Stocks & Barrels

Sort By:  
CMMG, Inc - Barrel Sub-Assembly - 16.10? M4 4140CM SBN, 9mm (815835014098)

perfect for building your custom 9mm ar15 upper group

features:

- m4 profile
- 4140 chrome moly
- salt bath nitride finish inside and out
- .750? carbine length journal

specifications:

- caliber: 9x19mm nato
- barrel length: 16.10?
- rate of twist: 1:10
- threaded: 1/2-36


  • barrel sub-assembly 16.10? m4 4140cm sbn 9mm

Thank you for shopping at Survivorsparadise.com!


$180.68
T/C Accessories - Barrel, G2 Contender 14" Blued 6.8 Remington - (090161026926)

this is a factory thompson center contender and g2 contender barrel. barrels for the contender and g2 contender are interchangeable but not for use with encore frames. they can be changed in seconds by removing the forend and tapping out the barrel/frame hinge pin. drilled and tapped for scope mounts. no gunsmithing required. this barrel will not work on contender frames with a serial number pre 195000 unless the grips have been changed to the new g2 style.

specifications:

- model: g2 contender
- caliber: 6.8mm remington spc
- barrel length: 14
- twist: 1 in 10
- sights: adjustable
- finish: blue


  • barrel g2 contender 14 blued 6.8 remington

Thank you for shopping at Survivorsparadise.com!


$291.46
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 16" Barrel, M4 Carbine Chrome Phs (815604010702)

cold hammer forging of barrels has been known for decades to produce the most accurate longest lasting rifle barrels obtainable. the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process creates a defect free bore and the most consistent chamber possible.

all daniel defense cold hammer forged barrels are made from start to finish in a state-of-the-art facility located in black creek ga. in keeping with the heritage of not cutting corners all cold hammer forged barrels feature a forged chamber and heavy phosphate exterior coating or salt bath nitride finish. these barrels will prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.

specifications:

- caliber: 5.56mm nato
- barrel length: 16
- manufacture process: cold hammer forged
- twist rate: 1:7
- muzzle thread per inch: 1/2 28 tpi
- material: chrome moly vanadium
- outside finish: mil-spec heavy phosphate
- inside finish: chrome
- gas system: carbine length
- diameter at gas port: .750?
- barrel extension: a4
- profile: m4
- weight: 1.75 lb.


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


$274.15
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 14.5" Barrel, M4 Carbine (852548002363)

cold hammer forging of barrels has been known for decades to produce the most accurate longest lasting rifle barrels obtainable. the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process creates a defect free bore and the most consistent chamber possible.

all daniel defense cold hammer forged barrels are made from start to finish in a state-of-the-art facility located in black creek ga. in keeping with the heritage of not cutting corners all cold hammer forged barrels feature a forged chamber and heavy phosphate exterior coating or salt bath nitride finish. these barrels will prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.

specifications:

- caliber: 5.56x45mm nato
- length: 14.5
- material: 4150 chrome moly vanadium cold hammer forged
- contour: m4
- twist rate: 1 in 7
- chrome lined: yes
- finish: mil-spec heavy phosphate
- m4 feed ramps: yes
- muzzle thread pattern: 1/2-28
- gas port location: carbine
- exterior diameter at gas port: 0.750


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


$274.15
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 16" Government Mid (852548002462)

cold hammer forging of barrels has been known for decades to produce the most accurate longest lasting rifle barrels obtainable. the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process creates a defect free bore and the most consistent chamber possible.

all daniel defense cold hammer forged barrels are made from start to finish in a state-of-the-art facility located in black creek ga. in keeping with the heritage of not cutting corners all cold hammer forged barrels feature a forged chamber and heavy phosphate exterior coating. they are all mp tested on-site and are available in multiple configurations which includes barrel only stripped; barrel with front sight base; and barrel with low profile gas block. these barrels will prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.

specifications:

- color: black
- caliber: 5.56mm nato
- barrel length: 16
- manufacture process: cold hammer forged
- twist rate: 1:7
- muzzle thread: 1/228 tpi threads per inch
- material: chrome moly vanadium
- outside finish: mil-spec heavy phosphate
- inside finish: chrome
- gas system: mid-length
- diameter at gas port: .750?
- barrel extension: a4
- profile: government
- weight: 1.7 lb.


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


$274.15
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 10.3" Government Carbine (852548002301)

all daniel defense cold hammer forged ar-15 barrels are constructed of mil-spec 4150 chrome moly vanadium steel that is hydraulically shaped by carbide steel hammers around a precision machined mandrel to form the chamber lands and grooves. this hammer forging process creates a defect-free bore with the most consistent chamber possible and each of daniel defenses barrels undergoes a magnetic particle inspection mpi test to ensure this standard of perfection is achieved. all stripped barrels come equipped with an a4 barrel extension with extended m4 feed ramps for enhanced feeding reliability and a pre-installed locator pin.

this ar-15 pistol barrel features a government profile that is slim under the handguard and heavy forward of the gas block and a chrome lined chamber and bore for enhanced wear and corrosion resistance. its 5.56x45mm nato chamber is fully compatible and safe for use with both surplus mil-spec and commercial ammunition while its 1 in 7 rifling twist rate is ideal for use with medium to heavy weight projectiles of up to about 77 grains.

specifications:

- chamber: 5.56x45mm nato
- contour: government
- material: 4150 chrome moly vanadium cold hammer forged
- twist rate: 1 in 7
- chrome lined: yes
- finish: mil-spec heavy phosphate
- m4 feed ramps: yes
- muzzle thread pattern: 1/2-28
- exterior diameter at gas port: 0.750
- weight: 1.15 lb.


