Firearm Parts

Sort By:  
CMMG, Inc - Gas Block Assembly - Low Profile, .750" ID (852005002622)

cmmg gas block assembly low profile .750

color: black


  • gas block assembly low profile .750 id

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$38.25
CMMG, Inc - Gas Block Assembly - Low Profile, .625" ID (815835012780)

cmmg gas block assembly low profile .625

color: black


  • gas block assembly low profile .625 id

Thank you for shopping at Survivorsparadise.com!


$38.25
Sig Sauer - 2022 Parts Kit SP2022 9mm/357SIG/40S&W - (798681431335)

perform periodic maintenance on your most prized sig pistols. the kits include a selection of the most often requested replacement parts for all sig sauer pistols.

kits include:
- decocking lever spring
- slide catch lever spring
- trigger bar spring
- recoil spring
- slide pins and grip screws

fits: sig sauer sp2022 9mm .357 sig .40 s&w


  • 2022 parts kit sp2022 9mm/357sig/40s&w

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$27.00
Daniel Defense - Lower Parts Kits (Semi Auto) - (815604010160)

daniel defense is proud to offer this kit for those interested in assembling their own ar15. although there are many manufacturers of so-called mil-spec parts daniel defense has gone to great lengths to insure the parts provided are of the highest quality and compatible with a wide assortment of available receivers. however as daniel defense has developed this kit there has been a wide variety of lower receivers some from manufacturers of questionable quality. consequently some of daniel defense parts may not fit properly in some of these receivers. daniel defense always recommends purchasing the highest quality parts available to assemble your ar15. but if your receiver is not compatible with these parts for any reason daniel defense will gladly accept your return for a full refund.

daniel defense lower receiver parts kit! buy yours now!

kit includes:

- a2 pistol grip
- magpul enhanced polymer trigger guard
- pistol grip screw
- pistol grip lock washer
- ar-15 pivot pin
- bolt catch plunger
- bolt catch roll pin
- bolt catch spring
- buffer retainer pin
- buffer retainer spring
- disconnector spring
- magazine catch spring
- magazine release button
- two pivot/takedown detent pins
- two pivot/takedown detent springs
- rear takedown pin
- safety detent selector
- selector detent spring
- trigger guard roll pin
- trigger guard set screw
- two trigger/hammer pins
- bolt catch
- hammer spring
- magazine catch assembly
- safety semi-auto selector
- semi-auto disconnector
- semi-auto hammer w/ j-pin assembly
- semi-auto trigger
- trigger spring

specifications:

- weight: 7 oz.


  • lower parts kits semi auto

Thank you for shopping at Survivorsparadise.com!


$101.25
Daniel Defense - .315 Big Hole Upper Pivot Pin - (815604010382)

a .315 front pivot pin to fit the early colt lowers with .315 front holes. this eliminates the need to use an offset pin which requires 2 screwdrivers during assembly / disassembly of these rifles.


  • .315 big hole upper pivot pin

Thank you for shopping at Survivorsparadise.com!


$17.55
Daniel Defense - Low Profile Gas Block Clamp - .750 (815604010122)

this innovative low profile gas block not only weighs less than 2.0 ounces but clamps tightly to .750 diameter barrels. the daniel defense low profile gas block fits perfectly under all daniel defense rails. the daniel defense low profile gas block is constructed from 4150 hardened steel and military specification heavy phosphate coating.

features:

- solid steel construction
- military specification heavy phosphate coating
- precision cnc machined
- fits under all daniel defense rails
- clamps to barrel

specifications:

- product weight: 1.8 oz.
- inside diameter: 0.750
- attachment style: clamp


  • low profile gas block clamp

Thank you for shopping at Survivorsparadise.com!


$62.10
Daniel Defense - Mk 12 Gas Block .750 (Commercial) - (815604011761)

the mk12 gas block is only compatible with the ris ii m4a1 & mk18 family of rail systems manufactured by daniel defense. it is not compatible with any other daniel defense rail system. this is due to various clearance issues. this only applies to rail system lengths that would completely shroud the gas block. if you are mounting the gas block to the barrel without being shrouded by the rail system then this does not apply. in that case it will fit as long as barrel diameter is .750.

features:

- hardened 416 stainless steel
- black oxide coated
- precision cnc machined
- low profile gas block
- 2 set screws
- gas tube roll pin
- 0.5 ml. loctite 262 threadlocker

specifications:

- product weight: 1.9 oz.
- inside diameter: 0.750
- attachment style: set screws


  • mk 12 gas block .750 commercial

Thank you for shopping at Survivorsparadise.com!


