Bullets

Sort By:  
Hornady - 6.5mm/.264 Caliber (0.264" Diameter) Bullets - ELD Match, 140 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255263312)

conventional polymer tips in high bc bullets melt in flight. hornady engineers discovered that conventional bullet tip materials in streamlined high bc bullets melt and deform. although not a significant issue affecting moderate bc conventional tipped varmint and hunting bullets aerodynamic heating causes bc reduction and degradation of accuracy particularly at extended ranges 400 yds +. to counter this effect hornady identified a heat resistant polymer and developed the patent pending heat shield tip. this revolutionary new tip creates the perfect meplat tip with exceptionally consistent results from bullet-to-bullet and lot-to-lot.

the heat shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat tip that is always the same shape. a streamlined secant ogive with optimum boattail design plus the highly concentric amp bullet jackets combined with the patent pending heat shield tip creates a supremely accurate high bc match bullet. eld-match bullet bcs are measured with doppler radar and corrected to standard atmospheric conditions.

features:

- heat shield tip forms the perfect meplat
- no tip deformation from aerodynamic heating
- extremely low drag bullet profile delivers high ballistic coefficients
- swaged lead core provided uniformity and balance
- amp jacket design for optimum concentricity and accuracy

specifications:

technical information:

- caliber: 264 6.5mm
- bullet diameter: 0.264
- bullet weight: 140 grains
- bullet style: polymer tipped boat tail
- bullet coating: non-coated
- quantity: 100 bullets

ballistics information

- sectional density: 0.287
- ballistic coefficient: 0.610

note: these are component bullets not loaded ammunition


  • 6.5mm bullets

Thank you for shopping at Survivorsparadise.com!


$34.92
Hornady - 6.5mm/.264 Caliber (0.264" Diameter) Bullets - ELD-X, 143 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255226355)

conventional polymer tips in high bc bullets melt in flight. hornady engineers discovered that conventional bullet tip materials in streamlined high bc bullets melt and deform. although not a significant issue affecting moderate bc conventional tipped varmint and hunting bullets aerodynamic heating causes bc reduction and degradation of accuracy particularly at extended ranges 400 yds +. to counter this effect hornady identified a heat resistant polymer and developed the patent pending heat shield tip. this revolutionary new tip creates the perfect meplat tip with exceptionally consistent results from bullet-to-bullet and lot-to-lot.

the heat shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat tip that is always the same shape. a streamlined secant ogive with optimum boattail design plus the highly concentric amp bullet jackets combined with the patent pending heat shield tip creates a supremely accurate high bc match bullet. eld-match bullet bcs are measured with doppler radar and corrected to standard atmospheric conditions. with high velocity 0-400 yard impact the bullet continually expands throughout its penetration path. the thick shank of the

jacket and high interlock ring keep the core and jacket together providing 50-60% weight retention. upon low velocity 400+ yard impacts the heat shield tip drives backward into the bullet to initiate expansion. exhibiting conventional expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities. this is not loaded ammunition.

features:

- heat shield tip forms the perfect meplat
- no tip deformation from aerodynamic heating
- match accurate hunting bullet
- devastating terminal performance at all ranges

specifications:

- caliber: 264 6.5mm
- bullet diameter: 0.264
- bullet weight: 143 grains
- bullet style: polymer tipped boat tail
- bullet coating: non-coated
- quantity: 100 bullets

ballistics information:

- sectional density: 0.293
- g1 ballistic coefficient: 0.620
- g7 ballistic coefficient: 0.311

note: these are component bullets not loaded ammunition


  • 6.5mm bullets

Thank you for shopping at Survivorsparadise.com!


$37.50
Hornady - 7mm/.284 Caliber (0.284" Diameter) Bullets - ELD-X, 162 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255228403)

conventional polymer tips in high bc bullets melt in flight. hornady engineers discovered that conventional bullet tip materials in streamlined high bc bullets melt and deform. although not a significant issue affecting moderate bc conventional tipped varmint and hunting bullets aerodynamic heating causes bc reduction and degradation of accuracy particularly at extended ranges 400 yds +. to counter this effect hornady identified a heat resistant polymer and developed the patent pending heat shield tip. this revolutionary new tip creates the perfect meplat tip with exceptionally consistent results from bullet-to-bullet and lot-to-lot.

the heat shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat tip that is always the same shape. a streamlined secant ogive with optimum boattail design plus the highly concentric amp bullet jackets combined with the patent pending heat shield tip creates a supremely accurate high bc match bullet. eld-match bullet bcs are measured with doppler radar and corrected to standard atmospheric conditions. with high velocity 0-400 yard impact the bullet continually expands throughout its penetration path.

the thick shank of the jacket and high interlock ring keep the core and jacket together providing 50-60% weight retention. upon low velocity 400+ yard impacts the heat shield tip drives backward into the bullet to initiate expansion. exhibiting conventional expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities. this is not loaded ammunition.

features:

- heat shield tip forms the perfect meplat
- no tip deformation from aerodynamic heating
- match accurate hunting bullet
- devastating terminal performance at all ranges

specifications:

- caliber: 284 7mm
- bullet diameter: 0.284
- bullet weight: 162 grains
- bullet style: polymer tipped boat tail
- bullet coating: non-coated
- quantity: 100 bullets

ballistics information:

- sectional density: 0.287
- g1 ballistic coefficient: 0.613
- g7 ballistic coefficient: 0.308

note: these are component bullets not loaded ammunition


  • 7mm bullets

Thank you for shopping at Survivorsparadise.com!


$37.50
Hornady - 7mm/.284 Caliber (0.284" Diameter) Bullets - ELD Match, 162 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255284034)

conventional polymer tips in high bc bullets melt in flight. hornady engineers discovered that conventional bullet tip materials in streamlined high bc bullets melt and deform. although not a significant issue affecting moderate bc conventional tipped varmint and hunting bullets aerodynamic heating causes bc reduction and degradation of accuracy particularly at extended ranges 400 yds +. to counter this effect hornady identified a heat resistant polymer and developed the patent pending heat shield tip. this revolutionary new tip creates the perfect meplat tip with exceptionally consistent results from bullet-to-bullet and lot-to-lot.

the heat shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat tip that is always the same shape. a streamlined secant ogive with optimum boattail design plus the highly concentric amp bullet jackets combined with the patent pending heat shield tip creates a supremely accurate high bc match bullet. eld-match bullet bcs are measured with doppler radar and corrected to standard atmospheric conditions.

features:

- caliber: 284 7mm
- bullet diameter: 0.284
- bullet weight: 162 grains
- bullet style: polymer tipped boat tail
- bullet coating: non-coated
- quantity: 100 bullets

ballistics information

- sectional density: 0.287
- ballistic coefficient: 0.627

note: these are component bullets not loaded ammunition


  • 7mm bullets

Thank you for shopping at Survivorsparadise.com!


$34.92
Hornady - 7mm/.284 Caliber (0.284" Diameter) Bullets - ELD-X, 175 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255228410)

conventional polymer tips in high bc bullets melt in flight. hornady engineers discovered that conventional bullet tip materials in streamlined high bc bullets melt and deform. although not a significant issue affecting moderate bc conventional tipped varmint and hunting bullets aerodynamic heating causes bc reduction and degradation of accuracy particularly at extended ranges 400 yds +. to counter this effect hornady identified a heat resistant polymer and developed the patent pending heat shield tip. this revolutionary new tip creates the perfect meplat tip with exceptionally consistent results from bullet-to-bullet and lot-to-lot.

the heat shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat tip that is always the same shape. a streamlined secant ogive with optimum boattail design plus the highly concentric amp bullet jackets combined with the patent pending heat shield tip creates a supremely accurate high bc match bullet. eld-match bullet bcs are measured with doppler radar and corrected to standard atmospheric conditions. with high velocity 0-400 yard impact the bullet continually expands throughout its penetration path.

the thick shank of the jacket and high interlock ring keep the core and jacket together providing 50-60% weight retention. upon low velocity 400+ yard impacts the heat shield tip drives backward into the bullet to initiate expansion. exhibiting conventional expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities. this is not loaded ammunition.

features:

- heat shield tip forms the perfect meplat
- no tip deformation from aerodynamic heating
- match accurate hunting bullet
- devastating terminal performance at all ranges

specifications:

- caliber: 284 7mm
- bullet diameter: 0.284
- bullet weight: 175 grains
- bullet style: polymer tipped boat tail
- bullet coating: non-coated
- quantity: 100 bullets

ballistics information

- sectional density: 0.268
- g1 ballistic coefficient: 0.660
- g7 ballistic coefficient: 0.330

note: these are component bullets not loaded ammunition


  • 7mm bullets

Thank you for shopping at Survivorsparadise.com!