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$274.15
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 11.5" Government Carbine (852548002325)

the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process creates a defect free bore and the most consistent chamber possible.

all cold hammer forged barrels feature a forged chamber and heavy phosphate exterior coating. they are all mp tested on-site and are available in multiple configurations which includes barrel only stripped; barrel with front sight base; and barrel with low profile gas block. these barrels will prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.

nfa disclaimer
- once this part is assembled into a complete firearm it becomes a regulated item by the national firearms act nfa. please check with your local and state municipalities for any further regulatory requirements. it is the buyers responsibility to make sure they comply with all nfa rules and applicable laws.

specifications:

- caliber: 5.56mm nato
- barrel length: 11.5
- manufacture process: cold hammer forged
- twist rate: 1:7
- muzzle thread: 1/2x28 tpi threads per inch
- material: chrome moly vanadium
- outside finish: mil-spec heavy phosphate
- inside finish: chrome
- gas system: carbine length
- diameter at gas port: .750
- barrel extension: a4
- profile: government
- weight: 1.28 lb.


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$274.15
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 12.5" Government Carbine (852548002349)

the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process creates a defect free bore and the most consistent chamber possible.

all cold hammer forged barrels feature a forged chamber and heavy phosphate exterior coating. they are all mp tested on-site and are available in multiple configurations which includes barrel only stripped; barrel with front sight base; and barrel with low profile gas block. these barrels will prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.

nfa disclaimer
- once this part is assembled into a complete firearm it becomes a regulated item by the national firearms act nfa. please check with your local and state municipalities for any further regulatory requirements. it is the buyers responsibility to make sure they comply with all nfa rules and applicable laws.

specifications:

- caliber: 5.56mm nato
- barrel length: 12.5
- manufacture process: cold hammer forged
- twist rate: 1:7
- muzzle thread: 1/2x28 tpi threads per inch
- material: chrome moly vanadium
- outside finish: mil-spec heavy phosphate
- inside finish: chrome
- gas system: carbine length
- diameter at gas port: .750
- barrel extension: a4
- profile: government
- weight: 1.4 lb.


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


$274.15
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 14.5" Government Mid (852548002448)

the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process creates a defect free bore and the most consistent chamber possible.

all cold hammer forged barrels feature a forged chamber and heavy phosphate exterior coating. they are all mp tested on-site and are available in multiple configurations which includes barrel only stripped; barrel with front sight base; and barrel with low profile gas block. these barrels will prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.

nfa disclaimer
- once this part is assembled into a complete firearm it becomes a regulated item by the national firearms act nfa. please check with your local and state municipalities for any further regulatory requirements. it is the buyers responsibility to make sure they comply with all nfa rules and applicable laws.

specifications:

- caliber: 5.56mm nato
- barrel length: 14.5
- manufacture process: cold hammer forged
- twist rate: 1:7
- muzzle thread: 1/2x28 tpi threads per inch
- material: chrome moly vanadium
- outside finish: mil-spec heavy phosphate
- inside finish: chrome
- gas system: mid-length
- diameter at gas port: .750
- barrel extension: a4
- profile: government
- weightl 1.5 lb.


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$274.15
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 14.5" LW Mid (815604010221)

the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process creates a defect free bore and the most consistent chamber possible.

all cold hammer forged barrels feature a forged chamber and heavy phosphate exterior coating. they are all mp tested on-site and are available in multiple configurations which includes barrel only stripped; barrel with front sight base; and barrel with low profile gas block. these barrels will prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.

nfa disclaimer
- once this part is assembled into a complete firearm it becomes a regulated item by the national firearms act nfa. please check with your local and state municipalities for any further regulatory requirements. it is the buyers responsibility to make sure they comply with all nfa rules and applicable laws.

specifications:

- caliber: 5.56mm nato
- barrel length: 14.5
- manufacture process: cold hammer forged
- twist rate: 1:7
- muzzle thread: 1/2x28 tpi threads per inch
- material: chrome moly vanadium
- outside finish: mil-spec heavy phosphate
- inside finish: chrome
- gas system: mid-length
- diameter at gas port: .750
- barrel extension: a4
- profile: lightweight
- weight: 1.38 lbs.
- manufacturer: daniel defense


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


$274.15
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 16" LW Mid (815604010108)

the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process creates a defect free bore and the most consistent chamber possible.