$71.55
Leapers Inc. - Mil-Spec 6-Position Buffer Tube - (4712274526839)

utg pro utg pro us made mil-spec 6-position receiver extension tube

features:
- 6-position receiver extension tube with mil-spec diameter for ar15 rifles
- precision machined from 6061/t6 aircraft grade aluminum
- matte black anodizing with mil-spec type iii hardcoat class ii
- tightest tolerance control for zero-gap fit with polymer stock and receiver to meet most demanding silent operations
- 100% proudly made in usa for most serious users


  • mil-spec 6-position buffer tube

Thank you for shopping at Survivorsparadise.com!


$20.57
Leapers Inc. - UTG AR15 Collapsible Stock Receiver Plate - (4712274528161)

utg utg model 4/ar15 collapsible stock receiver plate

features:
- robust steel construction with wear resistant matte black finish
- adaptor features dual optimally shaped sling loops to accommodate ambidextrous strap and metal hook sling applications
- compatible with most sling hooks on the market


  • utg ar15 collapsible stock receiver plate

Thank you for shopping at Survivorsparadise.com!


$5.63
Hogue - AR15 Trigger Guard - Olive Drab Green (743108150986)

hogue trigger guards are straight or curved and come in our polymer and g10 material in a variety of colors. this product includes roll pin for easy installation. g10 is a high-pressure thermoset plastic laminate consisting of multiple layers of woven fiberglass mesh cloth impregnated with an epoxy resin binder. it can be produced with many layers of the same color or different colors to achieve a specific cosmetic look. typical g10 is made of only flat layers. hogue inc. has a new patent-pending method of producing g10 material called g-mascus. this method produces different patterns within the colored material which
produces a unique look.

color: od green


  • ar15 trigger guard

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$7.51
Sig Sauer - Replacement Parts Kit 1911 Pistols - (798681512850)

factory replacement parts kit for 1911 pistols.

kit includes:

- mainspring
- grip screw bushings
- extractor spring
- firing pin spring
- recoil spring
- grip screw
- extractor pin
- o ring


  • replacement parts kitm 1911 pistols

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$27.00
Daniel Defense - AR15 Barrel Nut - (815604010733)

daniel defense ar15 barrel nut black


  • ar15 barrel nut

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$9.45
Daniel Defense - Muzzle Climb Mitigator Gen II - (815604018043)

the daniel defense muzzle climb mitigator gen ii redirects propellant gasses through calibrated ports countering both recoil and muzzle climb. less recoil and muzzle climb results in quicker more precise follow-up shots and reduced fatigue. if you are looking to instantly reduce recoil and muzzle jump pick up one of these daniel defense muzzle brakes up today!

specifications:

- caliber: .22 caliber/5.56mm
- material: 17-4 stainless steel
- thread pitch: 1/2-28
- length: 1.875
- weight: 2.52 oz
- finish: black nitride


  • muzzle climb mitigator gen ii

Thank you for shopping at Survivorsparadise.com!


$70.20
CMMG, Inc - Upper Group - MK47 AKS13, 7.62 x 39mm, SBN (815835017860)

the mk47 aks13 is one of cmmg newest mk47 upper groups and features the krink muzzle device pinned and welded to a 13? barrel to meet the 16? legal requirement. additionaly it features a pinned on gas block for improved reliability. the mk47 aks8 features cmmgs mid-sized receiver based on the mk3 platform carved from billet 7075-t6 aluminum. the mk47 was designed to harness the power and reliability of the 7.62x39mm cartridge utilizing a robust bolt based off cmmg mk3 .308. every upper comes equipped with a krink muzzle device pinned gas block.

caliber: 7.62x39mm
color: black


  • upper group

Thank you for shopping at Survivorsparadise.com!