$37.50
Hornady - .30 Caliber (0.308" Diameter) Bullets - GMX, 125 Grains, Lead Free, Polymer Tip Boat Tail (BT), Per 50 (090255301908)

hornady gmx bullets and factory ammunition offer the hunter who favors an expanding monolithic bullet a better choice.

gmx bullets are constructed of a monolithic copper alloy that doesnt foul like sticky solid copper and features strategically located grooves in the bearing surface of the bullet reduce pressure. these additions make the gmx easy to load using standard published data for comparable hornady sst bullets.

hornady engineers designed the gmx bullet to perform across a very wide range of velocities - from +3400 to 2000 fps. and perform it does. gmx bullets are designed to expand to 1.5 times their original diameter and retain over 95% of their original weight. theyre no slouch in the penetration department either routinely penetrating over 30 in gelatin tests.

features:

- copper alloy construction: monolithic copper alloy bullets deliver controlled expansion and 95+% weight retention
- crimping cannelure and pressure relieving grooves: reduces both bearing surface and fouling and aids in consistent reloads.
- high weight-retention: high weight-retention is a significant benefit to the gmx and monolithic family of bullets routinely retaining 95% or more of their original weight.

specifications:

- ballistic coefficient g1: .295
- sectional density: .185
- quantity: 50/box


  • 30 caliber bullets

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$28.76
Hornady - .30 Caliber (0.308" Diameter) Bullets - GMX, 110 Grains, Lead Free, Polymer Tip Boat Tail (BT), Per 50 (090255301915)

hornady gmx bullets and factory ammunition offer the hunter who favors an expanding monolithic bullet a better choice.

gmx bullets are constructed of a monolithic copper alloy that doesnt foul like sticky solid copper and features strategically located grooves in the bearing surface of the bullet reduce pressure. these additions make the gmx easy to load using standard published data for comparable hornady sst bullets.

hornady engineers designed the gmx bullet to perform across a very wide range of velocities - from +3400 to 2000 fps. and perform it does. gmx bullets are designed to expand to 1.5 times their original diameter and retain over 95% of their original weight. theyre no slouch in the penetration department either routinely penetrating over 30 in gelatin tests.

features:

- copper alloy construction: monolithic copper alloy bullets deliver controlled expansion and 95+% weight retention
- crimping cannelure and pressure relieving grooves: reduces both bearing surface and fouling and aids in consistent reloads.
- high weight-retention: high weight-retention is a significant benefit to the gmx and monolithic family of bullets routinely retaining 95% or more of their original weight.

specifications:

- ballistic coefficient g1: .305
- sectional density: .166
- quantity: 50/box


  • 30 caliber bullets

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$30.66
Hornady - .30 Caliber (0.308" Diameter) Bullets - 125 Grains, Hollow Point (HP), Per 100 (090255301922)

all hornady match bullets feature revolutionary amp advanced manufacturing process bullet jackets. developed by hornady engineersthese bullet jackets are a technological advancement in design tooling and manufacturing that combine to produce the most consistently concentric bullet jackets available.these amp jackets are the foundation for exceptional bullet accuracy and have virtually zero tolerance for concentricity and near zero wall thickness variation. coupled with precision swaged cores and manufactured to the tightest standards in the industry all hornady match bullets provide superior consistency high ballistic coefficients and unprecedented levels of accuracy.

30 cal .308 125 gr hp

features:

- secant ogive profile: the geometric profile works to produce low drag and flatter trajectories.the secant ogive design also provides the optimum bearing surface for stability in flight and the best ballistic coefficient possible.
- swaged lead core: the swaging process provides excellent uniformity and balance for consistent performance and accuracy.
- amp jacket: the jacket has virtually zero tolerance for concentricity and near zero wall thickness variation.
- boattail: the angle and length of the boattail is unique to each caliber and weight of match and a-max bullets to maximize ballistic coefficient and accuracy.

specifications:

- ballistic coefficient g1: .320
- sectional density: .185
- quantity: 100/box


  • 30 caliber bullets

Thank you for shopping at Survivorsparadise.com!


$30.55
Hornady - .30 Caliber (0.308" Diameter) Bullets - GMX, 180 Grains, Lead Free Polymer Tip Boat Tail (BT), Per 50 (090255301939)

hornady gmx bullets and factory ammunition offer the hunter who favors an expanding monolithic bullet a better choice.

gmx bullets are constructed of a monolithic copper alloy that doesnt foul like sticky solid copper and features strategically located grooves in the bearing surface of the bullet reduce pressure. these additions make the gmx easy to load using standard published data for comparable hornady sst bullets.

hornady engineers designed the gmx bullet to perform across a very wide range of velocities - from +3400 to 2000 fps. and perform it does. gmx bullets are designed to expand to 1.5 times their original diameter and retain over 95% of their original weight. theyre no slouch in the penetration department either routinely penetrating over 30 in gelatin tests.

features:

- copper alloy construction: monolithic copper alloy bullets deliver controlled expansion and 95+% weight retention
- crimping cannelure and pressure relieving grooves: reduces both bearing surface and fouling and aids in consistent reloads.
- high weight-retention: high weight-retention is a significant benefit to the gmx and monolithic family of bullets routinely retaining 95% or more of their original weight.

specifications:

- ballistic coefficient g1: .485
- sectional density: .271
- quantity: 50/box


  • 30 caliber bullets

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$29.79
Hornady - .30 Caliber (0.308" Diameter) Bullets - ELD Match, 208 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255307313)

conventional polymer tips in high bc bullets melt in flight. hornady engineers discovered that conventional bullet tip materials in streamlined high bc bullets melt and deform. although not a significant issue affecting moderate bc conventional tipped varmint and hunting bullets aerodynamic heating causes bc reduction and degradation of accuracy particularly at extended ranges 400 yds +. to counter this effect hornady identified a heat resistant polymer and developed the patent pending heat shield tip. this revolutionary new tip creates the perfect meplat tip with exceptionally consistent results from bullet-to-bullet and lot-to-lot.

the heat shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat tip that is always the same shape. a streamlined secant ogive with optimum boattail design plus the highly concentric amp bullet jackets combined with the patent pending heat shield tip creates a supremely accurate high bc match bullet. eld-match bullet bcs are measured with doppler radar and corrected to standard atmospheric conditions.

features:

- heat shield tip forms the perfect meplat
- no tip deformation from aerodynamic heating
- extremely low drag bullet profile delivers high ballistic coefficients
- swaged lead core provided uniformity and balance
- amp jacket design for optimum concentricity and accuracy

specifications:

- caliber: 30
- bullet diameter: 0.308
- bullet weight: 208 grains
- bullet style: polymer tipped boat tail
- bullet coating: non-coated
- quantity: 100 bullets

ballistics information:

- sectional density: 0.313
- ballistic coefficient: 0.670

note: these are component bullets not loaded ammunition


  • 30 caliber bullets

Thank you for shopping at Survivorsparadise.com!


