Bullet Molds & Accessories

Sort By:  
Lee Precision - Mold Dc 429-200-Rf - 2 Cavity Bullet Mold - .44 Special, 44 Remington Magnum, 44-40 WCF (.429" Dia), 200 Grains, Flat Nose (734307902858)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.429
- Bullet Style: Flat Nose
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 200 Grains
- Mold Caliber: 44 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - Mold 6 Cav Tl452-230Tc - 6 Cavity Bullet Mold - 45 ACP, 45 Auto Rim, 45 Colt (LC) (.452" Dia), 230gr Tumble Lube Truncated Cone (734307902865)

Designed for volume production the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lees weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included #117-892.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Rust resistant aluminum blocks
- Lathe bored blocks with steel bushings and alignment pins
- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate

Specifications:

- Material: Aluminum
- Capacity: 6
- Diameter: 0.452
- Bullet Style: Truncated Cone
- Handle Included: No
- Gas Check: No
- Bullet Weight: 230 Grains
- Mold Caliber: 45 Caliber


  • 6 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$31.75
Lee Precision - Mold Dc Tl452-230Tc - 2 Cavity Bullet Mold - 45 ACP, 45 Auto Rim, 45 Colt (LC) (.452" Dia), 230gr, Tumble Lube Truncated Cone (734307902872)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.452
- Bullet Style: Truncated Cone
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 230 Grains
- Mold Caliber: 45 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$15.03
Lee Precision - Mold 6 Cav 452-230Tc - 6 Cavity Bullet Mold - 45 ACP, 45 Auto Rim, 45 Colt (Long Colt) (.452" Dia), 230 Grains, Truncated Cone (734307902896)

Designed for volume production the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lees weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included #117-892.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Rust resistant aluminum blocks
- Lathe bored blocks with steel bushings and alignment pins
- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate

Specifications:

- Material: Aluminum
- Capacity: 6
- Diameter: 0.452
- Bullet Style: Truncated Cone
- Handle Included: No
- Gas Check: No
- Bullet Weight: 230 Grains
- Mold Caliber: 45 Caliber


  • 6 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$40.54
Lee Precision - Mold Dc 452-230Tc - 2 Cavity Bullet Mold - 45 ACP, 45 Auto Rim, 45 Colt (Long Colt) (.452" Diameter), 230gr, Truncated Cone (734307902902)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.452
- Bullet Style: Truncated Cone
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 230 Grains
- Mold Caliber: 45 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$15.03
Lee Precision - 6 Cavity Tl358-148Wc - 6 Cavity Bullet Mold - 38 Spl, 357 Mag, 38 Colt New Police, 38 S&W (.358" Dia), 148gr, Tumble Lube WC (734307902940)

Designed for volume production the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lees weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included #117-892.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Rust resistant aluminum blocks
- Lathe bored blocks with steel bushings and alignment pins
- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate

Specifications:

- Material: Aluminum
- Capacity: 6
- Diameter: 0.358
- Bullet Style: Wadcutter
- Handle Included: No
- Gas Check: No
- Bullet Weight: 148 Grains
- Mold Caliber: 38 Special 357 Mag


  • 6 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$31.75
Lee Precision - 6 Cavity Tl358-158Swc - 6 Cavity Bullet Mold - 38 Spl, 357 Mag, 38 Colt New Police, 38 S&W (.358" Dia), 158gr, Tumble Lube SWC (734307902957)

Designed for volume production the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lees weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included #117-892.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Rust resistant aluminum blocks
- Lathe bored blocks with steel bushings and alignment pins
- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate

Specifications:

- Material: Aluminum
- Capacity: 6
- Diameter: 0.358
- Bullet Style: Semi-Wadcutter
- Handle Included: No
- Gas Check: No
- Bullet Weight: 158 Grains
- Mold Caliber: 38 Special 357 Mag