all cold hammer forged barrels feature a forged chamber and heavy phosphate exterior coating. they are all mp tested on-site and are available in multiple configurations which includes barrel only stripped; barrel with front sight base; and barrel with low profile gas block. these barrels will prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.

nfa disclaimer
- once this part is assembled into a complete firearm it becomes a regulated item by the national firearms act nfa. please check with your local and state municipalities for any further regulatory requirements. it is the buyers responsibility to make sure they comply with all nfa rules and applicable laws.

specifications:

- caliber: 5.56mm nato
- barrel length: no
- manufacture process: cold hammer forged
- twist rate: 1:7
- muzzle thread: 1/2x28 tpi threads per inch
- material: chrome moly vanadium
- outside finish: mil-spec heavy phosphate
- inside finish: chrome
- gas system: mid-length
- diameter at gas port: .750
- barrel extension: a4
- profile: lightweight
- weight: 1.35 lb.
- manufacturer: daniel defense


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


$274.15
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 14.50" Barrel, M4 Carbine with FSB (852548002370)

cold hammer forging chf of barrels has been known for decades to produce the most accurate longest lasting rifle barrels obtainable. the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during
the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process changes the micro- structure of the steel making it stronger with a defect-free bore and the most consistent chamber possible.

what started for daniel defense as a barrel project has quickly proven to be an industry changer. unable to locate a supplier of cold hammer forged barrels for our own rifles we purchased a hammer forge capable of supporting our needs. in early 2009 after months of research and
development and labor intensive testing daniel defense introduced one of the only commercially available 5.56 cold hammer forge barrels in the united states. after fine-tuning the manufacturing process and proving these barrels to be some of the most accurate and durable currently available.

specifications:

- caliber: 5.56x45mm nato
- barrel length: 14 1/2 m4 carbine gas with fsb
- rate of twist: 1:7


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$278.01
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 14.50" Barrel, M4 Carbine with LPG (815604011884)

cold hammer forging chf of barrels has been known for decades to produce the most accurate longest lasting rifle barrels obtainable. the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during
the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process changes the micro- structure of the steel making it stronger with a defect-free bore and the most consistent chamber possible.

what started for daniel defense as a barrel project has quickly proven to be an industry changer. unable to locate a supplier of cold hammer forged barrels for our own rifles we purchased a hammer forge capable of supporting our needs. in early 2009 after months of research and
development and labor intensive testing daniel defense introduced one of the only commercially available 5.56 cold hammer forge barrels in the united states. after fine-tuning the manufacturing process and proving these barrels to be some of the most accurate and durable currently available.


specifications:

- caliber: 5.56x45mm nato
- barrel length: 14 1/2 m4 profile carbine gas with lpg
- rate of twist: 1:7


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


$327.55
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 16" Barrel, M4 Carbine with FSB (852548002394)

cold hammer forging chf of barrels has been known for decades to produce the most accurate longest lasting rifle barrels obtainable. the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during
the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process changes the micro- structure of the steel making it stronger with a defect-free bore and the most consistent chamber possible.

what started for daniel defense as a barrel project has quickly proven to be an industry changer. unable to locate a supplier of cold hammer forged barrels for our own rifles we purchased a hammer forge capable of supporting our needs. in early 2009 after months of research and
development and labor intensive testing daniel defense introduced one of the only commercially available 5.56 cold hammer forge barrels in the united states. after fine-tuning the manufacturing process and proving these barrels to be some of the most accurate and durable currently available.

specifications:

- caliber: 5.56x45mm nato
- barrel length: 16 m4 profile carbine gas with fsb
- rate of twist: 1:7


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


$250.57
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 16" M4, Carbine with LPG (815604011693)

cold hammer forging chf of barrels has been known for decades to produce the most accurate longest lasting rifle barrels obtainable. the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during
the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process changes the micro- structure of the steel making it stronger with a defect-free bore and the most consistent chamber possible. what started for daniel defense as a barrel project has quickly proven to be an industry changer. unable to locate a supplier of cold hammer forged barrels for our own rifles we purchased a hammer forge capable of supporting our needs.

in early 2009 after months of research and development and labor intensive testing daniel defense introduced one of the only commercially available 5.56 cold hammer forge barrels in the united states. after fine-tuning the manufacturing process and proving these barrels to be some of the most accurate and durable currently available daniel defense introduced an entire line of cold hammer forged barrels. sophisticated equipment such as the hommel optic micro-vu and bore scope are used routinely for complex measurements ensuring each barrel is to spec. daniel defense barrels are finished with both a heavy phosphate exterior coating and chrome lined or finished with a salt bath nitride known

specifications:

- caliber: 5.56x45mm nato
- barrel length: 16 m4 profile carbine gas with lpg
- rate of twist: 1:7


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


$265.00
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 16" Barrel, Government, MID with FSB (852548002479)

cold hammer forging chf of barrels has been known for decades to produce the most accurate longest lasting rifle barrels obtainable. the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during
the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process changes the micro- structure of the steel making it stronger with a defect-free bore and the most consistent chamber possible.