$39.38
Hornady - .30 Caliber (0.308" Diameter) Bullets - ELD-X, 200 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255230765)

conventional polymer tips in high bc bullets melt in flight. hornady engineers discovered that conventional bullet tip materials in streamlined high bc bullets melt and deform. although not a significant issue affecting moderate bc conventional tipped varmint and hunting bullets aerodynamic heating causes bc reduction and degradation of accuracy particularly at extended ranges 400 yds +. to counter this effect hornady identified a heat resistant polymer and developed the patent pending heat shield tip. this revolutionary new tip creates the perfect meplat tip with exceptionally consistent results from bullet-to-bullet and lot-to-lot.

the heat shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat tip that is always the same shape. a streamlined secant ogive with optimum boattail design plus the highly concentric amp bullet jackets combined with the patent pending heat shield tip creates a supremely accurate high bc match bullet. eld-match bullet bcs are measured with doppler radar and corrected to standard atmospheric conditions. with high velocity 0-400 yard impact the bullet continually expands throughout its penetration path.

the thick shank of the jacket and high interlock ring keep the core and jacket together providing 50-60% weight retention. upon low velocity 400+ yard impacts the heat shield tip drives backward into the bullet to initiate expansion. exhibiting conventional expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities. this is not loaded ammunition.

features:

- heat shield tip forms the perfect meplat
- no tip deformation from aerodynamic heating
- match accurate hunting bullet
- devastating terminal performance at all ranges

specifications:

- caliber: 30
- bullet diameter: 0.308
- bullet weight: 200 grains
- bullet style: polymer tipped boat tail
- bullet coating: non-coated
- quantity: 100 bullets

ballistics information:

- sectional density: 0.301
- g1 ballistic coefficient: 0.626
- g7 ballistic coefficient: 0.315

note: these are component bullets not loaded ammunition


  • 30 caliber bullets

Thank you for shopping at Survivorsparadise.com!


$41.96
Hornady - .30 Caliber (0.308" Diameter) Bullets - ELD-X, 212 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255230772)

conventional polymer tips in high bc bullets melt in flight. hornady engineers discovered that conventional bullet tip materials in streamlined high bc bullets melt and deform. although not a significant issue affecting moderate bc conventional tipped varmint and hunting bullets aerodynamic heating causes bc reduction and degradation of accuracy particularly at extended ranges 400 yds +. to counter this effect hornady identified a heat resistant polymer and developed the patent pending heat shield tip. this revolutionary new tip creates the perfect meplat tip with exceptionally consistent results from bullet-to-bullet and lot-to-lot.

the heat shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat tip that is always the same shape. a streamlined secant ogive with optimum boattail design plus the highly concentric amp bullet jackets combined with the patent pending heat shield tip creates a supremely accurate high bc match bullet. eld-match bullet bcs are measured with doppler radar and corrected to standard atmospheric conditions. with high velocity 0-400 yard impact the bullet continually expands throughout its penetration path.

the thick shank of the jacket and high interlock ring keep the core and jacket together providing 50-60% weight retention. upon low velocity 400+ yard impacts the heat shield tip drives backward into the bullet to initiate expansion. exhibiting conventional expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities. this is not loaded ammunition.

features:

- heat shield tip forms the perfect meplat
- no tip deformation from aerodynamic heating
- match accurate hunting bullet
- devastating terminal performance at all ranges

specifications:

- caliber: 30
- bullet diameter: 0.308
- bullet weight: 212 grains
- bullet style: polymer tipped boat tail
- bullet coating: non-coated
- quantity: 100 bullets

ballistics information

- sectional density: 0.319
- g1 ballistic coefficient: 0.673
- g7 ballistic coefficient: 0.336

note: these are component bullets not loaded ammunition


  • 30 caliber bullets

Thank you for shopping at Survivorsparadise.com!


$41.96
Hornady - .30 Caliber (0.308" Diameter) Bullets - ELD-X, 220 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255230789)

conventional polymer tips in high bc bullets melt in flight. hornady engineers discovered that conventional bullet tip materials in streamlined high bc bullets melt and deform. although not a significant issue affecting moderate bc conventional tipped varmint and hunting bullets aerodynamic heating causes bc reduction and degradation of accuracy particularly at extended ranges 400 yds +. to counter this effect hornady identified a heat resistant polymer and developed the patent pending heat shield tip. this revolutionary new tip creates the perfect meplat tip with exceptionally consistent results from bullet-to-bullet and lot-to-lot.

the heat shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat tip that is always the same shape. a streamlined secant ogive with optimum boattail design plus the highly concentric amp bullet jackets combined with the patent pending heat shield tip creates a supremely accurate high bc match bullet. eld-match bullet bcs are measured with doppler radar and corrected to standard atmospheric conditions. with high velocity 0-400 yard impact the bullet continually expands throughout its penetration path. the thick shank of the jacket and high interlock ring keep the core and jacket together providing 50-60% weight retention. upon low velocity 400+ yard impacts the heat shield tip drives backward into the bullet to initiate expansion. exhibiting conventional expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities. this is not loaded ammunition.

features:

- heat shield tip forms the perfect meplat
- no tip deformation from aerodynamic heating
- match accurate hunting bullet
- devastating terminal performance at all ranges

specifications:

- caliber: 30
- bullet diameter: 0.308
- bullet weight: 220 grains
- bullet style: polymer tipped boat tail
- bullet coating: non-coated
- quantity: 100 bullets

ballistics information:

- sectional density: 0.331
- g1 ballistic coefficient: 0.650
- g7 ballistic coefficient: 0.325

note: these are component bullets not loaded ammunition


  • 30 caliber bullets

Thank you for shopping at Survivorsparadise.com!


$41.96
Hornady - .338 Caliber (0.338" Diameter) Bullets - ELD Match, 285 Grains, Polymer Tip Boat Tail (BT),Per 50 (090255333817)

conventional polymer tips in high bc bullets melt in flight. hornady engineers discovered that conventional bullet tip materials in streamlined high bc bullets melt and deform. although not a significant issue affecting moderate bc conventional tipped varmint and hunting bullets aerodynamic heating causes bc reduction and degradation of accuracy particularly at extended ranges 400 yds +. to counter this effect hornady identified a heat resistant polymer and developed the patent pending heat shield tip. this revolutionary new tip creates the perfect meplat tip with exceptionally consistent results from bullet-to-bullet and lot-to-lot.

the heat shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat tip that is always the same shape. a streamlined secant ogive with optimum boattail design plus the highly concentric amp bullet jackets combined with the patent pending heat shield tip creates a supremely accurate high bc match bullet. eld-match bullet bcs are measured with doppler radar and corrected to standard atmospheric conditions.

features:

- heat shield tip forms the perfect meplat
- no tip deformation from aerodynamic heating
- extremely low drag bullet profile delivers high ballistic coefficients
- swaged lead core provided uniformity and balance
- amp jacket design for optimum concentricity and accuracy

specifications:

- caliber: 338
- bullet diameter: 0.338
- bullet weight: 285 grains
- bullet style: polymer tipped boat tail
- bullet coating: non-coated
- quantity: 50 bullet

ballistics information:

- sectional density: 0.356
- ballistic coefficient: 0.789

note: these are component bullets not loaded ammunition


  • 338 caliber bullets

Thank you for shopping at Survivorsparadise.com!


$41.35
Nosler - Nosler RDF - .30, 175 Grain, Jacketed Hollow Point, Per 500 (054041531719)

for those wanting to squeeze the most performance from their competition rifle noslers rdf reduced drag factor match bullet line is the ideal choice. noslers rdf line was designed from the ground up to provide exceptionally high bcs which create the flattest trajectory and least wind drift possible. the keys to the rdfs outstanding performance are noslers meticulously optimized compound ogive and long drag reducing boattail which make handloading a snap and create an incredibly sleek form factor. rdf bullets also have the smallest most consistent meplats of any hollow point match bullet line so there is no need to point or trim tips.

features:

- no bullet prep
- no trimming the meplat
- tighter groups
- flat trajectory
- wind drift resistant design

specifications:

- caliber: 30
- bullet diameter: 0.308
- bullet weight: 175 grains
- bullet style: jacketed hollow point boat tail
- bullet length: 1.33
- bullet coating: non-coated
- quantity: per 500

ballistic informations:

- sectional density0.264
- ballistic coefficient0.536

note: these are component bullets not loaded ammunition


  • nosler rdf

Thank you for shopping at Survivorsparadise.com!