  • 6 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$31.75
Lee Precision - Mold Dc Tl430-240Swc - 2 Cavity Bullet Mold - 44 Spl, 44 Rem Mag, 44-40 WCF (.430" Dia), 240 Grains, Tumble Lube SWC (734307902995)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.43
- Bullet Style: Semi-Wadcutter
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 240 Grains
- Mold Caliber: 44 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - Mold Dc 311-100-2R - 2 Cavity Bullet Mold - .32 Caliber (.311" Diameter), 100 Grains, 2 Ogive Radius (734307903015)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.311
- Bullet Style: Round Nose 2 Ogive Radius
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 100 Grains
- Mold Caliber: 32 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$15.03
Lee Precision - Mold Dc 358-158-Rf - 2 Cavity Bullet Mold - 38 Spl, 357 Mag, 38 Colt New Police, 38 S&W (.358" Dia), 158gr, Flat Nose (734307903039)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.358
- Bullet Style: Flat Nose
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 158 Grains
- Mold Caliber: 38 Special 357 Mag


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$16.20
Lee Precision - 6 Cavity 358-125-Rf - 6 Cavity Bullet Mold - 38 Spl, 357 Mag, 38 Colt New Police, 38 S&W (.358" Dia), 125gr, Flat Nose (734307903060)

Designed for volume production the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lees weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included #117-892.

Features:

- Rust resistant aluminum blocks
- Lathe bored blocks with steel bushings and alignment pins

Specifications:

- Material: Aluminum
- Capacity: 6
- Diameter: 0.358
- Bullet Style: Flat Nose
- Handle Included: No
- Gas Check: No
- Bullet Weight: 125 Grains
- Mold Caliber: 38 Special 357 Mag


  • 6 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$31.75
Lee Precision - 6 Cavity 311-93-1R - 6 Cavity Bullet Mold - 32-20 WCF, 32 S&W Long, 32 Colt (.311" Diameter), 93 Grains, 1 Ogive Radius (734307903084)

Designed for volume production the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lees weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included #117-892.

Features:

- Rust resistant aluminum blocks
- Lathe bored blocks with steel bushings and alignment pins

Specifications:

- Material: Aluminum
- Capacity: 6
- Diameter: 0.311
- Bullet Style: Round Nose 1 Ogive Radius
- Handle Included: No
- Gas Check: No
- Bullet Weight: 93 Grains
- Mold Caliber: 32 Caliber


  • 6 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$31.75
Lee Precision - Mold Dc 356-125-2R - 2 Cavity Bullet Mold - 9mm Luger, 38 Super, 380 ACP (.356" Diameter), 125 Grains, 2 Ogive Radius (734307903091)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.356
- Bullet Style: Round Nose 2 Ogive Radius
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 125 Grains
- Mold Caliber: 35 Caliber / 9mm


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - 6 Cav H&G 68 200 Swc - 6 Cavity Bullet Mold - 45 ACP, 45 Auto Rim, 45 Colt (Long Colt) (.452" Dia), 200 Grains, Semi-Wadcutter (734307903107)

Designed for volume production the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lees weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included #117-892.

Features:

- Rust resistant aluminum blocks
- Lathe bored blocks with steel bushings and alignment pins

Specifications:

- Material: Aluminum
- Capacity: 6
- Diameter: 0.452
- Bullet Style: Semi-Wadcutter
- Handle Included: No
- Gas Check: No
- Bullet Weight: 200 Grains
- Mold Caliber: 45 Caliber


  • 6 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$40.54
Lee Precision - Mold Dc Tl314-90-Swc - 2 Cavity Bullet Mold - 32-20 WCF, 32 S&W Long, 32 Colt New Police (.314" Dia), 90gr, Tumble Lube SWC (734307903114)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.314
- Bullet Style: Semi-Wadcutter
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 90 Grains
- Mold Caliber: 32 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - Mold Dc 358-148 Wc - 2 Cavity Bullet Mold - 38 Spl, 357 Mag, 38 Colt New Police, 38 S&W (.358" Dia), 148gr, Wadcutter (734307903121)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.358
- Bullet Style: Wadcutter
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 148 Grains
- Mold Caliber: 38 Special 357 Mag


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$15.03
Lee Precision - 6 Cavity 358-105-Swc - 6 Cavity Bullet Mold - 38 Spl, 357 Mag, 38 Colt New Police, 38 S&W (.358" Dia), 105gr, Semi-Wadcutter (734307903152)

Designed for volume production the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lees weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included #117-892.

