All 2 Shotshell Press - 16 Gauge, 2 3/4" Shell Length (734307900151)

The Lee Load-All 2 offers the reloader a an inexpensive option when it comes to making cost effective shotgun shells. This press includes eight shot bushings that measure 7/8 1 1-1/8 1-1/4 1-1/2 1-3/4 and 1-7/8 ounces. The 1-7/8 ounce bushing is a small tab that fits inside the charge bar. Also included with this press are sixteen powder bushings that measure: 095 100 105 110 116 122 128 134 141 148 155 163 171 180 189 and 198 cubic centimeters. Unlike other more expensive presses the Lee Load-All 2 also comes with 6 and 8 point crimp starters safety charge bar steel sizing ring aluminum plate for primer catcher spare wad guide primer guide spring and pin one screw and two bolts with locking nuts. Additionally the 12 and 20 gauge models can load 3 shells without needing an expensive conversion kit.

Includes:

- Comes with 6 and 8 point crimp starters
- Safety charge bar
- Steel sizing ring
- Aluminum plate for primer catcher
- Spare wad guide
- Primer guide
- Spring and pin
- One screw and two bolts with locking nuts

Specifications:

- Gauge: 16
- Shell Length: 2-3/4
- Frame Material: Steel and Plastic
- Press Type: Single Stage
- Priming Feature: Single Feed
- Handle Location: Top Center
- Spent Primer Collection System: Yes
- Mounting Hardware Included: Yes
- Gauge Conversions Available: Yes
- Powder Bushings Included: 16 Powder Bushings
- Charge Bar Shot Weight: 8 Shot Bushings


  • Load-All 2 Shotshell Press
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$62.84
Lee Precision - Pro 1000 Progressive Press Kit Pro Auto Disk - .38 Super (734307900359)

The Lee Pro 1000 Progressive Press is a great press for beginning reloaders or seasoned veterans. Just add a bullet and load a cartridge with each pull of the lever - all other operations are automatic. For added safety primers and powder are fed only if a case is present. For fine adjustments or for experimenting an alternate loading sequence allows for loading only one case at a time. Makes learning easy for the first time user. Turrets sold separately.

Package Includes:

- Caliber specific die set: Carbide 3-Die sets
- Pro Auto-Disk Powder Measure with 4 disks
- Pro 1000 Primer attachment
- Case Feeder attachment with tubes
- Appropriate Shell plate

Specifications:

- Press Type: Progressive Press
- Cartridge: .38 Super
- Frame Material: Steel and Cast Aluminum
- Priming Feature: Yes
- Handle Location: Ambidextrous
- Number of Mounting Holes: 3
- Die Size Accepted: Standard 7/8-14 Threaded Dies
- Die Bushing Accepted: No
- Mounting Hardware Included: No
- Ram Stroke: 3 1/2


  • Pro 1000 Progressive Press Kit Pro Auto Disk
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$290.00
Lee Precision - Classic 4 Hole - Turret Press (734307900649)

Considered one of the most convenient presses to own the Classic Turret Press features solid cast iron construction the same steel linkage of the Classic Cast Press. Made from steel and cast iron the Classic Turret works with small and large primers on the lever prime system. The Auto-Indexing feature can easily be deactivated leaving the ram with 3-9 of stroke length.

Specifications:

- Press Type: Turret Press
- Frame Material: Steel and Cast Iron
- Frame Design: Not Available
- Frame Offset: Not Available
- Frame Opening Size: 4-1/2
- Handle Location: Bottom Right or Left
- Die Size Accepted: 7/8-14 Threaded Dies
- Die Bushing Accepted: No
- Die Bushing Brand Used: Not Available
- Spent Primer Collection System: Not Available
- Ram Stroke: 3-1/2
- Ram Diameter: 1-1/8
- Priming Feature: Lever Prime
- Number of Mounting Holes: 3
- Mounting Hardware Included: No


  • Classic 4 Hole
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$133.06
Lee Precision - Load All 2 Shotshell Press Conversion Kit - 12 Gauge (734307900700)

The Lee Load-All 2 is a very economical shotshell reloading press for anyone looking to make their own shotshells. One of the features that makes this press unique is how easily and economically the press can be converted to another gauge. This conversion kits contains everything to replace the entire die carrier so no adjustments are needed. The conversion kit includes the die carrier steel sizer wad guide shellholder load data and instructions.