$193.13
Nosler - RDF - 6.5mm, 140 Grain, Hollow Point Boat Tail, Per 500 (054041498258)

for those wanting to squeeze the most performance from their competition rifle noslers rdf reduced drag factor match bullet line is the ideal choice. noslers rdf line was designed from the ground up to provide exceptionally high bcs which create the flattest trajectory and least wind drift possible. the keys to the rdfs outstanding performance are noslers meticulously optimized compound ogive and long drag reducing boattail which make handloading a snap and create an incredibly sleek form factor. rdf bullets also have the smallest most consistent meplats of any hollow point match bullet line so there is no need to point or trim tips.

features:

- no bullet prep
- no trimming the meplat
- tighter groups
- flat trajectory
- wind drift resistant design

specifications:

- caliber: 6.5mm/264 caliber
- bullet diameter: 0.264
- bullet weight: 140 grains
- bullet length: 1.42
- bullet style: jacketed hollow point boat tail
- bullet coating: non-coated
- quantity: 500 rounds

ballistic information:

- sectional density: 0.287

note: these are component bullets not loaded ammunition


  • rdf hollow point boat tail

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$178.38
Hornady - .30 Caliber (0.308" Diameter) Bullets - ELD Match, 168 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255305067)

eld match bullets are technologically advanced enhanced accuracy target bullets featuring heat shield tips with the perfect meplat tip point combined with numerous design features that deliver the highest-in-class ballistic coefficients superior accuracy and extreme consistency from bullet-to-bullet lot-to-lot.

specifications:

- bullets only
- caliber: 30 caliber
- diameter: .308
- grain: 168
- ballistic coefficient g1: .523
- ballistic coefficient g7: .263
- sectional density: .253
- quantity: 100/box


  • 30 caliber bullets

Thank you for shopping at Survivorsparadise.com!


$34.92
Hornady - .30 Caliber (0.308" Diameter) Bullets - ELD Match, 178 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255307139)

eld match bullets are technologically advanced enhanced accuracy target bullets featuring heat shield tips with the perfect meplat tip point combined with numerous design features that deliver the highest-in-class ballistic coefficients superior accuracy and extreme consistency from bullet-to-bullet lot-to-lot.

specifications:

- bullets only
- caliber: 30 caliber
- diameter: .308
- grain: 178
- ballistic coefficient g1: .547
- ballistic coefficient g7: .275
- sectional density: .268
- quantity: 100/box


  • 30 caliber bullets

Thank you for shopping at Survivorsparadise.com!


$34.92
Hornady - .22 Caliber (0.224" Diameter) Bullets - ELD Match, 52 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255224917)

ELD Match bullets are technologically advanced enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT tip point combined with numerous design features that deliver the highest-in-class ballistic coefficients superior accuracy and extreme consistency from bullet-to-bullet lot-to-lot.

Specifications:

- Bullets Only
- Caliber: 22 Caliber
- Diameter: .224
- Grain: 52
- Ballistic Coefficient G1: .247
- Sectional Density: .148
- Quantity: 100/Box


  • 22 Caliber Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$21.86
Hornady - .22 Caliber (0.224" Diameter) Bullets - 62 Grains, Full Metal Jacket Boat Tail (FMJ/BT), Per 5500 (090255266269)

Hornady FMJ bullets are built with a rugged AMP bullet jacket Advanced Manufacturing Process that clearly delivers better performance. The thin-plated full metal jacket offered by other manufacturers is easily distorted and often breaks or separates when the bullet impacts the target. The Hornady AMP bullet jacket features virtually zero tolerance for concentricity and near-zero wall thickness variation punching through targets without deforming or breaking.

Specifications:

- Bullets Only
- Caliber: 22 Cal .224
- Grain: 62
- Full Metal Jacket
- Ballistic Coefficient G1: .274
- Sectional Density: .177
- Quantity: 5500/Box


  • 22 Caliber Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$518.81
Hornady - .22 Caliber (0.224" Diameter) Bullets - ELD Match, 75 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255227918)

ELD Match bullets are technologically advanced enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT tip point combined with numerous design features that deliver the highest-in-class ballistic coefficients superior accuracy and extreme consistency from bullet-to-bullet lot-to-lot.

Specifications:

- Bullets Only
- Caliber: 22 Caliber
- Diameter: .224
- Grain: 75
- Ballistic Coefficient G1: .467
- Ballistic Coefficient G7: .235
- Sectional Density: .214
- Quantity: 100/Box


  • 22 Caliber Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$22.52
Hornady - .25 Caliber (0.257" Diameter) Bullets - FTX, 110 Grains, Flex Tip eXpanding, Polymer Tip Flat Base (FB), Per 100 (090255709773)

Hornady FTX bullets revolutionized lever-gun ballistics creating a whole new level of performance for these popular firearms. Lever-gun enthusiasts can now harness the accuracy power and long-range performance of a tipped bullet thats safe to load in tubular magazines.

The patented Flex Tip combined with Hornady pioneered secant ogive design creates an aerodynamic bullet with a thinner tapered front section and extended bearing surface for much higher ballistic coefficients. The FTX flies faster and flatter than traditional lever--gun bullets resulting in improved accuracy at ranges well beyond what was historically common.

The one-piece high antimony lead core of the FTX bullet is locked to the jacket with an InterLock ring resulting in reliable performance and deep penetration on large or heavy-bodied game animals. Designed to perform at muzzle velocities from 1600 to 2600 fps FTX bullets are ideal for hunters and shooters looking to give their lever gun new life.

Features:

- Patented Flex Tip Bullet Technology: Upon impact the soft tip compresses into the bullet initiated immediate expansion across a wide range of velocities. Safe to shoot in tubular magazines as well as any other firearm.
- InterLock Ring: Mechanically locks the core and jacket together for maximum weight retention and deep penetration.
- Ballistically Efficient Secant Ogive: Pioneered by Hornady the secant ogive profile delivers stability flat trajectories and amazing accuracy.
- Specially Engineered Jacket: The heavy jacket over the shank of the bullet combined with our proven InterLock design controls expansion and enhances accuracy.

Specifications:

- Bullets Only
- Caliber: 25 Cal .257
- Grain: 110
- Flex Tip
- Ballistic Coefficient G1: .340
- Sectional Density: .238
- Quantity: 100/Box


  • 25 Caliber Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$23.00
Hornady - 6.5mm/.264 Caliber (0.264" Diameter) Bullets - ELD Match, 100 Grains, Polymer Boat Tail (BT), Per 100 (090255709490)

ELD Match bullets are technologically advanced enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT tip point combined with numerous design features that deliver the highest-in-class ballistic coefficients superior accuracy and extreme consistency from bullet-to-bullet lot-to-lot.

Specifications:

- Bullets Only
- Caliber: 6.5mm
- Diameter: .264
- Grain: 100
- Ballistic Coefficient G1: .385
- Ballistic Coefficient G7: .194
- Sectional Density: .205
- Quantity: 100/Box


  • 6.5mm Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$34.92
Hornady - 6.5mm/.264 Caliber (0.264" Diameter) Bullets - ELD Match, 120 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255261752)

ELD Match bullets are technologically advanced enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT tip point combined with numerous design features that deliver the highest-in-class ballistic coefficients superior accuracy and extreme consistency from bullet-to-bullet lot-to-lot.

Specifications:

- Bullets Only
- Caliber: 6.5mm
- Diameter: .264
- Grain: 120
- Ballistic Coefficient G1: .486
- Ballistic Coefficient G7: .245
- Sectional Density: .246
- Quantity: 100/Box


  • 6.5mm Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$34.92
Hornady - 6.5mm/.264 Caliber (0.264" Diameter) Bullets - ELD Match, 123 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255261769)

ELD Match bullets are technologically advanced enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT tip point combined with numerous design features that deliver the highest-in-class ballistic coefficients superior accuracy and extreme consistency from bullet-to-bullet lot-to-lot.