$1,209.32
CMMG, Inc - Upper Group - MK47 T, 7.62 x 39mm, SBN (815835017839)

the mk47 t is the entry level 16.10? barreled version of the mk47 uppers. the mk47 t features cmmgs mid-sized receiver based on their mk3 platform carved from billet 7075-t6 aluminum. it also features an improved 15? hand guard designed to be compatible with aftermarket muzzle devices and suppressors. the mk47 was designed to harness the power and reliability of the 7.62x39mm cartridge utilizing a robust bolt based off their mk3 .308. every upper comes equipped with an a2 flash hider

color: black


  • upper group

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$1,065.35
Wheeler - Professional Digital Trigger Gauge - (661120109044)

wheeler professional digital trigger gauge

features:

- ergonomic over molded design
- 0-12 lbs. range
- +/- .1 oz. accuracy
- load sensor directly contacts the trigger
- feature maximum minimum average and live functions
- audible indicator tone
- low battery indicator
- soft touch buttons
- arm folds inside housing to protect the load sensor when not in use
- foam lined storage case


  • professional digital trigger gauge

Thank you for shopping at Survivorsparadise.com!


$57.52
Surefire - 3 Prong Flash Hider - For 7.62 Caliber and 5/8-24 (084871324380)

the advanced surefire surefire 3p eliminator 762 three-prong flash hider which fits ar-10 weapons and variants with 5/8x24 muzzle threads features a patent-pending design that greatly reduces muzzle flash typically greater than 99%when compared with a plain muzzle. boasting robust tines built to withstand the rigors of combat the surefire 3p eliminator 762 duplicates the key functional design elements of the surefire sf3p flash hider but unlike the latter it cannot be used to mount surefire socom suppressors.

precision machined from us mill-certified steel bar stockincluding high-precision single-point cut threads for optimum thread interfacethe surefire 3p eliminator 762 muzzle brake has a black melonite finish that provides maximum protection under harsh environmental conditions and facilitates cleaning even after extreme use.

features:

- patent-pending design provides greater than a 99% reduction in flash compared to a plain muzzle
- precision machined from us mill-certified heat-treated stainless steel bar stock
- high-precision single-point cut barrel threads for optimum thread interface
- inspected for all critical dimensions including concentricity and alignment
- black melonite coating provides maximum protection against harsh environmental conditions and facilitates cleaning after extreme use
- installation requires no permanent modifications for ar-10 type weapons

specifications:

- fits: ar-10 and variants with 5/8x24 muzzle threads
- caliber: 7.56 mm .308 caliber
- length: 2.67


  • 3 prong flash hider

Thank you for shopping at Survivorsparadise.com!


$39.41
Tapco - Intrafuse Commercial AR Carbine Receiver Extension Tube - (751348007304)

intrafuse commercial ar carbine receiver extension tube

specifications:

- color: black
- length: 7.75


  • intrafuse commercial ar carbine receiver extension tube

Thank you for shopping at Survivorsparadise.com!


$18.72
Patriot Ordnance - Ultimate DI Bolt Carrier Group, .223 - (847313007551)

upgrade your direct impingement ars with the ultimate bolt carrier group.

the ultimate bolt carrier group was developed to solve simple issues that plague the standard direct impingement bolt carrier group. our ultimate bolt carrier group is machined from a solid piece of alloy steel eliminating the need to stake the gas key and deleting the ability for gas key screws to come loose under operation. the carrier itself is np3 coated and features a chrome plated bolt. this group features a stainless steel gas inlet tube that is pressed and pinned into the solid gas key. this tube has been designed to allow ample clearance for the removal of the roller cam pin during maintenance.

specifications:

- weight: .70 lbs


  • ultimate di bolt carrier group .223

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$289.17
Patriot Ordnance - Dictator 9 Position Gas Block - Carbine Lenth, Direct Impingement, GasTube (847313008374)

this 9 position adjustable di gas block provides the ultimate range of adjustability and versatility. the addition of a suppressor typically i
ncreases the level of back pressure within the rifle system. this increase will prematurely wear parts and increase the amount of gas/carbon introduced into the chamber. with the dictator you can now control that rate of fire gas flow and ultimately the reliability of your system.

adjusting the gas system is easy the front of the gas block has a dial that accepts a flat screwdriver 3/32 hex wrench and dictation tool included in the dictator gas block kit.