what started for daniel defense as a barrel project has quickly proven to be an industry changer. unable to locate a supplier of cold hammer forged barrels for our own rifles we purchased a hammer forge capable of supporting our needs. in early 2009 after months of research and
development and labor intensive testing daniel defense introduced one of the only commercially available 5.56 cold hammer forge barrels in the united states. after fine-tuning the manufacturing process and proving these barrels to be some of the most accurate and durable currently available daniel defense introduced an entire line of cold hammer forged barrels.

daniel defense barrels are finished with both a heavy phosphate exterior coating and chrome lined or finished with a salt bath nitride known for superior protection against corrosion while preserving the maximum accuracy possible.

specifications:

- caliber: 5.56x45 nato
- barrel length: 16 government profile mid length gas with fsb


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$309.77
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 10.30" Barrel, Government, Carbine with FSB (852548002318)

cold hammer forging chf of barrels has been known for decades to produce the most accurate longest lasting rifle barrels obtainable. the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during
the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process changes the micro- structure of the steel making it stronger with a defect-free bore and the most consistent chamber possible.

what started for daniel defense as a barrel project has quickly proven to be an industry changer. unable to locate a supplier of cold hammer forged barrels for our own rifles we purchased a hammer forge capable of supporting our needs. in early 2009 after months of research and
development and labor intensive testing daniel defense introduced one of the only commercially available 5.56 cold hammer forge barrels in the united states. after fine-tuning the manufacturing process and proving these barrels to be some of the most accurate and durable currently available

sophisticated equipment such as the hommel optic micro-vu and bore scope are used routinely for complex measurements ensuring each barrel is to spec. daniel defense barrels are finished with both a heavy phosphate exterior coating and chrome lined or finished with a salt bath nitride known for superior protection against corrosion while preserving the maximum accuracy possible.

specifications:

- caliber: 5.56x45mm nato
- barrel length: 10.30 government profile carbine gas with fsb
- rate of twist: 1:7


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$291.97
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 10.30" Barrel, Government, Carbine with LPG (815604011839)

daniel defense is an industry leading manufacturer of ar-15 styled firearms and tactical weapons accessories. dd is intensely focused on providing top quality small arms solutions to our military and law enforcement community with innovative engineering and a state of the art manufacturing facility. whether you are dropping into harms way deep behind enemy lines serving and protecting your local community or defending your family trust daniel defense!

includes:

- low profile gas block

features:

- cold hammer forged barrel
- government profile
- carbine length gas system
- mil-spec heavy phosphate finish

specifications:

- 5.56mm nato accepts .223 remington
- 10.3 chrome moly vanadium
- 1:7 twist
- 0.750 diameter at the gas seat
- threaded 1/2x28
- weight: 1.15 lbs.
- color: matte black


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


$327.55
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 16" Barrel, Government, MID with LPG (815604011945)

cold hammer forging chf of barrels has been known for decades to produce the most accurate longest lasting rifle barrels obtainable. the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during
the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process changes the micro- structure of the steel making it stronger with a defect-free bore and the most consistent chamber possible.

what started for daniel defense as a barrel project has quickly proven to be an industry changer. unable to locate a supplier of cold hammer forged barrels for our own rifles we purchased a hammer forge capable of supporting our needs. in early 2009 after months of research and
development and labor intensive testing daniel defense introduced one of the only commercially available 5.56 cold hammer forge barrels in the united states. after fine-tuning the manufacturing process and proving these barrels to be some of the most accurate and durable currently available daniel defense introduced an entire line of cold hammer forged barrels.

daniel defense barrels are finished with both a heavy phosphate exterior coating and chrome lined or finished with a salt bath nitride known for superior protection against corrosion while preserving the maximum accuracy possible.

specifications:

- caliber: 5.56x45 nato
- barrel length: 16 government profile mid length gas with lpg


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


$327.55
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 11 1/2" Barrel, Government, Carbine with LPG (815604011846)

cold hammer forging chf of barrels has been known for decades to produce the most accurate longest lasting rifle barrels obtainable. the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during
the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process changes the micro- structure of the steel making it stronger with a defect-free bore and the most consistent chamber possible. what started for daniel defense as a barrel project has quickly proven to be an industry changer. unable to locate a supplier of cold hammer forged barrels for our own rifles we purchased a hammer forge capable of supporting our needs.

in early 2009 after months of research and development and labor intensive testing daniel defense introduced one of the only commercially available 5.56 cold hammer forge barrels in the united states. after fine-tuning the manufacturing process and proving these barrels to be some of the most accurate and durable currently available daniel defense introduced an entire line of cold hammer forged barrels. sophisticated equipment such as the hommel optic micro-vu and bore scope are used routinely for complex measurements ensuring each barrel is to spec. daniel defense barrels are finished with both a heavy phosphate exterior coating and chrome lined or finished with a salt bath nitride known

specifications:

- caliber: 5.56x45mm nato
- barrel length: 11 government carbine with lpg
- rate of twist: 1:7