Specifications:

- Bullets Only
- Caliber: 6.5mm
- Diameter: .264
- Grain: 123
- Ballistic Coefficient G1: .506
- Ballistic Coefficient G7: .255
- Sectional Density: .252
- Quantity: 100/Box


  • 6.5mm Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$34.92
Hornady - 6.5mm/.264 Caliber (0.264" Diameter) Bullets - ELD Match, 147 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255263336)

ELD Match bullets are technologically advanced enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT tip point combined with numerous design features that deliver the highest-in-class ballistic coefficients superior accuracy and extreme consistency from bullet-to-bullet lot-to-lot.

Specifications:

- Bullets Only
- Caliber: 6.5mm
- Diameter: .264
- Grain: 147
- Ballistic Coefficient G1: .697
- Ballistic Coefficient G7: .351
- Sectional Density: .301
- Quantity: 100/Box


  • 6.5mm Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$34.92
Hornady - .270 Caliber (0.277" Diameter) Bullets - ELD-X, 145 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255273564)

The ELD-X bullet is a technologically advanced match accurate ALL-RANGE hunting bullet featuring highest-in-class ballistic coefficients and consistent controlled expansion at ALL practical hunting distances.

All commonly used polymer tips in high BC bullets melt in flight. Hornady engineers discovered that commonly used bullet tip materials in streamlined high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets aerodynamic heating causes BC reduction and degradation of accuracy particularly at extended ranges 400 yds +. To counter this effect Hornady identified a heat resistant polymer and developed the Heat Shield tip. This revolutionary new tip creates the perfect meplat tip with exceptionally consistent results from bullet-to-bullet and lot-to-lot.

Features:

- Best-in-class BCs: Verified by Doppler radar the Heat Shield tip defies the effects of aerodynamic heating and retains its shape to maintain the highest in-class BC over its entire trajectory.
- Match accurate hunting bullet: Streamlined secant ogive with optimum boattail design + highly concentric AMP bullet jackets + Heat Shield tip combine for radically superior aerodynamic efficiency.
- Devastating conventional range performance: With high velocity 0-400 yard impact the bullet continually expands throughout its penetration path. The thick shank of the jacket and high Interlock ring keep the core and jacket together providing 50-60% weight retention.
- Best extended range terminal performance available: Upon low velocity 400+ yard impacts the Heat Shield tip drives backward into the bullet to initiate expansion. Exhibiting expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities. Available as component bullets or in factory loaded Precision Hunter ammunition.

Specifications:

- Bullets Only
- Caliber: 270 Cal .277
- Grain: 145
- Ballistic Coefficient G1: .536
- Ballistic Coefficient G7: .270
- Sectional Density: .270
- Quantity: 100/Box


  • 270 Caliber Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$37.50
Hornady - 7mm/.284 Caliber (0.284" Diameter) Bullets - ELD-X, 150 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255228267)

The ELD-X bullet is a technologically advanced match accurate ALL-RANGE hunting bullet featuring highest-in-class ballistic coefficients and consistent controlled expansion at ALL practical hunting distances.

All commonly used polymer tips in high BC bullets melt in flight.Hornady engineers discovered that commonly used bullet tip materials in streamlined high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets aerodynamic heating causes BC reduction and degradation of accuracy particularly at extended ranges 400 yds +. To counter this effect Hornady identified a heat resistant polymer and developed the Heat Shield tip. This revolutionary new tip creates the perfect meplat tip with exceptionally consistent results from bullet-to-bullet and lot-to-lot.

Features:

- Best-in-class BCs: Verified by Doppler radar the Heat Shield tip defies the effects of aerodynamic heating and retains its shape to maintain the highest in-class BC over its entire trajectory.
- Match accurate hunting bullet: Streamlined secant ogive with optimum boattail design + highly concentric AMP bullet jackets + Heat Shield tip combine for radically superior aerodynamic efficiency.
- Devastating conventional range performance: With high velocity 0-400 yard impact the bullet continually expands throughout its penetration path. The thick shank of the jacket and high Interlock ring keep the core and jacket together providing 50-60% weight retention.
- Best extended range terminal performance available: Upon low velocity 400+ yard impacts the Heat Shield tip drives backward into the bullet to initiate expansion. Exhibiting expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities. Available as component bullets or in factory loaded Precision Hunter ammunition.

Specifications:

- Bullets Only
- Caliber: 7mm .284
- Grain: 150
- Ballistic Coefficient G1: .574
- Ballistic Coefficient G7: .289
- Sectional Density: .266
- Quantity: 100/Box


  • 7mm Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$37.50
Hornady - 7mm/.284 Caliber (0.284" Diameter) Bullets - ELD Match, 180 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255285031)

ELD Match bullets are technologically advanced enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT tip point combined with numerous design features that deliver the highest-in-class ballistic coefficients superior accuracy and extreme consistency from bullet-to-bullet lot-to-lot.

Specifications:

- Bullets Only
- Caliber: 7mm
- Diameter: .284
- Grain: 180
- Sectional Density: .319
- Quantity: 100/Box


  • 7mm Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$34.92
Hornady - .30 Caliber (0.308" Diameter) Bullets - FTX, 135 Grains, Polymer Tip Flat Base, Per 100 (090255230277)

Hornady FTX bullets revolutionized lever-gun ballistics creating a whole new level of performance for these popular firearms. Lever-gun enthusiasts can now harness the accuracy power and long-range performance of a tipped bullet thats safe to load in tubular magazines.

The patented Flex Tip combined with Hornady pioneered secant ogive design creates an aerodynamic bullet with a thinner tapered front section and extended bearing surface for much higher ballistic coefficients. The FTX flies faster and flatter than traditional lever--gun bullets resulting in improved accuracy at ranges well beyond what was historically common.

The one-piece high antimony lead core of the FTX bullet is locked to the jacket with an InterLock ring resulting in reliable performance and deep penetration on large or heavy-bodied game animals. Designed to perform at muzzle velocities from 1600 to 2600 fps FTX bullets are ideal for hunters and shooters looking to give their lever gun new life.

Features:

- Patented Flex Tip Bullet Technology: Upon impact the soft tip compresses into the bullet initiated immediate expansion across a wide range of velocities. Safe to shoot in tubular magazines as well as any other firearm.
- InterLock Ring: Mechanically locks the core and jacket together for maximum weight retention and deep penetration.
- Ballistically Efficient Secant Ogive: Pioneered by Hornady the secant ogive profile delivers stability flat trajectories and amazing accuracy.
- Specially Engineered Jacket: The heavy jacket over the shank of the bullet combined with our proven InterLock design controls expansion and enhances accuracy.

Specificatins:

- Bullets Only
- Caliber: 30 Cal .308
- Grain: 135
- Flex Tip
- Ballistic Coefficient G1: .274
- Sectional Density: .203
- Quantity: 100/Box


  • 30 Caliber Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$28.00
Hornady - .30 Caliber (0.308" Diameter) Bullets - ELD Match, 155 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255303131)

ELD Match bullets are technologically advanced enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT tip point combined with numerous design features that deliver the highest-in-class ballistic coefficients superior accuracy and extreme consistency from bullet-to-bullet lot-to-lot.

Specifications:

- Bullets Only
- Caliber: 30 Caliber
- Diameter: .308
- Grain: 155
- Ballistic Coefficient G1: .461
- Ballistic Coefficient G7: .232
- Sectional Density: .233
- Quantity: 100/Box


  • 30 Caliber Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$34.92
Hornady - .30 Caliber (0.308" Diameter) Bullets - ELD Match, 225 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255309041)

ELD Match bullets are technologically advanced enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT tip point combined with numerous design features that deliver the highest-in-class ballistic coefficients superior accuracy and extreme consistency from bullet-to-bullet lot-to-lot.