the dictator features a straight gas tube but why? the advantage of a straight gas tube is that we eliminate the heat buildup that exists at the bent portion of a standard gas tube. this feature is extremely important for select-fire and/or suppressed rifles which are subject to very high heat levels. by reducing the built up heat you now have a more reliable longer lasting gas system.

each dictator gas block kit comes complete with the applicable length gas tube.

specifications:

- caliber: .223/5.56mm
- gas system length: carbine


  • dictator 9 position gas block

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$122.89
Patriot Ordnance - Dictator 9 Position Gas Block - Mid Length, Direct Impingement, GasTube (847313008381)

this 9 position adjustable di gas block provides the ultimate range of adjustability and versatility. the addition of a suppressor typically i
ncreases the level of back pressure within the rifle system. this increase will prematurely wear parts and increase the amount of gas/carbon introduced into the chamber. with the dictator you can now control that rate of fire gas flow and ultimately the reliability of your system.

adjusting the gas system is easy the front of the gas block has a dial that accepts a flat screwdriver 3/32 hex wrench and dictation tool included in the dictator gas block kit.

the dictator features a straight gas tube but why? the advantage of a straight gas tube is that we eliminate the heat buildup that exists at the bent portion of a standard gas tube. this feature is extremely important for select-fire and/or suppressed rifles which are subject to very high heat levels. by reducing the built up heat you now have a more reliable longer lasting gas system.

each dictator gas block kit comes complete with the applicable length gas tube.

specifications:

- caliber: .223/5.56mm
- gas system length: mid length


  • dictator 9 position gas block

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$122.89
Patriot Ordnance - Dictator 9 Position Gas Block - Rifle Length, Direct Impingement, GasTube (847313008398)

this 9 position adjustable di gas block provides the ultimate range of adjustability and versatility. the addition of a suppressor typically i
ncreases the level of back pressure within the rifle system. this increase will prematurely wear parts and increase the amount of gas/carbon introduced into the chamber. with the dictator you can now control that rate of fire gas flow and ultimately the reliability of your system.

adjusting the gas system is easy the front of the gas block has a dial that accepts a flat screwdriver 3/32 hex wrench and dictation tool included in the dictator gas block kit.

the dictator features a straight gas tube but why? the advantage of a straight gas tube is that we eliminate the heat buildup that exists at the bent portion of a standard gas tube. this feature is extremely important for select-fire and/or suppressed rifles which are subject to very high heat levels. by reducing the built up heat you now have a more reliable longer lasting gas system.

each dictator gas block kit comes complete with the applicable length gas tube.

specifications:

- caliber: .223/5.56mm
- gas system length: rifle


  • dictator 9 position gas block

Thank you for shopping at Survivorsparadise.com!


$149.99
Patriot Ordnance - .233 Tomahawk Ambidextrous Charging Handle - (847313008497)

smoke the pipe of peace bury the tomahawk and become one nation. general zebulon pike. cover both sides of the charge by upgrading your current charging handle with the ambidextrous tomahawk charging handle. while the shape and laser engraving are inspired by the design of our pof-usa american patriot tomahawk the tomahawk charging handle has optimized functionality as well. for quick and efficient operation with either hand it features over-sized levers on both sides to make palm blading or finger thumb charging a breeze.

all components have been cnc machined to exacting standards in the usa from american 7075 billet aluminum and finished with durable black type iii hard coat anodize.

specifications:

- caliber: .223
- dimensions: 7 x 5 x 5
- weight: .10 lbs


  • .233 tomahawk ambidextrous charging handle

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$70.83
Patriot Ordnance - Dictator 9 Position Gas Block - .308, Rifle Length, Direct Impingement Gas Tube (847313008558)

this 9 position adjustable di gas block provides the ultimate range of adjustability and versatility. the addition of a suppressor typically increases the level of back pressure within the rifle system. this increase will prematurely wear parts and increase the amount of gas/carbon introduced into the chamber. with the dictator you can now control that rate of fire gas flow and ultimately the reliability of your system.
adjusting the gas system is easy the front of the gas block has a dial that accepts a flat screwdriver 3/32 hex wrench and dictation tool included in the dictator gas block kit.

the dictator features a straight gas tube but why? the advantage of a straight gas tube is that we eliminate the heat buildup that exists at the bent portion of a standard gas tube. this feature is extremely important for select-fire and/or suppressed rifles which are subject to very high heat levels. by reducing the built up heat you now have a more reliable longer lasting gas system.