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


$327.55
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 12 1/2" Government, Carbine with FSB (852548002356)

cold hammer forging chf of barrels has been known for decades to produce the most accurate longest lasting rifle barrels obtainable. the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during
the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process changes the micro- structure of the steel making it stronger with a defect-free bore and the most consistent chamber possible. what started for daniel defense as a barrel project has quickly proven to be an industry changer. unable to locate a supplier of cold hammer forged barrels for our own rifles we purchased a hammer forge capable of supporting our needs.

in early 2009 after months of research and development and labor intensive testing daniel defense introduced one of the only commercially available 5.56 cold hammer forge barrels in the united states. after fine-tuning the manufacturing process and proving these barrels to be some of the most accurate and durable currently available daniel defense introduced an entire line of cold hammer forged barrels. sophisticated equipment such as the hommel optic micro-vu and bore scope are used routinely for complex measurements ensuring each barrel is to spec. daniel defense barrels are finished with both a heavy phosphate exterior coating and chrome lined or finished with a salt bath nitride known

specifications:

- caliber: 5.56x45mm nato
- barrel length: 12 1/2 government carbine with fsb
- rate of twist: 1:7


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


$250.57
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 14 1/2” Lightweight Profile, Carbine Gas with LPG (815604011891)

cold hammer forging chf of barrels has been known for decades to produce the most accurate longest lasting rifle barrels obtainable. the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during
the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process changes the micro- structure of the steel making it stronger with a defect-free bore and the most consistent chamber possible.

what started for daniel defense as a barrel project has quickly proven to be an industry changer. unable to locate a supplier of cold hammer forged barrels for our own rifles we purchased a hammer forge capable of supporting our needs. in early 2009 after months of research and
development and labor intensive testing daniel defense introduced one of the only commercially available 5.56 cold hammer forge barrels in the united states. after fine-tuning the manufacturing process and proving these barrels to be some of the most accurate and durable currently available daniel defense introduced an entire line of cold hammer forged barrels.

daniel defense barrels are finished with both a heavy phosphate exterior coating and chrome lined
or finished with a salt bath nitride known for superior protection against corrosion while preserving
the maximum accuracy possible.

specifications:

- caliber: 5.56x45 nato
- barrel length: 14 1/2 lightweight profile carbine gas with lpg
- rate of twist: 1:7


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


$219.94
Daniel Defense - Barrel Assembly CMV CHF 5.56/1:7 - 16" Lightweight, Mid Length with LPG (815604011952)

cold hammer forging chf of barrels has been known for decades to produce the most accurate longest lasting rifle barrels obtainable. the cold hammer forging of barrels is accomplished through intense hydraulic pressure applied at opposing angles by carbide steel hammers. during
the hammering process a mandrel is inserted into the bore while the carbide steel hammers shape the barrel around the mandrel creating the chamber the lands and the grooves. in addition to the aforementioned benefits the cold hammer forging process changes the micro- structure of the steel making it stronger with a defect-free bore and the most consistent chamber possible. what started for daniel defense as a barrel project has quickly proven to be an industry changer. unable to locate a supplier of cold hammer forged barrels for our own rifles we purchased a hammer forge capable of supporting our needs.

in early 2009 after months of research and development and labor intensive testing daniel defense introduced one of the only commercially available 5.56 cold hammer forge barrels in the united states. after fine-tuning the manufacturing process and proving these barrels to be some of the most accurate and durable currently available daniel defense introduced an entire line of cold hammer forged barrels. sophisticated equipment such as the hommel optic micro-vu and bore scope are used routinely for complex measurements ensuring each barrel is to spec. daniel defense barrels are finished with both a heavy phosphate exterior coating and chrome lined or finished with a salt bath nitride known

specifications:

- caliber: 5.56x45mm nato
- barrel length: 16 lightweight profile mid-length gas with lpg
- rate of twist: 1:7


  • barrel assembly cmv chf 5.56/1:7

Thank you for shopping at Survivorsparadise.com!


$265.00
Heckler & Koch - Tactical Threaded Barrel - USP40 4.90" (642230254480)

this is an original factory replacement part from h&k. factory replacement parts are manufactured to the exact same specifications and tolerances and use the same manufacturing materials as the original parts.

features:

- 14.5 x 1 mm left hand thread
- threaded barrel replacement for the standard 4.25 non-threaded barrel
- disassembly and assembly may be required and some parts may require installation by a qualified gunsmith

specifications:

- caliber: .40 smith & wesson
- barrel length: 4.90
- finish: blued


  • tactical threaded barrel

Thank you for shopping at Survivorsparadise.com!


$254.63
Tactical Solutions - Brrl Ruger 10/22 22 Long Rifle .920" Dia 1/16 twist 16.5" fluted Al. ThrdMzl ODG - (856365001103)

machined from 6061-t6 aluminum the x-ring barrel has been designed to make your ruger 10/22 rifle lighter and significantly more accurate. the x-ring barrel fits all ruger 10/22 receivers and most aftermarket 10/22 style receivers. accuracy is enhanced by a rifled chromoly steel liner with a polished 11 degree crown. optional threads allow easy addition of a tacsol suppressor or compensator. with plenty of color options you will have no issues finding a barrel to match your custom rifle.

specifications:

- length: 16 1/2
- threads: 1/2x28
- rate of twist: 1:16
- weight: 15 oz
green- color: matte olive drab

note: x-ring barrels are compatible with the ruger sr-22 rifle.