Specifications:

- Bullets Only
- Caliber: 30 Caliber
- Diameter: .308
- Grain: 225
- Ballistic Coefficient G1: .777
- Ballistic Coefficient G7: .391
- Sectional Density: .339
- Quantity: 100/Box


  • 30 Caliber Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$40.66
Hornady - .41 Caliber (0.410" Diameter) Bullets - FTX, 190 Grains, Polymer Tip Flat Base (FB), Per 100 (090255410105)

Hornady has taken their Flex Tip Expanding bullet they use in their LEVERevolution and made it available in a projectile only. The patented Flex Tip bullet features an interlocking design that keeps the core of the bullet and the jacket together creating a deeper penetrating more humane kill. Not only that they offer controlled expansion enhanced accuracy and the delivery of flatter trajectories. These bullets are safe to use in all tubular magazines as well as any other firearm. This is not loaded ammunition.

Specifications:

Diameter: 0.41 Inches
Quantity: 100 Bullet
Grain Weight: 190 Grains
Bullet Style: Polymer Tip Flat Base
Lead Free: No
Ballistic Coefficient: 0.165
Cannelure: Yes
Bullet Coating: Non-Coated
Bullet Caliber: 41 Caliber
Sectional Density: 0.161


  • 41 Caliber Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$43.03
Nosler - Custom Reloading Brass - 33 Nosler, Per 25 (054041102223)

Nosler Custom Brass was developed to complement their line of custom bullets. Each lot is weight-sorted to provide consistent measurements and capacities for accurate loads and features a Nosler head-stamp. Before shipment Nosler chamfers and deburrs the case mouths and deburrs the flash hole. Fully prepped and ready to load upon receipt each piece of brass offers consistency in trimmed length and neck wall thickness.

Specifications:

- Caliber: 33 Nosler
- Finish: Brass
- Primed: No
- Quantity: 25 Rounds

Note: This brass is new and unprimed. This is not loaded ammunition


  • Custom Reloading Brass
  • Brand: Nosler


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$69.54
Sierra Bullets - 6mm/243 Caliber - MatchKing, 110 Grain s, Hollow Point Boat Tail, Per 100 (092763015759)

Shooters around the world will appreciate the accuracy and extreme long range performance of the 6mm 110 grain HPBT. A sleek 27 caliber elongated ogive and a final meplat reducing operation pointing provide an increased ballistic coefficient for optimal wind resistance and velocity retention. To ensure precise bullet to bore alignment a unique bearing surface to ogive junction uses the same 1.5 degree angle commonly found in many match rifle chamber throats

While they are recognized around the world for record-setting accuracy MatchKing and Tipped MatchKing bullets are not recommended for most hunting applications. Although MatchKing and Tipped MatchKing bullets are commonly used for varmint hunting their design will not provide the same reliable explosive expansion at equivalent velocities on varmints compared to their lightly jacketed Hornet Blitz or Varminter counterparts

Specifications:

- Caliber: 6mm
- Diameter: 0.243
- Weight: 110 grains
- Sectional Density: .266
- Ballistic Coefficients and Velocity Ranges: .617 @ 2600 fps and above
.605 @ between 1900 and 2600 fps
.580 @ 1900 fps and below
- Quantity: 100 bullets


  • 6mm/243 Caliber
  • Brand: Sierra Bullets


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$41.96
Sierra Bullets - 6mm/243 Caliber - MatchKing, 110 Grain s, Hollow Point Boat Tail, Per 500 (092763515754)

Shooters around the world will appreciate the accuracy and extreme long range performance of the 6mm 110 grain HPBT. A sleek 27 caliber elongated ogive and a final meplat reducing operation pointing provide an increased ballistic coefficient for optimal wind resistance and velocity retention. To ensure precise bullet to bore alignment a unique bearing surface to ogive junction uses the same 1.5 degree angle commonly found in many match rifle chamber throats

While they are recognized around the world for record-setting accuracy MatchKing and Tipped MatchKing bullets are not recommended for most hunting applications. Although MatchKing and Tipped MatchKing bullets are commonly used for varmint hunting their design will not provide the same reliable explosive expansion at equivalent velocities on varmints compared to their lightly jacketed Hornet Blitz or Varminter counterparts

Specifications:

- Caliber: 6mm
- Diameter: 0.243
- Weight: 110 grains
- Sectional Density: .266
- Ballistic Coefficients and Velocity Ranges: .617 @ 2600 fps and above
.605 @ between 1900 and 2600 fps
.580 @ 1900 fps and below
- Quantity: 500 bullets


  • 6mm/243 Caliber
  • Brand: Sierra Bullets


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$164.57
Sierra Bullets - 7mm/284 Caliber - MatchKing Bullets, 197 Grains, Hollow Point Boat Tail, Per 100 (092763019979)

Sierra MatchKing rifle bullets are super-accurate bullets with very thin jackets and are held to exacting tolerances in diameter and weight. Their accuracy has been acclaimed worldwide and they have been used to win more target competitions than all target bullets from other manufacturers combined. Weight retention is held to within +/- 0.3 grain. Each bullet is a hollow point and is designed with a very small meplat in order to achieve the highest ballistic coefficient possible. Specifications:

Specifications:

- Caliber: 7mm 284 Caliber
- Diameter: 0.284
- Weight: 197 Grains
- Style: Jacketed Hollow Point Boat Tail
- Coating: Non-Coated
- Lead Free: No
- Quantity: Per 100

Ballistic Information:

- Ballistic Coefficient: 0.78
- Sectional Density: 0.349
- Recommended Twist Rate: 1 in 7.5 or Faster

Note: This is not loaded ammunition


  • 7mm/284 Caliber
  • Brand: Sierra Bullets


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$42.74
Hornady - 6mm/.243 Caliber (0.243" Diameter) Bullets - ELD-X, 103 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255245509)

Conventional polymer tips in high BC bullets melt in flight. Hornady engineers discovered that conventional bullet tip materials in streamlined high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets aerodynamic heating causes BC reduction and degradation of accuracy particularly at extended ranges 400 yds +. To counter this effect Hornady identified a heat resistant polymer and developed the patent pending Heat Shield tip. This revolutionary new tip creates the perfect meplat tip with exceptionally consistent results from bullet-to-bullet and lot-to-lot.

The Heat Shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat tip that is always the same shape. A streamlined secant ogive with optimum boattail design plus the highly concentric AMP bullet jackets combined with the patent pending Heat Shield tip creates a supremely accurate high BC match bullet. ELD-Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions. With high velocity 0-400 yard impact the bullet continually expands throughout its penetration path. The thick shank of the jacket and high Interlock ring keep the core and jacket together providing 50-60% weight retention. Upon low velocity 400+ yard impacts the Heat Shield tip drives backward into the bullet to initiate expansion. Exhibiting conventional expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities. This is not loaded ammunition.

Features:

- Heat Shield Tip forms the perfect meplat
- No tip deformation from aerodynamic heating
- Match accurate hunting bullet
- Devastating terminal performance at all ranges

Specifications:

- Diameter: 0.243
- Quantity: 100 Bullet
- Grain Weight: 103 Grains
- Bullet Style: Polymer Tip Boat Tail
- Lead Free: No
- Ballistic Coefficient: 0.512
- Cannelure: No
- Bullet Coating: Non-Coated
- Bullet Caliber: 6mm 243 Caliber
- Sectional Density: 0.249


  • 6mm Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$37.50
Barnes Bullets - 7mm (284 Diameter) LRX Long-Range Hunting Bullets, 139gr, LRX Boat Tail, Per 50 - (716876128419)

The Barnes Long-Range X Bullet LRX line is designed after the best-selling Tipped Triple-Shock X Bullet. The LRX bullet design increases Ballistic Coefficient values by increasing ogive and boat tail lengths to improve the bullets long-range ballistic performance. For the hunter who is confident in long-range hunting the LRX will fill the niche of this new hunting craze. LRX bullets will continue to be manufactured with the proven 100-percent copper lead-free bodies. The bullets polymer tip initiates expansion causing the nose cavity to open instantly on contact doubling the bullets original diameter while creating four cutting petals that wreak extensive internal damage. Exceptional performance means clean quick kill. This is not loaded ammunition.