Features:

- Rust resistant aluminum blocks
- Lathe bored blocks with steel bushings and alignment pins

Specifications:

- Material: Aluminum
- Capacity: 6
- Diameter: 0.358
- Bullet Style: Semi-Wadcutter
- Handle Included: No
- Gas Check: No
- Bullet Weight: 105 Grains
- Mold Caliber: 38 Special 357 Mag


  • 6 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$31.75
Lee Precision - Mold Dc 358-105-Swc - 2 Cavity Bullet Mold - 38 Spl, 357 Mag, 38 Colt New Police, 38 S&W (.358" Dia), 105gr. Semi-Wadcutter (734307903169)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.358
- Bullet Style: Semi-Wadcutter
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 105 Grains
- Mold Caliber: 38 Special 357 Mag


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$15.03
Lee Precision - 6 Cavity 358-140-Swc - 6 Cavity Bullet Mold - 38 Sl, 357 Mag, 38 Colt New Police, 38 S&W (.358" Dia), 140gr, Semi-Wadcutter (734307903176)

Designed for volume production the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lees weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included #117-892.

Features:

- Rust resistant aluminum blocks
- Lathe bored blocks with steel bushings and alignment pins

Specifications:

- Material: Aluminum
- Capacity: 6
- Diameter: 0.358
- Bullet Style: Semi-Wadcutter
- Handle Included: No
- Gas Check: No
- Bullet Weight: 140 Grains
- Mold Caliber: 38 Special 357 Mag


  • 6 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$40.54
Lee Precision - Mold Dc 358-140-Swc - 2 Cavity Bullet Mold - 38 Spl, 357 Mag, 38 Colt New Police, 38 S&W (.358" Dia), 140gr, Semi-Wadcutter (734307903183)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.358
- Bullet Style: Semi-Wadcutter
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 140 Grains
- Mold Caliber: 38 Special 357 Mag


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$15.03
Lee Precision - Mold 6 Cav Tl358-158-2R - 6 Cavity Bullet Mold - 38 Spl, 357 Mag, 38 S&W (.358" Dia), 158gr, Tumble Lube 2 Ogive Radius (734307903190)

Designed for volume production the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lees weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included #117-892.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Cavities: 6
- Handles to open and shut the mold are sold separately item# 117-892

Specifications:

- Material: Aluminum
- Capacity: 6
- Diameter: 0.358
- Bullet Style: Round Nose 2 Ogive Radius
- Handle Included: No
- Gas Check: No
- Bullet Weight: 158 Grains
- Mold Caliber: 38 Special 357 Mag


  • 6 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$31.75
Lee Precision - Mold Dc Tl358-158Swc - 2 Cavity Bullet Mold - 38 Spl, 357 Mag, 38 Colt New Police, 38 S&W (.358 Dia), 158gr, Tumble Lube SWC (734307903213)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- angential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.358
- Bullet Style: Semi-Wadcutter
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 158 Grains
- Mold Caliber: 38 Special 357 Mag


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$15.03
Lee Precision - Mold Dc C358-158Swc - 2 Cavity Bullet Mold - 38 Spl, 357 Mag, 38 Colt New Police, 38 S&W (.358" Dia), 158gr, SWC Gas Check (734307903220)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- angential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.358
- Bullet Style: Semi-Wadcutter
- Handle Included: Yes
- Gas Check: Yes
- Bullet Weight: 158 Grains
- Mold Caliber: 38 Special 357 Mag


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - Mold Dc 379-250-Rf - 2 Cavity Bullet Mold - .375 Winchester, 38-55 WCF (.379" Diameter), 250 Grains, Flat Nose (734307903244)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- angential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.379
- Bullet Style: Flat Nose
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 250 Grains
- Mold Caliber: 38-55 WCF


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - 6 Cavity 358-150-1R - 6 Cavity Bullet Mold - 38 Spl, 357 Mag, 38 Colt New Police, 38 S&W (.358" Dia), 150gr, 1 Ogive Radius (734307903268)

Designed for volume production the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lees weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included #117-892.