Package Includes:

- Die and carrier assembly
- Steel sizing ring
- Wad guide
- Shellholder

Specifications:

- Fits: Lee Load-All 2
- Use: 12 Gauge Conversion Kit
- Material: Plastic and Steel


  • Load All 2 Shotshell Press Conversion Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$21.21
Lee Precision - Load All 2 Shotshell Press Conversion Kit - 16 Gauge (734307900717)

The Lee Load-All 2 is a very economical shotshell reloading press for anyone looking to make their own shotshells. One of the features that makes this press unique is how easily and economically the press can be converted to another gauge. This conversion kits contains everything to replace the entire die carrier so no adjustments are needed. The conversion kit includes the die carrier steel sizer wad guide shellholder load data and instructions.

Package Includes:

- Die and carrier assembly
- Steel sizing ring
- Wad guide
- Shellholder

Specifications:

- Fits: Lee Load-All 2
- Use: 16 Gauge Conversion Kit
- Material: Plastic and Steel


  • Load All 2 Shotshell Press Conversion Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$21.21
Lee Precision - Pro 1000 and Turret Press Roller Handle Update Kit - (734307900748)

The Lee Pro 1000 Progressive Press and Lee Turret presses are great presses for beginning reloaders or seasoned veterans. The Roller Handle Update Kit helps to make the reloading sequence more enjoyable on either of these presses by increasing the ergonomics. The handle is made of wood for durability and the kit includes everything needed to upgrade the ball grip. When the roller handle is pulled down the wooden grip will rotate on the assembly making the reloading sequence much more enjoyable.

Includes: All the necessary parts to upgrade to the roller handle assembly with complete installation instructions.

Specifications:

Fits the Following Lee Items:

- Lee Pro 1000 Progressive Press
- Lee 3 Hole Turret Press
- Lee 4 Hole Turret Press with Auto Index

- Function: Upgrade press from Ball Handle to Roller Handle
- Material: Steel Linkage Steel Arm wood Grip

Notes: Will not fit the Classic Cast Single Stage Press and Lee Classic 4 Hole Turret Press


  • Pro 1000 and Turret Press Roller Handle Update Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$26.12
Lee Precision - Challenger Breech Lock Single Stage Press - 60th Anniversary Kit (734307900809)

The Lee Precision Challenger Breech Lock Single Stage Press Kit is a great kit for the beginning reloader who wants a little more than just the basics. This kit contains the popular Challenger Breech Lock Single Stage Press which features an O frame design and solid construction making this press a great addition to any reloading room. One of the great features of the Challenger Breech Lock Press is the Breech Lock quick change die system that holds dies in inserts that can be quickly removed from the press. Includes one quick change insert. Popular O frame design with a 4-1/4 opening that is angled at 30 degrees for maximum hand clearance. The spent primer catcher is effective and easy to empty. Press is made with an ASTM 380 aluminum frame steel ram and operating linkage.

Other highlights are the Deluxe Perfect Powder Measure Auto Bench Prime with priming tool shell holder set Deluxe Quick Trim and a copy of the latest version of Modern Reloading featuring over 36000 loads for over 170 cartridges. Plus it includes the case prep tools found in other Lee kits. This kit comes with everything to start loading ammunition except for reloading dies and reloading components. Plus it is all the best products so youll never outgrow the kit!

Specifications:

- Frame Material: Aluminum
- Press Type: Single Stage
- Priming Feature: Yes
- Handle Location: Ambidextrous
- Number of Mounting Holes: 3
- Spent Primer Collection System: Yes
- Die Size Accepted: Standard 7/8-14 Threaded Dies
- Die Bushing Accepted: Yes
- Mounting Hardware Included: No
- Ram Stroke: 3 1/2
- Frame Design: O-Frame
- Ram Diameter: 0.815
- Frame Offset: 30
- Frame Opening Size: 4 1/4
- Die Bushing Brand Used: Lee Breech Lock Quick Change Bushings


  • Challenger Breech Lock Single Stage Press
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$244.07
Lee Precision - Breech Lock - Hand Press Kit (734307901806)

The Lee Breech Lock Hand Press takes all of the great features of the Lee Hand Held Press and adds Lees convenient Breech Lock System that allows reloaders to quickly change dies without having to readjust dies. A full size hand held reloading press yet the tool weighs only 1-1/2 lbs and costs so little; reloaders will want more than one. No matter how much reloading equipment a reloader has it is a really great idea to have a portable hand press. No time is wasted mounting a tool to a work bench. When finished reloading just pack it all away.