Specifications:

- Bullet Caliber: 7mm 284 Caliber
- Diameter: 0.284
- Grain Weight: 139 Grains
- Bullet Style: Polymer Tip Boat Tail
- Lead Free: Yes
- Cannelure: No
- Bullet Coating: Non-Coated
- Quantity: 50 Bullets

Ballistic Information:

- Ballistic Coefficient: 0.47
- Sectional Density: 0.246
- Bullet Length: 1.384


  • 7mm 284 Diameter LRX Long-Range Hunting Bullets 139gr LRX Boat Tail Per 50
  • Brand: Barnes Bullets


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$40.12
Barnes Bullets - 375 Caliber Bullets - LRX Long-Range Hunting Bullets, 270 Grains, LRX Boat Tail, Per 50 (716876237524)

The Barnes Long-Range X Bullet LRX line is designed after the best-selling Tipped Triple-Shock X Bullet. The LRX bullet design increases Ballistic Coefficient values by increasing ogive and boat tail lengths to improve the bullets long-range ballistic performance. For the hunter who is confident in long-range hunting the LRX will fill the niche of this new hunting craze. LRX bullets will continue to be manufactured with the proven 100-percent copper lead-free bodies. The bullets polymer tip initiates expansion causing the nose cavity to open instantly on contact doubling the bullets original diameter while creating four cutting petals that wreak extensive internal damage. Exceptional performance means clean quick kill. This is not loaded ammunition.

Specifications:

- Bullet Caliber: 375 Caliber
- Diameter: 0.375
- Grain Weight: 270 Grains
- Bullet Style: Polymer Tip Boat Tail
- Lead Free: Yes
- Cannelure: No
- Bullet Coating: Non-Coated
- Quantity: 50 Bullets

Ballistic Information:

- Ballistic Coefficient: 0.449
- Sectional Density: 0.274


  • 375 Caliber Bullets
  • Brand: Barnes Bullets


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$52.92
Barnes Bullets - 450 Bushmaster TSX Bullets, 275 Grains, Hollow Point Flat Base, Per 20 - (716876450275)

These revolutionary bullets from Barnes are made of 100% copper and contain no lead. When the bullet expands four razor-sharp cutting petals are created allowing the bullet to penetrate farther through tough bone and tissue. These bullets usually retain 100% of their original weight making them a superb choice for hunting. Barnes recommends initially seating bullets 0.050 off the lands. Best accuracy will be found from 0.030 to 0.070 depending on the rifle.

Specifications:

- Caliber: 450 Bushmaster
- Diameter: 0.451
- Grain Weight: 275 Grains
- Bullet Style: Hollow Point Flat Base
- Lead Free: Yes
- Cannelure: Yes
- Bullet Coating: Non-Coated
- Quantity: 20 Bullets

Ballistic Information:

- Ballistic Coefficient: 0.16
- Sectional Density: 0.14

Note: These are component bullets not loaded ammunition


  • 450 Bushmaster TSX Bullets 275 Grains Hollow Point Flat Base Per 20
  • Brand: Barnes Bullets


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$21.07
Hornady - .30 Caliber (0.308" Diameter) Bullets - ELD Match, 168 Grains, Polymer Tip Boat Tail (BT), Per 1900 (090255709278)

ELD Match Extremely Low Drag Match bullets are technologically advanced enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT tip point combined with numerous design features that deliver the highest-in-class ballistic coefficients superior accuracy and extreme consistency from bullet to bullet lot to lot.

Superior accuracy and industry leading ballistic design has been achieved with the ELD Match bullet. An optimum secant ogive and boattail design along with the Heat Shield tip produce a bullet with the highest possible ballistic coefficient in its class.

Features:

- Best-in-Class BCS: The Heat Shield tip is immune to the effects of aerodynamic heating and retains its shape to provide a perfect meplat tip that is always the same shape.
- Delivers The Highest Degree of Accuracy and Consistency: Streamlined secant ogive with optimum boattail design + highly concentric AMP bullet jackets + Heat Shield tip creates a supremely accurate high BC match bullet.
- Accurate Doppler Radar Verified BCS: ELD Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions.
- The Perfect Tip!: The Heat Shield tip creates the perfect meplat and outperforms BTHP bullets.

Specifications:

- Caliber: 30 Cal..308
- Sectional Density: .253
- Ballistic Coefficient: .523G1
.263G7
- Weight: 168 GR
- Application: Target/Match
- Box Count: 1900


  • 30 Caliber Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$630.26
Hornady - 6.5mm/.264 Caliber (0.264" Diameter) Bullets - ELD Match, 147 Grains, Polymer Tip Boat Tail (BT), Per 2000 (090255709247)

ELD Match Extremely Low Drag Match bullets are technologically advanced enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT tip point combined with numerous design features that deliver the highest-in-class ballistic coefficients superior accuracy and extreme consistency from bullet to bullet lot to lot.

Superior accuracy and industry leading ballistic design has been achieved with the ELD Match bullet. An optimum secant ogive and boattail design along with the Heat Shield tip produce a bullet with the highest possible ballistic coefficient in its class.

Features:

- Best-in-Class BCS: The Heat Shield tip is immune to the effects of aerodynamic heating and retains its shape to provide a perfect meplat tip that is always the same shape.
- Delivers The Highest Degree of Accuracy and Consistency: Streamlined secant ogive with optimum boattail design + highly concentric AMP bullet jackets + Heat Shield tip creates a supremely accurate high BC match bullet.
- Accurate Doppler Radar Verified BCS: ELD Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions.
- The Perfect Tip!: The Heat Shield tip creates the perfect meplat and outperforms BTHP bullets.

Specifications:

- Caliber: 6.5mm .264
- Sectional Density: .301
- Ballistic Coefficient: .697G1
.351G7
- Weight: 147 GR
- Application: Target/Match
- Box Count: 2000


  • 6.5mm Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$663.43
Hornady - .30 Caliber (0.308" Diameter) Bullets - ELD Match, 195 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255309515)

ELD Match Extremely Low Drag Match bullets are technologically advanced enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT tip point combined with numerous design features that deliver the highest-in-class ballistic coefficients superior accuracy and extreme consistency from bullet to bullet lot to lot.

Superior accuracy and industry leading ballistic design has been achieved with the ELD Match bullet. An optimum secant ogive and boattail design along with the Heat Shield tip produce a bullet with the highest possible ballistic coefficient in its class.

Features:

- Best-in-Class BCS: The Heat Shield tip is immune to the effects of aerodynamic heating and retains its shape to provide a perfect meplat tip that is always the same shape.
- Delivers The Highest Degree of Accuracy and Consistency: Streamlined secant ogive with optimum boattail design + highly concentric AMP bullet jackets + Heat Shield tip creates a supremely accurate high BC match bullet.
- Accurate Doppler Radar Verified BCS: ELD Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions.
- The Perfect Tip!: The Heat Shield tip creates the perfect meplat and outperforms BTHP bullets.

Specifications:

- Caliber: 30 Cal..308
- Sectional Density: .294
- Ballistic Coefficient: .584G1
.294G7
- Weight: 195 GR
- Application: Target/Match
- Box Count: 100


  • 30 Caliber Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$34.92
Hornady - .338 Caliber (0.338" Diameter) Bullets - ELD-X, 270 Grains, Polymer Tip Boat Tail (BT), Per 50 (090255333718)

The ELD-X Extremely Low Drag - eXpanding bullet is a technologically advanced match accurate ALL-RANGE hunting bullet featuring highest-in-class ballistic coefficients and consistent controlled expansion at ALL practical hunting distances.

Features:

- Best-in-Class BCS: Verified by Doppler radar the Heat Shield tip is immune to the effects of aerodynamic heating and retains its shape to maintain the highest-in-class BC over its entire trajectory.
- Match Accurate Hunting Bullet: Streamlined secant ogive with optimum boattail design + highly concentric AMP bullet jackets + Heat Shield tip combine for radically superior aerodynamic efficiency.
- Devastating Conventional Range Performance: With high velocity 0-400 yard impact the bullet continually expands throughout its penetration path. The thick shank of the jacket and high InterLock ring keep the core and jacket together providing 50-60% weight retention.
- Best Extended Range Terminal
- Performance Available: Upon low-velocity 400+ yard impacts the Heat Shield tip drives backward into the bullet to initiate expansion. Exhibiting conventional expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities.