Features:

- Rust resistant aluminum blocks
- Lathe bored blocks with steel bushings and alignment pins

Specifications:

- Material: Aluminum
- Capacity: 6
- Diameter: 0.358
- Bullet Style: Round Nose 1 Ogive Radius
- Handle Included: No
- Gas Check: No
- Bullet Weight: 150 Grains
- Mold Caliber: 38 Special 357 Mag


  • 6 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$40.54
Lee Precision - 6 Cavity C358-158 Swc - 6 Cavity Bullet Mold - 38 Spl, 357 Mag, 38 Colt New Police, 38 S&W (.358" Dia), 158gr, SWC Gas Check (734307903275)

Designed for volume production the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lees weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included #117-892.

Features:

- Rust resistant aluminum blocks
- Lathe bored blocks with steel bushings and alignment pins

Specifications:

- Material: Aluminum
- Capacity: 6
- Diameter: 0.358
- Bullet Style: Semi-Wadcutter
- Handle Included: No
- Gas Check: Yes
- Bullet Weight: 158 Grains
- Mold Caliber: 38 Special 357 Mag


  • 6 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$35.99
Lee Precision - Mold Dc 358-150-1R - 2 Cavity Bullet Mold - 38 Spl, 357 Mag, 38 Colt New Police, 38 S&W (.358" Dia), 150gr, 1 Ogive Radius (734307903282)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- angential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.358
- Bullet Style: Round Nose 1 Ogive Radius
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 150 Grains
- Mold Caliber: 38 Special 357 Mag


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - Mold Dc 410-195-Swc - 2 Cavity Bullet Mold - .41 Remington Magnum (.410" Diameter), 195 Grains, Semi-Wadcutter (734307903305)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.41
- Bullet Style: Semi-Wadcutter
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 195 Grains
- Mold Caliber: 41 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - Mold Dc Tl410-210-Swc - 2 Cavity Bullet Mold - 41 Remington Magnum (.410" Dia), 210 Grains, Tumble Lube SWC (734307903350)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.41
- Bullet Style: Semi-Wadcutter
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 210 Grains
- Mold Caliber: 41 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - Mold Dc 429-214-Swc - 2 Cavity Bullet Mold - .44 Special, 44 Remington Magnum, 44-40 WCF (.429" Dia), 214gr, Semi-Wadcutter (734307903367)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.429
- Bullet Style: Semi-Wadcutter
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 214 Grains
- Mold Caliber: 44 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - Mold Dc C429-240-Swc - 2 Cavity Bullet Mold - 44 Spl, 44 Rem Mag, 44-40 WCF (.429" Dia), 240gr, SWC Gas Check (734307903381)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.429
- Bullet Style: Semi-Wadcutter
- Handle Included: Yes
- Gas Check: Yes
- Bullet Weight: 240 Grains
- Mold Caliber: 44 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - 6 Cavity 429-240-2R - 6 Cavity Bullet Mold - 44 Remington Magnum, 44-40 WCF (.429" Diameter), 240 Grains, 2 Ogive Radius (734307903398)

Designed for volume production the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lees weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included #117-892.

Features:

- Rust resistant aluminum blocks
- Lathe bored blocks with steel bushings and alignment pins

Specifications:

- Material: Aluminum
- Capacity: 6
- Diameter: 0.429
- Bullet Style: Round Nose 2 Ogive Radius
- Handle Included: No
- Gas Check: No
- Bullet Weight: 240 Grains
- Mold Caliber: 44 Caliber