  • barrel ruger 10/22 22 long rifle

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$219.30
Tactical Solutions - Tail-Lite Threaded Barrel - 5 1/2", Matte Black, Flutes (879971000155)

to all buck mark owners: are you tired of your friends rubbing
their tacsol pac-lite upgrades in your face? stop your envy
and install a trail-lite barrel on your browning buck mark
pistol. with many of the same great features as our pac-lite barrels
the trail-lite offers buck mark lovers improved balance
accuracy and a lighter weight. as with all tactical solutions products
put the hack saw away. installation of the trail-lite barrel
on your existing buck mark frame is quick and easy and requires
no gunsmithing.

specifications:

- length: 5 1/2 threaded fluted
- threads: 1/2x28
- rate of twist: 1-16
- weight: 6oz
- finish: matte black


  • trail-lite 5 1/2 threaded barrel

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$230.37
American Tactical - Match Grade Drop-In Barrel - Glock 19, 9mm, Non-Threaded (813393019517)

american tactical match grade drop in barrel for glock 19

features:

- precision engineered cnc cut 416 r stainless steel
- broach cut and finished honed
- drop-in fit no gunsmithing required
- billet thread protector included
- compatible with lead bullets
- match grade accuracy

specifications:

- caliber: 9mm
- threads: 1/2x28
- rate of twist: 1:10 right hand


  • match grade drop-in barrel

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$106.18
FN - FNX-45T Barrel 5.3", Black - (845737005856)

fnx-45 threaded barrel with thread protector black. replace your worn factory part or keep one as a backup. fn america factory parts are made with the same quality in materials and workmanship that you have come to expect and trust from fn america.

- caliber: .45 acp
- length: 5.3
- thread: .578x28 rh
- twist: 1:16 rh


  • fnx-45t barrel

Thank you for shopping at Survivorsparadise.com!


$202.54
FN - FNS/FNX-9 - 4" Barrel, Stainless Steel (845737005900)

fnh fns / fnx-9 4 barrel stainless. replace your worn factory part or keep one as a backup. fnh factory parts are made with the same quality in materials and workmanship that you have come to expect and trust from fnh.

specifications:

length: 4
finish: stainless steel


  • fns/fnx-9 barrel

Thank you for shopping at Survivorsparadise.com!


$115.67
FN - FNS/FNX-40 - 4" Barrel, Black (845737005931)

fnh fns / fnx-40 4 barrel black. this part is a fnh factory oem part. made to the same factory specifications materials and standards as the parts currently in your fnh firearm. feel secure in knowing the part you order will be the same as the worn or missing part from your fnh firearm.


  • fns/fnx-40 barrel

Thank you for shopping at Survivorsparadise.com!


$94.99
Tactical Solutions - Tail-Lite Threaded Barrel - 5 1/2", Gun Metal Gray, No Flutes (879971005976)

to all buck mark owners: are you tired of your friends rubbing their tacsol pac-lite upgrades in your face? stop your envy and install a trail-lite barrel on your browning buck mark pistol. with many of the same great features as our pac-lite barrels the trail-lite offers buck mark lovers improved balance accuracy and a lighter weight. as with all tactical solutions products put the hack saw away. installation of the trail-lite barrel on your existing buck mark frame is quick and easy and requires no gunsmithing.

specifications:

- no flutes
- finish: gun metal gray
- twist: 1-16
- threads: 1/2x28
- weight: 6 oz.


  • 5 1/2 trail lite barrel gun metal gray

Thank you for shopping at Survivorsparadise.com!


$217.47
Tactical Solutions - Tail-Lite Threaded Barrel - 5 1/2", Gun Metal Gray, Flutes (879971005099)

to all buck mark owners: are you tired of your friends rubbing their tacsol pac-lite upgrades in your face? stop your envy and install a trail-lite barrel on your browning buck mark pistol. with many of the same great features as our pac-lite barrels the trail-lite offers buck mark lovers improved balance accuracy and a lighter weight. as with all tactical solutions products put the hack saw away. installation of the trail-lite barrel on your existing buck mark frame is quick and easy and requires no gunsmithing.

specifications:

- fluted
- finish: gun metal gray
- twist: 1-16
- threads: 1/2x28
- weight: 6 oz.


  • trail-lite barrel 5 1/2 fluted gun metal gray

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$230.37
American Tactical - Match Grade Drop-In Barrel - Glock 35 (813393019883)

drop-in fit for glock model 35 is non-threaded and broach cut and precision finish honed. drop-in requires no gunsmithing. compatiable with lead bullets and match grade accuracy.

specifications:

- material: 416r stainless steel
- fits: glock 35/.40 s&w


  • match grade drop-in barrel

Thank you for shopping at Survivorsparadise.com!