each dictator gas block kit comes complete with the applicable length gas tube. this gas block is setup for barrels


  • dictator 9 position 308 gas block rifle length di gas tube

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$122.89
Patriot Ordnance - Dictator 9 Position Gas Block Pistol Length DI Gas Tube - (847313008619)

this 9 position adjustable di gas block provides the ultimate range of adjustability and versatility. the addition of a suppressor typically increases the level of back pressure within the rifle system. this increase will prematurely wear parts and increase the amount of gas/carbon introduced into the chamber. with the dictator you can now control that rate of fire gas flow and ultimately the reliability of your system.

adjusting the gas system is easy the front of the gas block has a dial that accepts a flat screwdriver 3/32 hex wrench and dictation tool included in the dictator gas block kit.

the dictator features a straight gas tube but why? the advantage of a straight gas tube is that we eliminate the heat buildup that exists at the bent portion of a standard gas tube. this feature is extremely important for select-fire and/or suppressed rifles which are subject to very high heat levels. by reducing the built up heat you now have a more reliable longer lasting gas system.

each dictator gas block kit comes complete with the applicable length gas tube. the 2 lengths currently available are carbine and mid-length. this gas block is setup for barrels manufactured for a .750 gas block.

gas system length: pistol length


  • dictator 9 position gas block pistol length di gas tube

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$122.89
Patriot Ordnance - Flash Hider and Locknut Kit - 223 Caliber (847313008701)

the pof-usa flash hider was designed in house by the engineering team at patriot ordnance factory. this muzzle device; is an excellent job at eliminating the large majority of muzzle flash without adding a bulky device to your weapon system. each device is pre-drilled with a pin hole to make permanently attaching this device much easier should your specific situation call for such action.

specifications:

- caliber: .223.5.56mm
- threads: 1/228
- color: black


  • flash hider and locknut kit

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$56.38
Patriot Ordnance - Flash Hider and Locknut Kit - 308 Caliber (847313008718)

the pof-usa flash hider was designed in house by the engineering team at patriot ordnance factory. this muzzle device; is an excellent job at eliminating the large majority of muzzle flash without adding a bulky device to your weapon system. each device is pre-drilled with a pin hole to make permanently attaching this device much easier should your specific situation call for such action.

specifications:

- caliber: .308/7.6251
- threads: 5/824
- color: black


  • flash hider and locknut kit

Thank you for shopping at Survivorsparadise.com!


$58.99
Patriot Ordnance - Renegade Rail Kit, 14.50"with Heat Sink Barrel Nut - (847313009050)

patriot ordnance renegade rail kit 14.5 with heat sink barrel nut


  • renegade rail kit 14.50with heat sink barrel nut

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$195.18
FosTech Outdoors - Echo AR II Drop in Trigger - (639266299387)

the echo trigger is a ground breaking drop in design that is approved by the atf.

the echo trigger allows the shooter to select from 3 different settings:
safe mode: firearm will not fire.
semi-automatic mode: firearm fires when trigger is pulled.
echo mode: firearm fires whem trigger is pulled and also when trigger is released.

the echo trigger is designed with safety being the upmost priority.when the shooter is in the echo mode and depresses the trigger one round is firedif the target movesthe shooter can move the selector to the safe position and a second round will not fire upon release.

features:

- patented design that gained atf approvalpatent # us 8820211 b1
- drop-in design technology for the ar-15 platformlicensed through mossberg
- technology licensed through hyperfire inside the echo trigger
- lightclean and crisp pull in semi-automatic mode
- the echo trigger is packed full of cutting edge technology
- reliable function in echo mode


  • echo trigger

Thank you for shopping at Survivorsparadise.com!


$487.50
Mission First Tactical - E-VolV AR15 Enhanced Trigger Guard - Black (814002020160)

the e- volv enhanced trigger guard replaces factory trigger guard and oversized opening offers full access to the trigger including gloved hands. polymer trigger guard held in place with included standard roll pins.

features:

- polymer
- offers full access to the trigger
- hardware included

specifications:

- color: black
- platform ar-15
- style extended
- type trigger guard


  • e-volv ar15 enhanced trigger guard

Thank you for shopping at Survivorsparadise.com!