  • 6 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$40.54
Lee Precision - Mold Dc 429-240-2R - 2 Cavity Bullet Mold - .44 Special, 44 Remington Magnum, 44-40 WCF (.429" Dia), 240gr, 2 Ogive Radius (734307903411)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.429
- Bullet Style: Round Nose 2 Ogive Radius
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 240 Grains
- Mold Caliber: 44 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - Mold Dc Tl452-230-2R - 2 Cavity Bullet Mold - 45 ACP, 45 Auto Rim, 45 Colt (LC) (.452" Dia), 230gr, Tumble Lube 2 Ogive Radius (734307903466)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.452
- Bullet Style: Round Nose 2 Ogive Radius
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 230 Grains
- Mold Caliber: 45 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - Mold Dc H&G 68 200 Swc - 2 Cavity Bullet Mold - 45 ACP, 45 Auto Rim, 45 Colt (LC) (.452" Dia), 200gr, Semi-Wadcutter (734307903480)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.452
- Bullet Style: Semi-Wadcutter
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 200 Grains
- Mold Caliber: 45 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$15.03
Lee Precision - 6 Cavity 452-255-Rf - 6 Cavity Bullet Mold - 45 ACP, 45 Auto Rim, 45 Colt (Long Colt) (.452" Diameter), 255gr, Flat Nose (734307903497)

Designed for volume production the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lees weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included #117-892.

Features:

- Rust resistant aluminum blocks
- Lathe bored blocks with steel bushings and alignment pins

Specifications:

- Material: Aluminum
- Capacity: 6
- Diameter: 0.452
- Bullet Style: Flat Nose
- Handle Included: No
- Gas Check: No
- Bullet Weight: 225 Grains
- Mold Caliber: 45 Caliber


  • 6 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$40.54
Lee Precision - Mold 6 Cav Tl452-230-2R - 6 Cavity Bullet Mold - 45 Auto Rim, 45 Colt (LC) (.452" Dia), 230gr, Tumble Lube 2 Ogive Radius (734307903503)

Designed for volume production the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lees weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included #117-892.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Rust resistant aluminum blocks
- Lathe bored blocks with steel bushings and alignment pins
- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate

Specifications:

- Material: Aluminum
- Capacity: 6
- Diameter: 0.452
- Bullet Style: Round Nose 2 Ogive Radius
- Handle Included: No
- Gas Check: No
- Bullet Weight: 230 Grains
- Mold Caliber: 45 Caliber


  • 6 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$31.75
Lee Precision - Mold Dc 452-228-1R - 2 Cavity Bullet Mold - 45 ACP, 45 Auto Rim, 45 Colt (Long Colt) (.452" Diameter), 228gr, 1 Ogive Radius (734307903510)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.452
- Bullet Style: Round Nose 1 Ogive Radius
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 228 Grains
- Mold Caliber: 45 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - 6 Cavity 452-228 1R - 6 Cavity Bullet Mold - 45 Auto Rim, 45 Colt (Long Colt) (.452" Diameter), 228 Grains, 1 Ogive Radius (734307903527)

Designed for volume production the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lees weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included #117-892.

Features:

- Rust resistant aluminum blocks
- Lathe bored blocks with steel bushings and alignment pins

Specifications:

- Material: Aluminum
- Capacity: 6
- Diameter: 0.452
- Bullet Style: Round Nose 1 Ogive Radius
- Handle Included: No
- Gas Check: No
- Bullet Weight: 228 Grains
- Mold Caliber: 45 Caliber


  • 6 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$35.99
Lee Precision - Mold Dc 452-252-Swc - 2 Cavity Bullet Mold - 45 ACP, 45 Auto Rim, 45 Colt (Long Colt) (.452" Dia), 252gr Semi-Wadcutter (734307903565)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.452
- Bullet Style: Semi-Wadcutter
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 252 Grains
- Mold Caliber: 45 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$15.03
Lee Precision - 6 Cavity Tl430-240Swc - 6 Cavity Bullet Mold - 44 Special, 44 Remington Magnum, 44-40 WCF (.429" Dia), 240gr, 2 Ogive Radius (734307903572)

Designed for volume production the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lees weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included #117-892.