$125.34
Mossberg - 835 Barrel - 12 Gauge, 28" Barrel, Bead Sights, Mossy Oak Break-Up Country (015813908078)

This 835 shotgun barrel features a bead sight and a mossy oak break-up country style finish.

Specifications:

- Model: 835 Ulti-Mag
- Gauge: 12 Gauge
- Length: 28
- Sights: Bead
- Finish: Mossy Oak Break-Up Country
- Type: All Purpose
- Chokes Included: Accu-Mag Set
- Barrel Features: Vent Rib
- Purpose: Customization


  • 835 Barrel
  • Brand: Mossberg


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$216.64
Mossberg - 835 Barrel - 12 Gauge, 28" Barrel, Bead Sights, Mossy Oak Obsession (015813908085)

This 835 shotgun barrel features a bead sight and a mossy oak obsession style finish.

Specifications:

- Model: 835 Ulti-Mag
- Gauge: 12 Gauge
- Length: 28
- Sights: Bead
- Finish: Mossy Oak Obsession
- Type: All Purpose
- Chokes Included: Accu-Mag Set
- Barrel Features: Vent Rib
- Purpose: Customization


  • 835 Barrel
  • Brand: Mossberg


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$216.64
Mossberg - 500 Barrel - 20 Gauge, 26", Field, Vent Rib (015813900614)

This 20 gauge barrel is 26 and has a accu-set style choke. Its has a matte blued finish.

Specifications:

- Models: Mossberg 500 and Maverick 88 6-shot
- Gauge: 20 Gauge
- Length: 26
- Sights: Bead
- Finish: Matte Blued
- Chokes Size: Accu-Set
- Purpose: Customization
- Type: All Purpose


  • 500 Barrel
  • Brand: Mossberg


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$183.88
Mossberg - 535 Barrel - 12 Gauge, 28" Barrel, Fiber Optic Front Sight, Blued (015813913027)

This 535 shotgun barrel has a front bead fiber optic sight and a blued finish.

Specifications:

- Caliber or Gauge: 12 Gauge
- Length: 28
- Model: 535 ATS
- Sights: Fiber Optic Front
- Finish: Blued
- Type: All Purpose
- Chokes Included: Accu-Set
- Barrel Features: Vent Rib
- Purpose: Customization


  • 535 Barrel
  • Brand: Mossberg


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$216.64
Mossberg - 500 Barrel - 12 Gauge, 3" Chamber, 28" Barrel, Vent Rib, Accu-Set Choke, Matte Blue (015813901239)

This 12 gauge barrel is 28 and has a accu-set style choke and a bead sight. It has a matte blued finish.

Specifications:

- Caliber or Gauge: 12 Gauge
- Length: 28
- Model: 500
- Sights: Bead
- Finish: Blued
- Type: All Purpose
- Chokes Included: Accu-Set
- Purpose: Customization


  • 500 Barrel
  • Brand: Mossberg


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$183.88
Mossberg - 535 Barrel - 12 Gauge, 24" Barrel, Integral Scope Base/Cantilever Sights, MOBUC (015813913058)

This 535 shotgun barrel has a integral scope base/cantilever sight and a mossy oak break-up country style finish.

Specifications:

- Gauge: 12 Gauge
- Length: 24
- Model: 535 ATS
- Sights: Integral Scope Base/Cantilever
- Bore Type: Fully Rifled
- Finish: Mossy Oak Break-Up Country
- Type: Slug


  • 535 Barrel
  • Brand: Mossberg


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$216.64
Mossberg - 500 Barrel - 20 Gauge, 24" Barrel, Integral Scope Base Sights, Blued (015813900584)

This 20 gauge barrel is 24 and has a fully-rifled bore and has intergral scope base/cantilever. It has a matte blued finish.

Specifications:

- Caliber: 20 Gauge
- Length: 24
- Sights: Integral Scope Base
- Bore Type: Fully Rifled
- Finish: Matte Blued
- Purpose: Customization


  • 500 Barrel
  • Brand: Mossberg


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$183.88
Mossberg - 535 Barrel - Slug, 12 Gauge, 24" Barrel, Adjustable Rifle Sights, Mossy Oak Break-Up Country (015813913034)

This 535 shotgun barrel has a adjustable rifle sights and a mossy oak break-up country style finish.

Specifications:

- Model: 535 ATS
- Gauge: 12 Gauge
- Length: 24
- Sights: Adjustable Rifle
- Bore Type: Fully Rifled
- Finish: Mossy Oak Break-Up Country
- Type: Slug
- Purpose: Customization


  • 535 Barrel
  • Brand: Mossberg


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$216.64
Mossberg - 935 Barrel - 12 Gauge, 24" Barrel, Adjustable Rifle Sights, Mossy Oak Break-Up Country (015813909129)

This 935 shotgun barrel features adjustable rifle sights and a mossy oak break-up country style finish.