Specifications:

- Caliber: 338 Cal..338
- Sectional Density: .338
- Ballistic Coefficient: .757G1
.381G7
- Weight: 270 GR
- Application: Medium Game 50-300 lbs.
Large Game 300-1500 lbs.
- Box Count: 50


  • 338 Caliber Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$41.96
Hornady - .25 Caliber (0.257" Diameter) Bullets - ELD-X, 110 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255254181)

The ELD-X Extremely Low Drag - eXpanding bullet is a technologically advanced match accurate ALL-RANGE hunting bullet featuring highest-in-class ballistic coefficients and consistent controlled expansion at ALL practical hunting distances.

Features:

- Best-in-Class BCS: Verified by Doppler radar the Heat Shield tip is immune to the effects of aerodynamic heating and retains its shape to maintain the highest-in-class BC over its entire trajectory.
- Match Accurate Hunting Bullet: Streamlined secant ogive with optimum boattail design + highly concentric AMP bullet jackets + Heat Shield tip combine for radically superior aerodynamic efficiency.
- Devastating Conventional Range Performance: With high velocity 0-400 yard impact the bullet continually expands throughout its penetration path. The thick shank of the jacket and high InterLock ring keep the core and jacket together providing 50-60% weight retention.
- Best Extended Range Terminal
- Performance Available: Upon low-velocity 400+ yard impacts the Heat Shield tip drives backward into the bullet to initiate expansion. Exhibiting conventional expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities.

Specifications:

- Caliber: 25 Cal..257
- Sectional Density: .238
- Ballistic Coefficient: .465G1
.234G7
- Weight: 110 GR
- Application: Medium Game 50-300 lbs.
- Box Count: 100


  • 25 Caliber Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$37.50
Hornady - 6mm/.243 Caliber (0.243" Diameter) Bullets - ELD Match, 108 Grains, Polymer Tip Boat Tail (BT), Per 2700 (090255709223)

ELD Match Extremely Low Drag Match bullets are technologically advanced enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT tip point combined with numerous design features that deliver the highest-in-class ballistic coefficients superior accuracy and extreme consistency from bullet to bullet lot to lot.

Superior accuracy and industry leading ballistic design has been achieved with the ELD Match bullet. An optimum secant ogive and boattail design along with the Heat Shield tip produce a bullet with the highest possible ballistic coefficient in its class.

Features:

- Best-in-Class BCS: The Heat Shield tip is immune to the effects of aerodynamic heating and retains its shape to provide a perfect meplat tip that is always the same shape.
- Delivers The Highest Degree of Accuracy and Consistency: Streamlined secant ogive with optimum boattail design + highly concentric AMP bullet jackets + Heat Shield tip creates a supremely accurate high BC match bullet.
- Accurate Doppler Radar Verified BCS: ELD Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions.
- The Perfect Tip!: The Heat Shield tip creates the perfect meplat and outperforms BTHP bullets.

Specifications:

- Caliber: 6mm.243
- Sectional Density: .261
- Ballistic Coefficient: .536G1
.270G7
- Weight: 108 GR
- Application: Target/Match
- Box Count: 2700


  • 6mm Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$895.63
Hornady - .22 Caliber (0.224" Diameter) Bullets - ELD Match, 75 Grains, Polymer Tip Boat Tail (BT), Per 3500 (090255709209)

ELD Match Extremely Low Drag Match bullets are technologically advanced enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT tip point combined with numerous design features that deliver the highest-in-class ballistic coefficients superior accuracy and extreme consistency from bullet to bullet lot to lot.

Superior accuracy and industry leading ballistic design has been achieved with the ELD Match bullet. An optimum secant ogive and boattail design along with the Heat Shield tip produce a bullet with the highest possible ballistic coefficient in its class.

Features:

- Best-in-Class BCS: The Heat Shield tip is immune to the effects of aerodynamic heating and retains its shape to provide a perfect meplat tip that is always the same shape.
- Delivers The Highest Degree of Accuracy and Consistency: Streamlined secant ogive with optimum boattail design + highly concentric AMP bullet jackets + Heat Shield tip creates a supremely accurate high BC match bullet.
- Accurate Doppler Radar Verified BCS: ELD Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions.
- The Perfect Tip!: The Heat Shield tip creates the perfect meplat and outperforms BTHP bullets.

Specifications:

- Caliber: 22 Cal..224
- Sectional Density: .214
- Ballistic Coefficient: .467G1
.235G7
- Weight: 75 GR
- Application: Target/Match
- Box Count: 3500


  • 22 Caliber Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$748.43
Hornady - .22 Caliber (0.224" Diameter) Bullets - 55 Grains, Full Metal Jacket Boat Tail (FMJ/BT) with Cannelure, Per 500 (090255226713)

Hornady Traditional and FMJ bullets are built with a rugged AMP bullet jacket Advanced Manufacturing Process that clearly delivers better performance. The thin-plated full metal jacket offered by other manufacturers is easily distorted and often breaks or separates when the bullet impacts the target.

The Hornady AMP bullet jacket features virtually zero tolerance for concentricity and near-zero wall thickness variation punching through targets without deforming or breaking.

Features:

- Rugged AMP Bullet Jacket: Hornady Traditional and FMJ bullets are built with a rugged AMP bullet jacket Advanced Manufacturing Process that clearly delivers better performance.
- Superior Design: The thin-plated full metal jacket offered by other manufacturers is easily distorted and often breaks or separates when the bullet impacts the target.
- Virtually Zero Variation: The Hornady AMP bullet jacket features virtually zero tolerance for concentricity and near-zero wall thickness variation punching through targets without deforming or breaking.

Specifications:

- Caliber: 22 Cal..224 FMJ-BT W/C
- Sectional Density: .157
- Ballistic Coefficient: 0243G1
- Weight: 55 GR
- Box Count: 500
- Application: Varmintless than 50 lbs
Target/Match


  • 22 Caliber Bullets
  • Brand: Hornady


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
$52.53
Hornady - .30 Caliber (0.308" Diameter) Bullets - ELD-X, 178 Grains, Polymer Tip Boat Tail (BT), Per 100 (090255230741)

conventional polymer tips in high bc bullets melt in flight. hornady engineers discovered that conventional bullet tip materials in streamlined high bc bullets melt and deform. although not a significant issue affecting moderate bc conventional tipped varmint and hunting bullets aerodynamic heating causes bc reduction and degradation of accuracy particularly at extended ranges 400 yds +. to counter this effect hornady identified a heat resistant polymer and developed the patent pending heat shield tip. this revolutionary new tip creates the perfect meplat tip with exceptionally consistent results from bullet-to-bullet and lot-to-lot.

the heat shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat tip that is always the same shape. a streamlined secant ogive with optimum boattail design plus the highly concentric amp bullet jackets combined with the patent pending heat shield tip creates a supremely accurate high bc match bullet. eld-match bullet bcs are measured with doppler radar and corrected to standard atmospheric conditions. with high velocity 0-400 yard impact the bullet continually expands throughout its penetration path.

the thick shank of the jacket and high interlock ring keep the core and jacket together providing 50-60% weight retention. upon low velocity 400+ yard impacts the heat shield tip drives backward into the bullet to initiate expansion. exhibiting conventional expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities. this is not loaded ammunition.

features:

- heat shield tip forms the perfect meplat
- no tip deformation from aerodynamic heating
- match accurate hunting bullet
- devastating terminal performance at all ranges

specifications:

- caliber: 30
- bullet diameter: 0.308
- bullet weight: 178 grains
- bullet style: polymer tipped boat tail
- bullet coating: non-coated
- quantity: 100 bullets

ballistics information:

- sectional density: 0.268
- g1 ballistic coefficient: 0.535
- g7 ballistic coefficient: 0.271

note: these are component bullets not loaded ammunition


  • 30 caliber bullets

Thank you for shopping at Survivorsparadise.com!


$37.50
Per Page      1 - 50 of 67