Features:

- Rust resistant aluminum blocks
- Lathe bored blocks with steel bushings and alignment pins

Specifications:

- Material: Aluminum
- Capacity: 6
- Diameter: 0.43
- Bullet Style: Semi-Wadcutter
- Handle Included: No
- Gas Check: No
- Bullet Weight: 240 Grains
- Mold Caliber: 44 Caliber


  • 6 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$35.99
Lee Precision - Mold Dc 452-255-Rf - 2 Cavity Bullet Mold - 45 ACP, 45 Auto Rim, 45 Colt (Long Colt) (.452" Diameter), 255 Grains, Flat Nose (734307903589)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.452
- Bullet Style: Flat Nose
- Handle Included: Yes
- Gas Check: No
- Bullet Weight: 255 Grains
- Mold Caliber: 45 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$15.03
Lee Precision - Mold Dc C452-300-Rf - 2 Cavity Bullet Mold - 45 Colt (Long Colt), 454 Casull (.452" Diameter), 300gr, Flat Nose Gas Check (734307903596)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.452
- Bullet Style: Flat Nose
- Handle Included: Yes
- Gas Check: Yes
- Bullet Weight: 300 Grains
- Mold Caliber: 45 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - Mold Dc C285-130-R - 2 Cavity Bullet Mold - 284 Caliber, 7mm (.285" Diameter), 130 Grains, 1 Ogive Radius Gas Check (734307903602)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.285
- Bullet Style: Round Nose 1 Ogive Radius
- Handle Included: Yes
- Gas Check: Yes
- Bullet Weight: 130 Grains
- Mold Caliber: 284 Caliber 7mm .284


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$15.03
Lee Precision - Mold Dc Ctl312-160-2R - 2 Cavity Bullet Mold - 7.62x39mm (.312" Dia), 160gr, Tumble Lube 2 Ogive Radius Gas Check (734307903619)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.312
- Bullet Style: Round Nose 2 Ogive Radius
- Handle Included: Yes
- Gas Check: Yes
- Bullet Weight: 160 Grains
- Mold Caliber: 30 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - Mold Dc 309-113-F - 2 Cavity Bullet Mold - .30 Caliber (.309" Diameter), 113 Grains, Flat Nose Gas Check (734307903626)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.309
- Bullet Style: Flat Nose
- Handle Included: Yes
- Gas Check: Yes
- Bullet Weight: 113 Grains
- Mold Caliber: 30 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - Mold Dc C309-150-F - 2 Cavity Bullet Mold - 30 Caliber (.309" Diameter), 150 Grains, Flat Nose Gas Check (734307903664)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.309
- Bullet Style: Flat Nose
- Handle Included: Yes
- Gas Check: Yes
- Bullet Weight: 150 Grains
- Mold Caliber: 30 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - Mold Dc C309-180-R - 2 Cavity Bullet Mold - 30 Caliber (.309" Diameter), 180 Grains, 1 Ogive Radius Gas Check (734307903695)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.309
- Bullet Style: Round Nose 1 Ogive Radius
- Handle Included: Yes
- Gas Check: Yes
- Bullet Weight: 180 Grains
- Mold Caliber: 30 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$15.03
Lee Precision - Mold Dc C309-200-R - 2 Cavity Bullet Mold - 30 Caliber (.309" Diameter), 200 Grains, 1 Ogive Radius Gas Check (734307903701)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.309
- Bullet Style: Round Nose 1 Ogive Radius
- Handle Included: Yes
- Gas Check: Yes
- Bullet Weight: 200 Grains
- Mold Caliber: 30 Caliber


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Lee Precision - Mold Dc C312-185-1R - 2 Cavity Bullet Mold - 303 British (.312" Diameter), 185 Grains, 1 Ogive Radius Gas Check (734307903718)

Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lees weights with suggested alloy; actual weight may vary due to the alloy mixture used.

Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity reducing the diameter of the bullets cast from the treated mold. Instead Lee Precision recommends smoking the mold with a wooden match beeswax candle or a butane lighter as described in their provided bullet mold instructions.

Features:

- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Tangential cut off which helps to eliminate the nip at the sprue cut off
- Hardwood Handles

Specifications:

- Material: Aluminum
- Capacity: 2
- Diameter: 0.312
- Bullet Style: Round Nose 1 Ogive Radius
- Handle Included: Yes
- Gas Check: Yes
- Bullet Weight: 185 Grains
- Mold Caliber: 303 British


  • 2 Cavity Bullet Mold
  • Brand: Lees Reloading


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$19.19
Per Page      1 - 50 of 213