Specifications:

- Product: Model 935
- Gauge: 12 Gauge
- Length: 24
- Sights: Adjustable Rifle Sights
- Bore Type: Fully Rifled
- Finish: Mossy Oak Break-Up Country
- Type: Slug
- Purpose: Customization


  • 935 Barrel
  • Brand: Mossberg


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$244.60
Mossberg - 835 Barrel - Slug, 12 Gauge, 24" Barrel, Adjustable Rifle Sights, Blued (015813908054)

This 835 shotgun barrel features adjustable rifle sights and a matte blued finish.

Specifications:

- Model: 835 Ulti-Mag Slug
- Gauge: 12 Gauge
- Length: 24
- Sights: Adjustable Rifle
- Bore Type: Fully Rifled
- Finish: Blued
- Type: Slug
- Purpose: Customization


  • 835 Barrel
  • Brand: Mossberg


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$201.44
Mossberg - 500 Barrel - 12 Gauge, 24" Barrel, Adjustable Rifle Sights, Blued (015813901215)

This 12 gauge barrel is 24 and has a fully-rifled bore and has adjustable rifle sights. It has a matte blued finish.

Specifications:

- Caliber or Gauge: 12 Gauge
- Length: 24
- Model: 500
- Sights: Adjustable Rifle
- Bore Type: Fully Rifled
- Finish: Blued
- Purpose: Customization
- Product Model: 500


  • 500 Barrel
  • Brand: Mossberg


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$183.88
Mossberg - 835 Barrel - Slug, 12 Gauge, 24" Barrel, Adjustable Rifle Sights, Blued (015813908047)

This 835 shotgun barrel features adjustable rifle sights and a matte blued finish.

Specifications:

- Model: 835 Ulti-Mag Slug
- Gauge: 12 Gauge
- Length: 24
- Sights: Adjustable Rifle
- Bore Type: Cylinder Bore
- Finish: Blued
- Type: Slug
- Purpose: Customization


  • 835 Barrel
  • Brand: Mossberg


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$161.57
Mossberg - 535 Barrel - 12 Gauge, 24" Barrel. Integral Scope Base/Cantilever, Blued (015813913065)

This 535 shotgun barrel has a integral scope base/cantilever sight and a blued finish.

Specfications:

- Model: 535 ATS
- Gauge: 12 Gauge
- Length: 24
- Sights: Integral Scope Base/Cantilever
- Fully Rifled
- Finish: Blued
- Type: Slug
- Purpose: Customization


  • 535 Barrel
  • Brand: Mossberg


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$201.44
Mossberg - 500 Barrel - 20 Gauge, 3" Chamber, 24" Barrel, Cylinder Bore, Rifle Sights, Matte Blued (015813900645)

This 20 gauge barrel is 24 and has a fully-rifled bore and has adjustable rifle sights. It gas a matte blued finish.

Specifications:

- Caliber or Gauge: 20 Gauge
- Length: 24
- Sights: Adjustable Rifle
- Bore Type: Cylinder Bore
- Finish: Blued
- Type: Slug
- Purpose: Customization
- Product Model: 500


  • 500 Barrel
  • Brand: Mossberg


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$135.62
Mossberg - 535 Barrel - Slug, 12 Gauge, 24" Barrel, Adjustable Rifle Sights, Blued (015813913041)

This 535 shotgun barrel has adjustable rifle sights and a blued finish.

Specifications:

- Model: 535 ATS
- Gauge: 12 Gauge
- Length: 24
- Sights: Adjustable Rifle
- Bore Type: Fully Rifled
- Finish: Blued
- Type: Slug
- Purpose: Customization


  • 535 Barrel
  • Brand: Mossberg


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$216.64
CMMG, Inc - Barrel Sub-Assembly - 16.10? Bull 4140CM SBN, 5.56mm (815835018119)

Perfect for building your custom AR15 upper group the Bull profile improves shot to shot consistency during long strings. Every barrel comes with properly installed M4 barrel extension. All barrel sub-assemblies are properly headspaced.

Specifications:

- Length: 16.1?
- Profile: Bull
- Material: 4140 Chrome Moly
- Finish: Salt Bath Nitride Finish inside and out
- Twist: 1:7
- Caliber: 5.5645 NATO Chamber
- Gas Port: Mid length
- .936? Gas Journal


  • Barrel Sub-Assembly
  • Brand: CMMG Inc


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$169.76
CMMG, Inc - Barrel Sub-Assembly - 16.10? LT 4140CM SBN, 5.56mm (815835018102)

The 16.1? lightweight is the perfect barrel for building your custom lightweight AR15 upper group. Comes with properly installed M4 barrel extension. All barrel sub-assemblies are properly headspaced.

Specifications:

- Caliber: 5.5645 NATO Chamber
- Barrel: 16.1?
- Profile: Light Taper
- Material: 4140CM
- Finish: Salt Bath Nitride
- Twist: 1:7
- Threaded: 1/2-28
- Gas Port Location: Mid length
- .625? Gas Journal


  • Barrel Sub-Assembly
  • Brand: CMMG Inc


Thank you for shopping at Survivors Paradise Outdoor Supplies L.L.C.!
Out of Stock
$169.76
Per Page      1 - 50 of 110