$6.47
Mission First Tactical - E-VolV AR15 Enhanced Trigger Guard - Scorched Dark Earth (814002020627)

the e- volv enhanced trigger guard replaces factory trigger guard and oversized opening offers full access to the trigger including gloved hands. polymer trigger guard held in place with included standard roll pins.

features:

- polymer
- offers full access to the trigger
- hardware included

specifications:

- color: scorched dark earth
- platform ar-15
- style extended
- type trigger guard


  • e-volv ar15 enhanced trigger guard

Thank you for shopping at Survivorsparadise.com!


$6.47
Mission First Tactical - E-VolV LowPro Gas Block, .750 Steel Phosphate - (676315033868)

the e- volv low profile gas block 1 length was designed for use with the ar15 m4 and m16. 1 inches long constructed out of steel with a manganese phosphate finish. fits .750 barrels and mounts utilizing knurled cup pin steel set screws. allows usage with handguard systems that extend past the standard gas port location on the barrel. made in the usa.

features:

- steel with a manganese phosphate finish
- mounts utilizing knurled cup pin steel set screws

specifications:

- color: black
- fits: .750 barrels


  • e-volv lowpro gas block .750 steel phosphate

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$25.88
Mission First Tactical - E-VolV Overszd Charge Handle Latch Only AR15 - (676315033875)

the e-volv oversized charging handle latch is designed for use with the ar15 m4 and m16. the e2ochl replaces the standard charging handle latch in minutes. the oversized latch allows for easy manipulation of the charging handle especially with gloved hands. made in the usa.

features:

- oversized charging handle latch
- replaces the standard charging handle latch
- provides positive manipulation of the charging handle

specifications:

- color: black


  • e-volv overszd charge handle latch only ar15

Thank you for shopping at Survivorsparadise.com!


$14.31
Mission First Tactical - Polymer Mag Floor Plate - Green, Per 6 (676315034049)

mft polymer magazine floor plate is designed for use with the mfts scpm556 and 10pm556 magazines. great for 3 gun competitions prepper storage and law enforcement officers. for anyone who uses more than one brand bullet weight or round count of ammunition and/or multiple caliber rifles. color is the simplest way to identify your magazines. made in the usa with a lifetime warranty.

features and functions:

- paint pen dot matrix
- flared floor plate

specifications:

- fits: for use with mfts scpm556 and 10pm556
- color: green
- quantity: 6


  • polymer mag floor plate

Thank you for shopping at Survivorsparadise.com!


$8.42
Mission First Tactical - Polymer Mag Floor Plate - Orange, Per 6 (676315034056)

mft polymer magazine floor plate is designed for use with the mfts scpm556 and 10pm556 magazines. great for 3 gun competitions prepper storage and law enforcement officers. for anyone who uses more than one brand bullet weight or round count of ammunition and/or multiple caliber rifles. color is the simplest way to identify your magazines. made in the usa with a lifetime warranty.

features and functions:

- paint pen dot matrix
- flared floor plate

specifications:

- fits: for use with mfts scpm556 and 10pm556
- color: orange
- quantity: 6


  • polymer mag floor plate

Thank you for shopping at Survivorsparadise.com!


$8.42
Mission First Tactical - Polymer Mag Floor Plate - Red, Per 6 (676315034063)

mft polymer magazine floor plate is designed for use with the mfts scpm556 and 10pm556 magazines. great for 3 gun competitions prepper storage and law enforcement officers. for anyone who uses more than one brand bullet weight or round count of ammunition and/or multiple caliber rifles. color is the simplest way to identify your magazines. made in the usa with a lifetime warranty.

features and functions:

- paint pen dot matrix
- flared floor plate

specifications:

- fits: for use with mfts scpm556 and 10pm556
- color: red
- quantity: 6


  • polymer mag floor plate

Thank you for shopping at Survivorsparadise.com!