Kit Includes:

- Hand Press
- Ram Prime Unit
- Powder Funnel
- Resizing Lube

Specifications:

- Press Type: Single Stage Hand Held
- Frame Material: Aluminum
- Frame Design: C-Frame
- Frame Offset: None
- Frame Opening Size: 3-1/2
- Handle Location: Bottom Center
- Die Size Accepted: 7/8-14 Threaded Die
- Die Bushing Accepted: Yes
- Die Bushing Brand Used: Lee Breech Lock
- Spent Primer Collection System: None
- Ram Stroke: Not Available
- Ram Diameter: Not Available
- Priming Feature: Ram Priming Unit
- Number of Mounting Holes: Not Available
- Mounting Hardware Included: Not Available]


  • Breech Lock
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$63.67
Lee Precision - Load Master Progressive Press Kit - Press Only (734307901837)

The Lee Loadmaster Progressive Press reloads both rifle and handgun cartridges with ease and has enough clearance for even the largest magnum rifle cases. It can be used as an automatic indexing progressive press or as a single stage press and the five stations accept most popular reloading dies. Dies are held by a detachable turret that allows them to be removed and reinserted without adjusting. Dies and shellplates sold separately. This press comes with the press carrier and five-hole turret only.

Specifications:

- Press Type: Progressive Press
- Auto Index: Yes
- Number of Stations: 5
- Frame Material: Steel Cast Aluminum Polymer
- Frame Design: O-Frame
- Frame Offset: Not Available
- Frame Opening Size: Not Available
- Handle Location: Bottom Right
- Die Size Accepted: 7/8-14 Threaded Dies
- Die Bushing Accepted: No Replaceable Turrets
- Die Bushing Brand Used: Not Available
- Spent Primer Collection System: Built In
- Ram Stroke: 3-3/4
- Ram Diameter: 1-3/4
- Priming Feature: Automatic Sold Separately
- Number of Mounting Holes: 3


  • Load Master Progressive Press Kit
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$213.87
Lee Precision - Classic Loader - .223 Remington (734307902322)

The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading except a hammer. Kit includes Sizing Die Decapping Chamber Bullet Seater and Priming Chamber Priming Rod Powder Measure load data plastic case and complete instructions.

Package Includes:

- Bullet Seater and Priming Chamber
- Decapping Chamber
- Sizing Die
- Decapper
- Priming Rod
- Powder Measure
- Load Data
- Complete Instructions

Specifications:

- Cartridge: .223 Remington
- Material: Steel Loader Parts and Plastic Powder Dipper


  • Classic Loader
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$33.45
Lee Precision - Classic Loader - .243 Winchester (734307902353)

The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading except a hammer. Kit includes Sizing Die Decapping Chamber Bullet Seater and Priming Chamber Priming Rod Powder Measure load data plastic case and complete instructions.

Package Includes:

- Bullet Seater and Priming Chamber
- Decapping Chamber
- Sizing Die
- Decapper
- Priming Rod
- Powder Measure
- Load Data
- Complete Instructions

Specifications:

- Cartridge: .243 Winchester
- Material: Steel Loader Parts and Plastic Powder Dipper


  • Classic Loader
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$33.45
Lee Precision - Classic Loader - .270 Winchester (734307902407)

The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading except a hammer. Kit includes Sizing Die Decapping Chamber Bullet Seater and Priming Chamber Priming Rod Powder Measure load data plastic case and complete instructions.

Package Includes:

- Bullet Seater and Priming Chamber
- Decapping Chamber
- Sizing Die
- Decapper
- Priming Rod
- Powder Measure
- Load Data
- Complete Instructions

Specifications:

- Cartridge: .270 Winchester
- Material: Steel Loader Parts and Plastic Powder Dipper


  • Classic Loader
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$40.98
Lee Precision - Classic Loader - .7.62x54R (734307902438)

The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading except a hammer. Kit includes Sizing Die Decapping Chamber Bullet Seater and Priming Chamber Priming Rod Powder Measure load data plastic case and complete instructions.

Package Includes:

- Bullet Seater and Priming Chamber
- Decapping Chamber
- Sizing Die
- Decapper
- Priming Rod
- Powder Measure
- Load Data
- Complete Instructions

Specifications:

- Cartridge: .7.62x54R
- Material: Steel Loader Parts and Plastic Powder Dipper


  • Classic Loader
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$33.45
Lee Precision - Classic Loader - .30-30 Winchester (734307902445)

The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading except a hammer. Kit includes Sizing Die Decapping Chamber Bullet Seater and Priming Chamber Priming Rod Powder Measure load data plastic case and complete instructions.

Package Includes:

- Bullet Seater and Priming Chamber
- Decapping Chamber
- Sizing Die
- Decapper
- Priming Rod
- Powder Measure
- Load Data
- Complete Instructions

Specifications:

- Cartridge: .30-30 Winchester
- Material: Steel Loader Parts and Plastic Powder Dipper


  • Classic Loader
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$33.45
Lee Precision - Classic Loader - .308 Winchester (734307902452)

The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading except a hammer. Kit includes Sizing Die Decapping Chamber Bullet Seater and Priming Chamber Priming Rod Powder Measure load data plastic case and complete instructions.

Package Includes:

- Bullet Seater and Priming Chamber
- Decapping Chamber
- Sizing Die
- Decapper
- Priming Rod
- Powder Measure
- Load Data
- Complete Instructions

Specifications:

- Cartridge: .308 Winchester
- Material: Steel Loader Parts and Plastic Powder Dipper


  • Classic Loader
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$33.45
Lee Precision - Classic Loader - .303 British (734307902476)

The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading except a hammer. Kit includes Sizing Die Decapping Chamber Bullet Seater and Priming Chamber Priming Rod Powder Measure load data plastic case and complete instructions.

Package Includes:

- Bullet Seater and Priming Chamber
- Decapping Chamber
- Sizing Die
- Decapper
- Priming Rod
- Powder Measure
- Load Data
- Complete Instructions

Specifications:

- Cartridge: .303 British
- Material: Steel Loader Parts and Plastic Powder Dipper


  • Classic Loader
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$33.45
Lee Precision - Classic Loader - 9mm Luger (734307902544)

The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading except a hammer. Kit includes Sizing Die Decapping Chamber Bullet Seater and Priming Chamber Priming Rod Powder Measure load data plastic case and complete instructions.

Package Includes:

- Bullet Seater and Priming Chamber
- Decapping Chamber
- Sizing Die
- Decapper
- Priming Rod
- Powder Measure
- Load Data
- Complete Instructions

Specifications:

- Cartridge: 9mm Luger
- Material: Steel Loader Parts and Plastic Powder Dipper


  • Classic Loader
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$33.45
Lee Precision - Classic Loader - .38 Special (734307902575)

The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading except a hammer. Kit includes Sizing Die Decapping Chamber Bullet Seater and Priming Chamber Priming Rod Powder Measure load data plastic case and complete instructions.

Package Includes:

- Bullet Seater and Priming Chamber
- Decapping Chamber
- Sizing Die
- Decapper
- Priming Rod
- Powder Measure
- Load Data
- Complete Instructions

Specifications:

- Cartridge: .38 Special
- Material: Steel Loader Parts and Plastic Powder Dipper


  • Classic Loader
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$33.45
Lee Precision - Classic Loader - .357 Magnum (734307902582)

The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading except a hammer. Kit includes Sizing Die Decapping Chamber Bullet Seater and Priming Chamber Priming Rod Powder Measure load data plastic case and complete instructions.

Package Includes:

- Bullet Seater and Priming Chamber
- Decapping Chamber
- Sizing Die
- Decapper
- Priming Rod
- Powder Measure
- Load Data
- Complete Instructions

Specifications:

- Cartridge: .357 Magnum
- Material: Steel Loader Parts and Plastic Powder Dipper


  • Classic Loader
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$33.45
Lee Precision - Classic Loader - .44 Magnum (734307902605)

The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading except a hammer. Kit includes Sizing Die Decapping Chamber Bullet Seater and Priming Chamber Priming Rod Powder Measure load data plastic case and complete instructions.

Package Includes:

- Bullet Seater and Priming Chamber
- Decapping Chamber
- Sizing Die
- Decapper
- Priming Rod
- Powder Measure
- Load Data
- Complete Instructions

Specifications:

- Cartridge: .44 Magnum
- Material: Steel Loader Parts and Plastic Powder Dipper


  • Classic Loader
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$33.45
Lee Precision - Classic Loader - .45 Auto (734307902629)

The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading except a hammer. Kit includes Sizing Die Decapping Chamber Bullet Seater and Priming Chamber Priming Rod Powder Measure load data plastic case and complete instructions.