$8.42
Mission First Tactical - Polymer Mag Floor Plate - Yellow, Per 6 (676315034070)

mft polymer magazine floor plate is designed for use with the mfts scpm556 and 10pm556 magazines. great for 3 gun competitions prepper storage and law enforcement officers. for anyone who uses more than one brand bullet weight or round count of ammunition and/or multiple caliber rifles. color is the simplest way to identify your magazines. made in the usa with a lifetime warranty.

features and functions:

- paint pen dot matrix
- flared floor plate

specifications:

- fits: for use with mfts scpm556 and 10pm556
- color: yellow
- quantity: 6


  • polymer mag floor plate

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$8.42
Advanced Technology Intl - TactLite Stock Shell Carrier Black - (815511020375)

tactlite stock shell carrier

features:

- stock-mounted shell carrier
- holds 5 12 gauge shotgun shells
- military type iii anodized 6061 t6 aluminum mounting bar
- mounts to the cheekrest while still allowing the adjustment of the cheekrest
- can be added to either side of the stock

specifications:

- color: black
- fits: ravenwood stocks with cheekrest attached


  • tactlite stock shell carrier black

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$19.56
Ruger (Sturm, Ruger & Co, Inc) - Trigger - BX for 10/22 (736676904624)

the bx-trigger was designed for easy installation superior performance and legendary ruger reliability. like the popular bx-25 magazine for the 10/22 the bx-trigger will deliver the excellence and value that shooters have come to expect from ruger.

the trigger offers a light crisp drop-in replacement trigger assembly that is compatible with all ruger 10/22 rifles and 22 charger pistols. the bx-trigger is a genuine ruger factory accessory and is the perfect upgrade for all 10/22 rifles and 22 charger pistol models because of the significantly reduced pull weight of approximately 2.75 pounds versus 6 pounds on the standard 10/22 trigger.

features:

- light and crisp 2.5 - 3.0 lb. trigger pull-
- minimal overtravel and positive reset -
- easy drop-in installation -
- genuine ruger factory accessory

specifications:

- fit: ruger 10/22 or 22 charger pistol
- material: polymer
- finish: black
- trigger pull: 2.5 3.0 lb.


  • trigger

Thank you for shopping at Survivorsparadise.com!


$72.90
Tactical Solutions - 10/22 .920" Compensator - Gloss Black (856365001226)

the x-ring 10/22 compensators are a simple addition to spruce up any 1/2x28 .22lr pistol or rifle. with 360 degree ports the compensators help reduce muzzle flip but also adds a little pizazz to your existing platform.

specifications:

- color/finish: gloss black


  • 10/22 .920 compensator

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$36.38
Tactical Solutions - Ruger 10/22 Performance Extended Magazine Release - Matte Black (879971001091)

allows you to quickly change magazines in your 10/22 rifle. easily installs in a couple of minutes without gunsmithing.

features:

- ergonomic drop in upgrade replaces small factory magazine release increasing speed of reloads
- precision machined from solid billet of 6061-t6 aluminum

specifications:

- fits: designed to fit factory ruger 10/22 trigger groups
- color: matte black


  • ruger 10/22 performance extended magazine release

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$36.38
Tactical Solutions - Pac-Lite 1" Compensator - Gloss Black (879971001305)

the pac-lite compensators are a simple addition to spruce up any 1/2x28 .22lr pistol or rifle. with 360 degree ports our compensators help reduce muzzle flip but also adds a little pizazz to your existing platform.

finish: gloss black


  • pac-lite 1 compensator

Thank you for shopping at Survivorsparadise.com!


$26.56
Tactical Solutions - Pac-Lite 1" Compensator - Matte Black (879971001190)

the pac-lite compensators are a simple addition to spruce up any 1/2x28 .22lr pistol or rifle. with 360 degree ports our compensators help reduce muzzle flip but also adds a little pizazz to your existing platform.

color: matte black


  • pac-lite 1 compensator

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$36.38
Tactical Solutions - Pac-Lite 1" Compensator - Silver (879971001299)

the pac-lite compensators are a simple addition to spruce up any 1/2x28 .22lr pistol or rifle. with 360 degree ports our compensators help reduce muzzle flip but also adds a little pizazz to your existing platform.

finish: silver


  • pac-lite 1 compensator

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$36.38
Hogue - Sig Sauer P238/P938 Sear Spring - (743108017005)

sig sauer changed the design of the sear spring in p238 and p938 models. hogue has since updated the mainspring housings to fit these updated style sear springs.

specifications:

- fits: sig p238 and p938 models


  • sig sauer p238/p938 sear spring

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$8.67
Franklin Armory - Binary Firing System Gen 3 - (818725010859)

the revolutionary binary firing system will be appreciated by three gun competitors tactical shooters and recreational enthusiasts. it features a three position selector that allows the user to switch from mode 1 for safe mode 2 for traditional semiautomatic mode or mode 3 for binary mode. in binary mode the firearm will discharge one round with every function of the trigger whether a pull or a release. a user can negate the round that would otherwise be fired during the release function by simply moving the selector back to mode 2 and then safely releasing the trigger.

features:

- easy to installation. no custom fitting.
- better trigger pull. 4.5 pounds +-.5 pound
- the release phase now has a positive reset.
- the design eliminates backup disconnector.
- stronger buffer spring included reduces the possibility of hammer follow.

specifications:

- works in every ar application: ar10 ar15 mpx etc.
- works in the f17 series in .17 wsm without modification.
- works on .22lr uppers without modification.
- works on 9mm uppers without modification.


  • binary firing system gen 3

Thank you for shopping at Survivorsparadise.com!


$404.99
Leapers Inc. - UTG Pro Mil Spec 6 Position Receiver Extension Tube Kit - Flat Dark Earth (4717385551978)

utg pro mil-spec fde 6 position receiver extension tube kit

features:

- 6 position mil-spec diameter receiver extension tube for ar15 rifles
- extension tube cnc machined from 6061-t6 aircraft grade aluminum with precisely rolled threads for durable thread engagement with lower receiver
- in house fde cerakote extension tube with matte black type iii class ii hard coat anodize components

includes:

- in house fde cerakote mil-spec 6 position extension tube
- carbine buffer
- buffer spring
- receiver end plate
- castle nut

-specifications:

- material:aluminum
- height: 1.45
- length: 7.25
- weight: 9.3 oz
- color: flat dark earth


  • utg pro mil spec 6 position receiver extension tube kit

Thank you for shopping at Survivorsparadise.com!


$37.08
Leapers Inc. - UTG Pro Mil Spec 6 Position Receiver Extension Tube Kit - Black (4717385551961)

utg pro mil-spec 6 position receiver extension tube kit

features:

- 6 position mil-spec diameter receiver extension tube for ar15 rifles
- extension tube cnc machined from 6061-t6 aircraft grade aluminum with precisely rolled threads for durable thread engagement with lower receiver
- finished in matte black type iii class ii hard coat anodize

includes:

- mil-spec 6 position extension tube
- carbine buffer
- buffer spring
- receiver end plate
- castle nut

specifications:

- material: aluminum
- height: 1.45
- length: 7.25
- weight: 9.3 oz
- color: black


  • utg pro mil spec 6 position receiver extension tube kit

Thank you for shopping at Survivorsparadise.com!


$31.78
CMMG, Inc - HD Pivot and Takedown Pins Parts Kit Mk3 - (815835018072)

cmmg inc. makes high quality parts and accessories for the mk3/lr308 and .308 ar platform. this particular part is necessary for completing your lr308 lower receiver or makes a great spare. this small parts kit features an hd pivot and takedown pins. cmmg manufacturers these parts to strict tolerances to ensure high quality and years of reliable service.

features:

- mk3/lr308 hd pivot/takedown pins
- divot in pins
- slightly longer to aid in removal
- comes with spring and detent

specifications:

- fits: cmmg mk3/dpms lr308 and similar pattern .308 ar lower receivers
- color: matte black


  • parts kit mk3 hd pivot and takedown pins

Thank you for shopping at Survivorsparadise.com!


Out of Stock
$22.57
FN - FNX-40 Slide Assembly - Black (845737005771)

fnx-9 standard slide assembly black. this complete slide from fn america comes preassembled by fn and is ready to install with all component parts included. this part is a fn america factory oem part. made to the same factory specifications materials and standards as the parts currently in your fn america firearm. feel secure in knowing the part you order will be the same as the worn or missing part from your fn america firearm.

assembly includes:

- cold hammer-forged barrel
caliber: 9mm
length: 4
twist: 1:10 rh
- stainless steel construction
- polished chamber and feed ramp
- 3-dot deep-v rear notch sights
- brushed stainless barrel finish
- black pvd slide finish
- recoil spring assembly


  • fnx-40 slide assembly

Thank you for shopping at Survivorsparadise.com!


$304.14
Per Page      1 - 50 of 346