Package Includes:

- Bullet Seater and Priming Chamber
- Decapping Chamber
- Sizing Die
- Decapper
- Priming Rod
- Powder Measure
- Load Data
- Complete Instructions

Specifications:

- Cartridge: .45 Auto
- Material: Steel Loader Parts and Plastic Powder Dipper


  • Classic Loader
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$33.45
Lee Precision - Classic Loader - .45 Colt (734307902636)

The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading except a hammer. Kit includes Sizing Die Decapping Chamber Bullet Seater and Priming Chamber Priming Rod Powder Measure load data plastic case and complete instructions.

Package Includes:

- Bullet Seater and Priming Chamber
- Decapping Chamber
- Sizing Die
- Decapper
- Priming Rod
- Powder Measure
- Load Data
- Complete Instructions

Specifications:

- Cartridge: .45 Colt
- Material: Steel Loader Parts and Plastic Powder Dipper


  • Classic Loader
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$33.45
Lee Precision - Pro 1000 Progressive Press Kit Auto Drum - .223 Remington (734307906337)

The Lee Pro 1000 Progressive Press is a great press for beginning reloaders or seasoned veterans. Just add a bullet and load a cartridge with each pull of the lever - all other operations are automatic. For added safety primers and powder are fed only if a case is present. For fine adjustments or for experimenting an alternate loading sequence allows for loading only one case at a time. Makes learning easy for the first time user. Turrets sold separately.

Warning: Lee recommends to only use CCI or Remington primers. Other primers will not safely work in this priming system.

Features:

- Comes with the roller handle upgrade
- Easily Changed over to other calibers
- There are numerous upgrades available for this kit to increase productivity
- For reloaders looking to reload more than one caliber this press is easily changed over. All that is needed is an extra turret and the appropriate shell plate carrier sold separately

Includes:

- Caliber specific die set: Carbide 3-Die sets
- Auto-Drum Powder Measure
- Pro 1000 Primer attachment
- Case Feeder attachment with tubes
- Appropriate Shell plate

Specifications:

- Cartridge: 223 Remington
- Frame Material: Steel and Cast Aluminum
- Press Type: Progressive Press
- Priming Feature: Yes
- Handle Location: Ambidextrous
- Number of Mounting Holes: 3
- Die Size Accepted: Standard 7/8-14 Threaded Dies
- Die Bushing Accepted: No
- Mounting Hardware Included: No
- Ram Stroke: 3.5


  • Pro 1000 Progressive Press Kit Auto Drum
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$236.72
Lee Precision - Pro 1000 Progressive Press Kit Pro Auto Disk - .44 Special (734307906344)

The Lee Pro 1000 Progressive Press is a great press for beginning reloaders or seasoned veterans. Just add a bullet and load a cartridge with each pull of the lever - all other operations are automatic. For added safety primers and powder are fed only if a case is present. For fine adjustments or for experimenting an alternate loading sequence allows for loading only one case at a time. Makes learning easy for the first time user. Turrets sold separately.

Warning: Lee recommends to only use CCI or Remington primers. Other primers will not safely work in this priming system.

Features:

- Comes with the roller handle upgrade
- Easily Changed over to other calibers
- There are numerous upgrades available for this kit to increase productivity
- For reloaders looking to reload more than one caliber this press is easily changed over. All that is needed is an extra turret and the appropriate shell plate carrier sold separately

Includes:

- Caliber specific die set: Carbide 3-Die sets
- Auto-Drum Powder Measure
- Pro 1000 Primer attachment
- Case Feeder attachment with tubes
- Appropriate Shell plate

Specifications:

- Cartridge: 44 Special/44 Remington Magnum
- Frame Material: Steel and Cast Aluminum
- Press Type: Progressive Press
- Priming Feature: Yes
- Handle Location: Ambidextrous
- Number of Mounting Holes: 3
- Die Size Accepted: Standard 7/8-14 Threaded Dies
- Die Bushing Accepted: No
- Mounting Hardware Included: No
- Ram Stroke: 3.5


  • Pro 1000 Progressive Press Kit Pro Auto Disk
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$236.72
Per Page      1 - 50 of 113